[dpdk-dev] Issues running Ethtool on KNI interfaces
Deshvanth Mirle Jayaprakash (dmirleja)
dmirleja at cisco.com
Mon Oct 13 09:39:27 CEST 2014
Thanks Helin, have been trying this for some time, Is there any other way
I can pass IOCTLs to IGB-UIO interfaces. Can I use /dev/uio0 and /dev/uio1
? Can I use IOCTLS on these references in Kernel to gather interface
statistics, set MTU or bring up/down UIO interfaces.
/Desh
On 10/13/14 12:34 AM, "Zhang, Helin" <helin.zhang at intel.com> wrote:
>Hi Desh
>
>You tried to use ethtool for KNI interfaces in VM, right? I don't think
>it is supported in VM.
>Currently it just supports ethtool for KNI interfaces in host for some
>igb and ixgbe NICs.
>
>Regards,
>Helin
>
>> -----Original Message-----
>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Deshvanth Mirle
>> Jayaprakash (dmirleja)
>> Sent: Monday, October 13, 2014 3:21 PM
>> To: dev at dpdk.org
>> Subject: [dpdk-dev] Issues running Ethtool on KNI interfaces
>>
>> Hi,
>>
>> Hypervisor: KVM
>>
>> VM: Linux OS with 2.6.32 Kernel
>>
>> VM Settings:
>>
>> 8 vCPUs, 8192 MB of memory, CPU Configuration: Copy Host CPU Config
>> (SandyBridge), Manually set CPU topology: Sockets=2, Cores=4, Threads=1
>>
>> 10Gigi Passthrough Interfaces attached to VM: Intel X520
>>
>>
>> DPDK settings:
>>
>>
>> DPDK Version: 1.6R2
>>
>>
>> echo 512 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
>>
>> rmmod ixgbe
>>
>> insmod igb_uio.ko
>>
>> mkdir /mnt/hugepages
>>
>> mount -t hugetlbfs nodev /mnt/hugepages
>>
>> #./igb_uio_bind.py --status
>>
>> #./igb_uio_bind.py --bind=igb_uio 03:01.0
>>
>> #./igb_uio_bind.py --bind=igb_uio 03:02.0
>>
>> #./igb_uio_bind.py --status
>>
>> modprobe hwmon
>>
>> insmod rte_kni.ko
>>
>> ./kni -c 0x1E -n 2 --socket-mem 512 -- -p 0x3
>>--config="(0,1,3),(1,2,4)" &
>>
>>
>> Having KNI process running in the background, creates two KNI interfaces
>> called vEth0 and vEth1 which corresponds to IGB-UIO interfaces attached
>>to
>> the Userspace. The issue is that the Ethtool doesn't work with KNI
>>interfaces.
>> Is there anything that I am missing, How can I get Ethtool to work with
>>KNI
>> interfaces? Also, If I do not use --socket-mem OR -m EAL option, KNI
>>application
>> consumes all the huge pages(It doesn't mater 512/4096) assigned in the
>>very
>> first step.Is that expected behavior? Can I get KNI to work without
>>assigning
>> any Hugepages?
>>
>>
>>
>> Also, I have attached screen shots of KNI log file. Please take a look.
>>
>>
>> Thanks,
>>
>> Desh
More information about the dev
mailing list