[dpdk-dev] [RFC PATCH v2 03/28] eal/pci: Replace pci address comparison code by eal_compare_pci_addr

[Tetsuya Mukawa]

This patch replaces pci_addr_comparison() and memcmp() of pci addresses by
eal_compare_pci_addr().

Signed-off-by: Tetsuya Mukawa <mukawa at igel.co.jp>
---
 lib/librte_eal/bsdapp/eal/eal_pci.c       | 16 +---------------
 lib/librte_eal/common/eal_common_pci.c    |  2 +-
 lib/librte_eal/common/include/rte_pci.h   | 29 +++++++++++++++++++++++++++++
 lib/librte_eal/linuxapp/eal/eal_pci.c     | 16 +---------------
 lib/librte_eal/linuxapp/eal/eal_pci_uio.c |  2 +-
 5 files changed, 33 insertions(+), 32 deletions(-)

diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
index 54fcaf0..2576fa7 100644
--- a/lib/librte_eal/bsdapp/eal/eal_pci.c
+++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
@@ -270,20 +270,6 @@ pci_uio_map_resource(struct rte_pci_device *dev)
 	return (0);
 }
 
-/* Compare two PCI device addresses. */
-static int
-pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
-{
-	uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) + (addr->devid << 8) + addr->function;
-	uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) + (addr2->devid << 8) + addr2->function;
-
-	if (dev_addr > dev_addr2)
-		return 1;
-	else
-		return 0;
-}
-
-
 /* Scan one pci sysfs entry, and fill the devices list from it. */
 static int
 pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
@@ -358,7 +344,7 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
 		struct rte_pci_device *dev2 = NULL;
 
 		TAILQ_FOREACH(dev2, &pci_device_list, next) {
-			if (pci_addr_comparison(&dev->addr, &dev2->addr))
+			if (eal_compare_pci_addr(&dev->addr, &dev2->addr))
 				continue;
 			else {
 				TAILQ_INSERT_BEFORE(dev2, dev, next);
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index f3c7f71..f01f258 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -93,7 +93,7 @@ static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
 		if (devargs->type != RTE_DEVTYPE_BLACKLISTED_PCI &&
 			devargs->type != RTE_DEVTYPE_WHITELISTED_PCI)
 			continue;
-		if (!memcmp(&dev->addr, &devargs->pci.addr, sizeof(dev->addr)))
+		if (eal_compare_pci_addr(&dev->addr, &devargs->pci.addr))
 			return devargs;
 	}
 	return NULL;
diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
index b819539..fe374a8 100644
--- a/lib/librte_eal/common/include/rte_pci.h
+++ b/lib/librte_eal/common/include/rte_pci.h
@@ -261,6 +261,35 @@ eal_parse_pci_DomBDF(const char *input, struct rte_pci_addr *dev_addr)
 }
 #undef GET_PCIADDR_FIELD
 
+/* Compare two PCI device addresses. */
+/**
+ * Utility function to compare two PCI device addresses.
+ *
+ * @param addr
+ *	The PCI Bus-Device-Function address to compare
+ * @param addr2
+ *	The PCI Bus-Device-Function address to compare
+ * @return
+ *  0 on equal PCI address.
+ *  Positive on addr is greater than addr2.
+ *  Negative on addr is less than addr2.
+ */
+static inline int
+eal_compare_pci_addr(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
+{
+	uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) +
+					(addr->devid << 8) + addr->function;
+	uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) +
+					(addr2->devid << 8) + addr2->function;
+
+	if (dev_addr > dev_addr2)
+		return 1;
+	else if (dev_addr < dev_addr2)
+		return -1;
+	else
+		return 0;
+}
+
 /**
  * Probe the PCI bus for registered drivers.
  *
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index 5fe3961..862b93a 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -186,20 +186,6 @@ error:
 	return -1;
 }
 
-/* Compare two PCI device addresses. */
-static int
-pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
-{
-	uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) + (addr->devid << 8) + addr->function;
-	uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) + (addr2->devid << 8) + addr2->function;
-
-	if (dev_addr > dev_addr2)
-		return 1;
-	else
-		return 0;
-}
-
-
 /* Scan one pci sysfs entry, and fill the devices list from it. */
 static int
 pci_scan_one(const char *dirname, uint16_t domain, uint8_t bus,
@@ -292,7 +278,7 @@ pci_scan_one(const char *dirname, uint16_t domain, uint8_t bus,
 		struct rte_pci_device *dev2 = NULL;
 
 		TAILQ_FOREACH(dev2, &pci_device_list, next) {
-			if (pci_addr_comparison(&dev->addr, &dev2->addr))
+			if (eal_compare_pci_addr(&dev->addr, &dev2->addr) != 0)
 				continue;
 			else {
 				TAILQ_INSERT_BEFORE(dev2, dev, next);
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
index 7e62266..f0deeba 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
@@ -120,7 +120,7 @@ pci_uio_map_secondary(struct rte_pci_device *dev)
 	TAILQ_FOREACH(uio_res, pci_res_list, next) {
 
 		/* skip this element if it doesn't match our PCI address */
-		if (memcmp(&uio_res->pci_addr, &dev->addr, sizeof(dev->addr)))
+		if (eal_compare_pci_addr(&uio_res->pci_addr, &dev->addr))
 			continue;
 
 		for (i = 0; i != uio_res->nb_maps; i++) {
-- 
1.9.1