[dpdk-dev] [PATCH v5 2/3] mbuf:add three TX ol_flags and repalce PKT_TX_VXLAN_CKSUM
Zhang, Helin
helin.zhang at intel.com
Thu Dec 4 07:52:05 CET 2014
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Olivier MATZ
> Sent: Wednesday, December 3, 2014 10:42 PM
> To: Ananyev, Konstantin; Liu, Jijiang; dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v5 2/3] mbuf:add three TX ol_flags and repalce
> PKT_TX_VXLAN_CKSUM
>
> Hi Konstantin,
>
> On 12/03/2014 01:59 PM, Ananyev, Konstantin wrote:
> >> I still think having a flag IPV4 + another flag IP_CHECKSUM is not
> >> appropriate.
> >
> > Sorry, didn't get you here.
> > Are you talking about our discussion should PKT_TX_IP_CKSUM and
> PKT_TX_IPV4 be mutually exclusive or not?
>
> Yes
>
> >> I though Konstantin agreed on other flags, but I may have
> >> misunderstood:
> >>
> >> http://dpdk.org/ml/archives/dev/2014-November/009070.html
> >
> > In that mail, I was talking about my suggestion to make PKT_TX_IP_CKSUM,
> PKT_TX_IPV4 and PKT_TX_IPV6 to occupy 2 bits.
> > Something like:
> > #define PKT_TX_IP_CKSUM (1 << X)
> > #define PKT_TX_IPV6 (2 << X)
> > #define PKT_TX_IPV4 (3 << X)
> >
> > "Even better, if we can squeeze these 3 flags into 2 bits.
> > Would save us 2 bits, plus might be handy, as in the PMD you can do:
> >
> > switch (ol_flags & TX_L3_MASK) {
> > case TX_IPV4:
> > ...
> > break;
> > case TX_IPV6:
> > ...
> > break;
> > case TX_IP_CKSUM:
> > ...
> > break;
> > }"
> >
> > As you pointed out, it will break backward compatibility.
> > I agreed with that and self-NACKed it.
>
> ok, so we are back between:
>
> 1/ (Jijiang's patch)
> PKT_TX_IP_CKSUM /* packet is IPv4, and we want hw cksum */
> PKT_TX_IPV6 /* packet is IPv6 */
> PKT_TX_IPV4 /* packet is IPv4, and we don't want hw cksum */
>
> with PKT_TX_IP_CKSUM and PKT_TX_IPV4 exclusive
>
> and
>
> 2/
> PKT_TX_IP_CKSUM /* we want hw IP cksum */
> PKT_TX_IPV6 /* packet is IPv6 */
> PKT_TX_IPV4 /* packet is IPv4 */
There is another bit flag named 'PKT_TX_IPV4_CSUM' which uses the
same bit of 'PKT_TX_IP_CSUM'. It is for identifying if ipv4 hardware
checksum offload is needed or not.
It seems that we do not need 'PKT_TX_IPV6_CSUM'.
'PKT_TX_IPV4' and 'PKT_TX_IPV6' just indicates its packet type, and I guess
other features should not be contained in it, according to its name.
So here I got the option 3:
PKT_TX_IPV4_CKSUM /* we want hw IPv4 cksum */
PKT_TX_IPV6 /* packet is IPv6 */
PKT_TX_IPV4 /* packet is IPv4 */
>
> with PKT_TX_IP_CKSUM implies PKT_TX_IPV4
>
>
> Solution 2/ looks better from a user point of view. Anyone else has an opinion?
>
> Regards,
> Olivier
Regards,
Helin
More information about the dev
mailing list