[dpdk-dev] Debugging igbvf_pmd
Sambath Kumar Balasubramanian
sambath.balasubramanian at gmail.com
Sat Nov 2 23:56:29 CET 2013
Sorry pressed the send button too soon. The NIC Card we are using is
Intel Corporation 82576 Virtual Function (rev 01)
Do we need to do now NIC/CPU low level debugging or is there some issue in
the sw that could cause the packet to be dropped below this log message.
PMD: eth_igb_xmit_pkts(): port_id=3 queue_id=0 pktlen=60 tx_first=14
tx_last=14
PMD: eth_igb_xmit_pkts(): port_id=3 queue_id=0 tx_tail=15 nb_tx=1
Thanks,
Sambath
On Sat, Nov 2, 2013 at 3:54 PM, Sambath Kumar Balasubramanian <
sambath.balasubramanian at gmail.com> wrote:
> Hi,
>
> We are developing an App over DPDK and in one scenario with SR-IOV with
> one of the VFs mapped to a VM and DPDK running on the VM, we see that the
> packets are not coming on the wire but I get the following debug logs for
> every packet transmitted. We are getting the same format of packets on the
> wire in a different scenario so IMO the Virtual Function ports are set up
> properly. Any idea how this can be debugged further. The NIC card we are
> using is
>
>
>
> PMD: eth_igb_xmit_pkts(): port_id=3 queue_id=0 pktlen=60 tx_first=14
> tx_last=14
>
> PMD: eth_igb_xmit_pkts(): port_id=3 queue_id=0 tx_tail=15 nb_tx=1
>
> Regards,
> Sambath
>
>
More information about the dev
mailing list