[dpdk-dev] pci_unbind.py failure
Jyotiswarup Raiturkar
jyotisr5 at googlemail.com
Wed Nov 13 12:17:46 CET 2013
hi
I got my application running inside a vm (vmplayer) where the VM emulates a
e1000 NIC (82545EM). But rte_eth_dev_count() seems to return 0.. From the
website looks like it's a supported NIC . My lspci and pci_ubind status is
below. Any pointers?
# ./tools/pci_unbind.py --status
Network devices using IGB_UIO driver
====================================
0000:02:06.0 '82545EM Gigabit Ethernet Controller (Copper)' drv=igb_uio
unused=e1000
Network devices using kernel driver
===================================
0000:02:01.0 '79c970 [PCnet32 LANCE]' if=eth1 drv=pcnet32 unused= *Active*
Other network devices
=====================
<none>
# lspci -vt
-[0000:00]-+-00.0 Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
+-01.0-[01]--
+-07.0 Intel Corporation 82371AB/EB/MB PIIX4 ISA
+-07.1 Intel Corporation 82371AB/EB/MB PIIX4 IDE
+-07.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI
+-07.7 VMware Virtual Machine Communication Interface
+-0f.0 VMware SVGA II Adapter
+-10.0 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual
Ultra320 SCSI
+-11.0-[02]--+-00.0 VMware USB1.1 UHCI Controller
| +-01.0 Advanced Micro Devices [AMD] 79c970
[PCnet32 LANCE]
| +-02.0 Ensoniq ES1371 [AudioPCI-97]
| +-03.0 VMware USB2 EHCI Controller
| +-05.0 VMware Device 07e0
| \-06.0 Intel Corporation 82545EM Gigabit Ethernet
Controller (Copper)
+-15.0-[03]--
+-15.1-[04]--
+-15.2-[05]--
+-15.3-[06]--
+-15.4-[07]--
+-15.5-[08]--
+-15.6-[09]--
+-15.7-[0a]--
+-16.0-[0b]--
+-16.1-[0c]--
+-16.2-[0d]--
+-16.3-[0e]--
+-16.4-[0f]--
+-16.5-[10]--
+-16.6-[11]--
+-16.7-[12]--
+-17.0-[13]--
+-17.1-[14]--
+-17.2-[15]--
+-17.3-[16]--
+-17.4-[17]--
+-17.5-[18]--
+-17.6-[19]--
+-17.7-[1a]--
+-18.0-[1b]--
+-18.1-[1c]--
+-18.2-[1d]--
+-18.3-[1e]--
+-18.4-[1f]--
+-18.5-[20]--
+-18.6-[21]--
\-18.7-[22]--
Regards
Jyotiswarup
On Tue, Nov 5, 2013 at 9:34 PM, Cyril Cressent <cyril.cressent at intel.com>wrote:
> On Tue, Nov 05, 2013 at 08:01:06PM +0530, Jyotiswarup Raiturkar wrote:
>
> > Thanks for the quick reply. I saw some definitions of e1000_phy_82579
> hence
> > I thought (hoped) the NIC would be supported. I will try to run my dpdk
> app
> > inside a VM with an emulated e1000 NIC (just to test the code ..).
>
> As a general rule, even if you find references to a NIC in the poll mode
> drivers, if it's not listed in
> lib/librte_eal/common/include/rte_pci_dev_ids.h
> then consider the NIC as not supported.
>
> Good luck with the VM,
>
> Cyril
>
More information about the dev
mailing list