[dpdk-dev] [PATCH 1/3] ether: Add API to support administrative link up and down
Ouyang Changchun
changchun.ouyang at intel.com
Thu May 22 08:11:11 CEST 2014
This patch addes API to support administrative link up and down.
Signed-off-by: Ouyang Changchun <changchun.ouyang at intel.com>
---
lib/librte_ether/rte_ethdev.c | 38 ++++++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_ethdev.h | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 0ddedfb..06a0896 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -796,6 +796,44 @@ rte_eth_dev_stop(uint8_t port_id)
(*dev->dev_ops->dev_stop)(dev);
}
+int
+rte_eth_dev_admin_link_up(uint8_t port_id)
+{
+ struct rte_eth_dev *dev;
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-EINVAL);
+ }
+ dev = &rte_eth_devices[port_id];
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_admin_link_up, -ENOTSUP);
+ return (*dev->dev_ops->dev_admin_link_up)(dev);
+}
+
+int
+rte_eth_dev_admin_link_down(uint8_t port_id)
+{
+ struct rte_eth_dev *dev;
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-EINVAL);
+ }
+ dev = &rte_eth_devices[port_id];
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_admin_link_down, -ENOTSUP);
+ return (*dev->dev_ops->dev_admin_link_down)(dev);
+}
+
void
rte_eth_dev_close(uint8_t port_id)
{
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 2be6e4f..d33ff93 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -891,6 +891,12 @@ typedef int (*eth_dev_start_t)(struct rte_eth_dev *dev);
typedef void (*eth_dev_stop_t)(struct rte_eth_dev *dev);
/**< @internal Function used to stop a configured Ethernet device. */
+typedef int (*eth_dev_admin_link_up_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to link up a configured Ethernet device administratively. */
+
+typedef int (*eth_dev_admin_link_down_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to link down a configured Ethernet device administratively. */
+
typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev);
/**< @internal Function used to close a configured Ethernet device. */
@@ -1223,6 +1229,8 @@ struct eth_dev_ops {
eth_dev_configure_t dev_configure; /**< Configure device. */
eth_dev_start_t dev_start; /**< Start device. */
eth_dev_stop_t dev_stop; /**< Stop device. */
+ eth_dev_admin_link_up_t dev_admin_link_up; /**< Device link up administratively. */
+ eth_dev_admin_link_down_t dev_admin_link_down; /**< device link down admininstratively. */
eth_dev_close_t dev_close; /**< Close device. */
eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */
@@ -1696,6 +1704,32 @@ extern int rte_eth_dev_start(uint8_t port_id);
*/
extern void rte_eth_dev_stop(uint8_t port_id);
+
+/**
+ * Link up an Ethernet device administratively.
+ *
+ * The administrative device link up will re-enable the device rx/tx functionality
+ * after it is previously administrative device linked down.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - 0: Success, Ethernet device linked up administratively.
+ * - <0: Error code of the driver device link up function.
+ */
+extern int rte_eth_dev_admin_link_up(uint8_t port_id);
+
+/**
+ * Link down an Ethernet device administratively.
+ * The device rx/tx functionality will be disabled if success,
+ * and it can be re-enabled with a call to
+ * rte_eth_dev_admin_link_up()
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+extern int rte_eth_dev_admin_link_down(uint8_t port_id);
+
/**
* Close an Ethernet device. The device cannot be restarted!
*
--
1.9.0
More information about the dev
mailing list