[dpdk-dev] [PATCH v2] rte_ethdev: add link support flag

Stephen Hemminger stephen at networkplumber.org
Fri Jun 20 00:12:38 CEST 2014


Only some devices support the link state interrupt configuration option.
Link state control does not work in virtual drivers
(virtio, vmxnet3, igbvf, and ixgbevf). Instead of having the application
try and guess whether it will work or not provide a driver flag that
can be checked instead.

Note: if device driver doesn't support link state control, what
would happen previously is that the code would never detect link
transitions. This prevents that.

Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>

---
 lib/librte_eal/common/include/rte_pci.h |    2 ++
 lib/librte_ether/rte_ethdev.c           |   14 ++++++++++++++
 lib/librte_pmd_e1000/em_ethdev.c        |    2 +-
 lib/librte_pmd_e1000/igb_ethdev.c       |    2 +-
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c     |    2 +-
 5 files changed, 19 insertions(+), 3 deletions(-)

--- a/lib/librte_eal/common/include/rte_pci.h	2014-06-19 14:56:44.188081500 -0700
+++ b/lib/librte_eal/common/include/rte_pci.h	2014-06-19 14:56:44.184081479 -0700
@@ -197,6 +197,8 @@ struct rte_pci_driver {
 #define RTE_PCI_DRV_MULTIPLE 0x0002
 /** Device needs to be unbound even if no module is provided */
 #define RTE_PCI_DRV_FORCE_UNBIND 0x0004
+/** Device driver supports link state interrupt */
+#define RTE_PCI_DRV_LSC	0x0008
 
 /**< Internal use only - Macro used by pci addr parsing functions **/
 #define GET_PCIADDR_FIELD(in, fd, lim, dlm)                   \
--- a/lib/librte_pmd_e1000/em_ethdev.c	2014-06-19 14:56:44.188081500 -0700
+++ b/lib/librte_pmd_e1000/em_ethdev.c	2014-06-19 14:57:50.460429276 -0700
@@ -286,7 +286,7 @@ static struct eth_driver rte_em_pmd = {
 	{
 		.name = "rte_em_pmd",
 		.id_table = pci_id_em_map,
-		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_LSC,
 	},
 	.eth_dev_init = eth_em_dev_init,
 	.dev_private_size = sizeof(struct e1000_adapter),
--- a/lib/librte_pmd_e1000/igb_ethdev.c	2014-06-19 14:56:44.188081500 -0700
+++ b/lib/librte_pmd_e1000/igb_ethdev.c	2014-06-19 14:58:14.268554028 -0700
@@ -662,7 +662,7 @@ static struct eth_driver rte_igb_pmd = {
 	{
 		.name = "rte_igb_pmd",
 		.id_table = pci_id_igb_map,
-		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_LSC,
 	},
 	.eth_dev_init = eth_igb_dev_init,
 	.dev_private_size = sizeof(struct e1000_adapter),
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c	2014-06-19 14:56:44.188081500 -0700
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c	2014-06-19 14:57:31.060327549 -0700
@@ -1049,7 +1049,7 @@ static struct eth_driver rte_ixgbe_pmd =
 	{
 		.name = "rte_ixgbe_pmd",
 		.id_table = pci_id_ixgbe_map,
-		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_LSC,
 	},
 	.eth_dev_init = eth_ixgbe_dev_init,
 	.dev_private_size = sizeof(struct ixgbe_adapter),
--- a/lib/librte_ether/rte_ethdev.c	2014-06-19 14:56:44.188081500 -0700
+++ b/lib/librte_ether/rte_ethdev.c	2014-06-19 14:56:44.184081479 -0700
@@ -640,6 +640,20 @@ rte_eth_dev_configure(uint8_t port_id, u
 	memcpy(&dev->data->dev_conf, dev_conf, sizeof(dev->data->dev_conf));
 
 	/*
+	 * If link state interrupt is enabled, check that the
+	 * device supports it.
+	 */
+	if (dev_conf->intr_conf.lsc == 1) {
+		const struct rte_pci_driver *pci_drv = &dev->driver->pci_drv;
+
+		if (!(pci_drv->drv_flags & RTE_PCI_DRV_LSC)) {
+			PMD_DEBUG_TRACE("driver %s does not support lsc\n",
+					pci_drv->name);
+			return (-EINVAL);
+		}
+	}
+
+	/*
 	 * If jumbo frames are enabled, check that the maximum RX packet
 	 * length is supported by the configured device.
 	 */


More information about the dev mailing list