[dpdk-dev] [PATCH] ixgbe: allow unsupported SFP

[Thomas Monjalon]

No need to restrict usage of non Intel SFP.
If (hw->phy.type == ixgbe_phy_sfp_intel) is false,
a warning will be logged.
It was disabled for ixgbe and enabled but unused for i40e.

Signed-off-by: Thomas Monjalon <thomas.monjalon at 6wind.com>
---
 config/common_bsdapp                | 2 --
 config/common_linuxapp              | 2 --
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 2 --
 3 files changed, 6 deletions(-)

diff --git a/config/common_bsdapp b/config/common_bsdapp
index 645949f..eebd05b 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -167,7 +167,6 @@ CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
 CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP=n
 CONFIG_RTE_IXGBE_INC_VECTOR=n
 CONFIG_RTE_IXGBE_RX_OLFLAGS_DISABLE=n
 
@@ -182,7 +181,6 @@ CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_I40E_PF_DISABLE_STRIP_CRC=y
 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=n
-CONFIG_RTE_LIBRTE_I40E_ALLOW_UNSUPPORTED_SFP=y
 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
 # interval up to 8160 us, aligned to 2 (or default value)
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 5bee910..4713eb4 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -190,7 +190,6 @@ CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
 CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP=n
 CONFIG_RTE_IXGBE_INC_VECTOR=y
 CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
 
@@ -205,7 +204,6 @@ CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_I40E_PF_DISABLE_STRIP_CRC=n
 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_I40E_ALLOW_UNSUPPORTED_SFP=n
 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
 # interval up to 8160 us, aligned to 2 (or default value)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index f4b590b..a147d46 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -727,9 +727,7 @@ eth_ixgbe_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
 	hw->device_id = pci_dev->id.device_id;
 	hw->vendor_id = pci_dev->id.vendor_id;
 	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
-#ifdef RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP
 	hw->allow_unsupported_sfp = 1;
-#endif
 
 	/* Initialize the shared code (base driver) */
 #ifdef RTE_NIC_BYPASS
-- 
2.0.4