[dpdk-dev] [PATCH v3 6/6] DPDK changes for accommodating ENIC PMD

Neil Horman nhorman at tuxdriver.com
Mon Nov 24 18:19:42 CET 2014


On Mon, Nov 24, 2014 at 04:12:48PM +0000, Sujith Sankar (ssujith) wrote:
> 
> 
> On 24/11/14 5:03 pm, "Neil Horman" <nhorman at tuxdriver.com> wrote:
> 
> >On Mon, Nov 24, 2014 at 05:45:54AM +0000, Sujith Sankar (ssujith) wrote:
> >> 
> >> 
> >> On 24/11/14 5:47 am, "Neil Horman" <nhorman at tuxdriver.com> wrote:
> >> 
> >> >On Sun, Nov 23, 2014 at 09:38:19PM +0530, Sujith Sankar wrote:
> >> >> Signed-off-by: Sujith Sankar <ssujith at cisco.com>
> >> >> ---
> >> >>  config/common_linuxapp                             | 5 +++++
> >> >>  lib/Makefile                                       | 1 +
> >> >>  lib/librte_eal/linuxapp/eal/eal_pci_vfio.c         | 7 +++++++
> >> >>  lib/librte_eal/linuxapp/eal/include/eal_pci_init.h | 1 +
> >> >>  mk/rte.app.mk                                      | 4 ++++
> >> >>  5 files changed, 18 insertions(+)
> >> >> 
> >> >> diff --git a/config/common_linuxapp b/config/common_linuxapp
> >> >> index 57b61c9..3c091e7 100644
> >> >> --- a/config/common_linuxapp
> >> >> +++ b/config/common_linuxapp
> >> >> @@ -210,6 +210,11 @@ CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
> >> >>  CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
> >> >>  
> >> >>  #
> >> >> +# Compile burst-oriented Cisco ENIC PMD driver
> >> >> +#
> >> >> +CONFIG_RTE_LIBRTE_ENIC_PMD=y
> >> >> +
> >> >> +#
> >> >>  # Compile burst-oriented VIRTIO PMD driver
> >> >>  #
> >> >>  CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
> >> >> diff --git a/lib/Makefile b/lib/Makefile
> >> >> index e3237ff..1911790 100644
> >> >> --- a/lib/Makefile
> >> >> +++ b/lib/Makefile
> >> >> @@ -43,6 +43,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += librte_cmdline
> >> >>  DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ether
> >> >>  DIRS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += librte_pmd_e1000
> >> >>  DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += librte_pmd_ixgbe
> >> >> +DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += librte_pmd_enic
> >> >>  DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += librte_pmd_i40e
> >> >>  DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += librte_pmd_bond
> >> >>  DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += librte_pmd_ring
> >> >> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
> >> >>b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
> >> >> index c776ddc..6bf8f2e 100644
> >> >> --- a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
> >> >> +++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
> >> >> @@ -736,6 +736,7 @@ pci_vfio_map_resource(struct rte_pci_device *dev)
> >> >>  		maps[i].offset = reg.offset;
> >> >>  		maps[i].size = reg.size;
> >> >>  		dev->mem_resource[i].addr = bar_addr;
> >> >> +		dev->mem_resource[i].len = reg.size;
> >> >>  	}
> >> >>  
> >> >>  	/* if secondary process, do not set up interrupts */
> >> >> @@ -791,4 +792,10 @@ pci_vfio_is_enabled(void)
> >> >>  {
> >> >>  	return vfio_cfg.vfio_enabled;
> >> >>  }
> >> >> +
> >> >> +int
> >> >> +pci_vfio_container_fd(void)
> >> >> +{
> >> >> +	return vfio_cfg.vfio_container_fd;
> >> >> +}
> >> >You should move this function definition to a separate patch and put it
> >> >earlier
> >> >in the series, as you call this function two patches back.
> >> 
> >> Thanks for the comment, Neil.  I shall move this to a separate patch and
> >> put it earlier in the series.
> >> 
> >> >
> >> >Also, this gives me pause, as it seems like you're working around the
> >> >VFIO api.
> >> >From what I see, you just use this to get an fd that you can use in an
> >> >ioctl to
> >> >set some DMA settings.  First off, theres already a function called
> >> >pci_vfio_get_container_fd, which does exactly what you are doing here,
> >> >with
> >> >additional safety checking.
> >> >
> >> >However, even though there is an existing function to do what you
> >>want, I
> >> >would
> >> >recommend that you not use it for your purposes.  Whenever you expose
> >> >something
> >> >like a file descriptor, you run the risk of multiple accessors racing
> >> >trying to
> >> >set/unset features and preform operations.  It would be better if you
> >> >could add
> >> >apropriate api calls to vfio interface to set what you want.  That way
> >>the
> >> >library can add appropriate locking if/when needed
> >> 
> >> 
> >> I see that vfio_cfg.vfio_container_fd is obtained and stored in
> >> pci_vfio_enable(), and this is not modified later.
> >> ENIC PMD needs it to add the IOMMU mapping for buffers used for
> >> communicating with adapter firmware.  That¹s just adding an entry, and
> >> container fd is just passed as an argument.  So the following addition
> >>in
> >> eal_pci_vfio.c should be sufficient.  Since vfio_cfg is per process, I
> >>do
> >> not think that any other checking is required.
> >> 
> >> int
> >> pci_vfio_map_dma(struct vfio_iommu_type1_dma_map *dma_map)
> >> {
> >> 	return ioctl(vfio_cfg.vfio_container_fd, VFIO_IOMMU_MAP_DMA, dma_map);
> >> }
> >> 
> >> 
> >> 
> >> Does this look alright?  Do you think that I¹ve missed out anything
> >>here?
> >> 
> >It looks better yes, but I'm still confused as to why its necessecary.
> >Looking
> >back at your use of the fd, you're adding an iov entry for a buffer
> >allocated
> >via rte_memzone_reserve, which should come out of the dpdk's configured
> >memory.
> >In pci_vfio_setup_dma_maps, which is part of the pci probe path in eal
> >library,
> >all of the DPDK's physically available memory is already mapped into the
> >iommu
> >in a 1:1 fashion.  So why do you need to do this again?
> 
> Yes, ideally all the memory allocated using rte_memzone_reserve_aligned()
> should have its mapping already there in IOMMU.  The code that adds the
> mapping was not there initially, but while testing, I saw that it was
> giving DMAR errors (like what’s shown below).  Putting it back solved the
> problem.
> 
> 
> [295042.852620] DMAR:[fault reason 05] PTE Write access is not set
> [295044.406282] dmar: DRHD: handling fault status reg 602
> [295044.467981] dmar: DMAR:[DMA Write] Request device [86:00.0] fault addr
> 7fbd73b32000
> 
Ok, so what I hear you saying is that, now that that mapping code is available
in the pci probe path, you can remove your workaround correct?

Neil

> 
> Regards,
> -Sujith
> 
> >
> >Neil
> >
> 


More information about the dev mailing list