[dpdk-dev] [PATCH v2] distributor_app: new sample app

Ananyev, Konstantin konstantin.ananyev at intel.com
Mon Sep 29 15:06:57 CEST 2014



> -----Original Message-----
> From: Pattan, Reshma
> Sent: Monday, September 29, 2014 1:40 PM
> To: Ananyev, Konstantin; De Lara Guarch, Pablo; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> 
> 
> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Friday, September 26, 2014 4:52 PM
> To: De Lara Guarch, Pablo; Pattan, Reshma; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> 
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of De Lara Guarch,
> > Pablo
> > Sent: Friday, September 26, 2014 4:12 PM
> > To: Pattan, Reshma; dev at dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> > Hi,
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of reshmapa
> > > Sent: Wednesday, September 24, 2014 3:17 PM
> > > To: dev at dpdk.org
> > > Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > >
> > > From: Reshma Pattan <reshma.pattan at intel.com>
> > >
> > > A new sample app that shows the usage of the distributor library.
> > > This app works as follows:
> > >
> > > * An RX thread runs which pulls packets from each ethernet port in turn
> > >   and passes those packets to worker using a distributor component.
> > > * The workers take the packets in turn, and determine the output port
> > >   for those packets using basic l2forwarding doing an xor on the source
> > >   port id.
> > > * The RX thread takes the returned packets from the workers and enqueue
> > >   those packets into an rte_ring structure.
> > > * A TX thread pulls the packets off the rte_ring structure and then
> > >   sends each packet out the output port specified previously by the
> > > worker
> > > * Command-line option support provided only for portmask.
> > >
> > > Signed-off-by: Bruce Richardson <bruce.richardson at intel.com>
> > > Signed-off-by: Reshma Pattan <reshma.pattan at intel.com>
> > > ---
> > >  examples/Makefile                 |   1 +
> > >  examples/distributor_app/Makefile |  57 ++++
> > >  examples/distributor_app/main.c   | 585
> > > ++++++++++++++++++++++++++++++++++++++
> > >  examples/distributor_app/main.h   |  46 +++
> > >  4 files changed, 689 insertions(+)
> > >  create mode 100644 examples/distributor_app/Makefile  create mode
> > > 100644 examples/distributor_app/main.c  create mode 100644
> > > examples/distributor_app/main.h
> > >
> > > diff --git a/examples/Makefile b/examples/Makefile index
> > > 6245f83..2ba82b0 100644
> > > --- a/examples/Makefile
> > > +++ b/examples/Makefile
> > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y += vmdq
> > > DIRS-y += vmdq_dcb
> > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > >
> > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > a/examples/distributor_app/Makefile
> > > b/examples/distributor_app/Makefile
> > > new file mode 100644
> > > index 0000000..394785d
> > > --- /dev/null
> > > +++ b/examples/distributor_app/Makefile
> > > @@ -0,0 +1,57 @@
> > > +#   BSD LICENSE
> > > +#
> > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > +#   All rights reserved.
> > > +#
> > > +#   Redistribution and use in source and binary forms, with or without
> > > +#   modification, are permitted provided that the following conditions
> > > +#   are met:
> > > +#
> > > +#     * Redistributions of source code must retain the above copyright
> > > +#       notice, this list of conditions and the following disclaimer.
> > > +#     * Redistributions in binary form must reproduce the above copyright
> > > +#       notice, this list of conditions and the following disclaimer in
> > > +#       the documentation and/or other materials provided with the
> > > +#       distribution.
> > > +#     * Neither the name of Intel Corporation nor the names of its
> > > +#       contributors may be used to endorse or promote products derived
> > > +#       from this software without specific prior written permission.
> > > +#
> > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > > NOT
> > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > > OF USE,
> > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > AND ON ANY
> > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > TORT
> > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > > THE USE
> > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > +
> > > +ifeq ($(RTE_SDK),)
> > > +$(error "Please define RTE_SDK environment variable") endif
> > > +
> > > +# Default target, can be overriden by command line or environment
> > > +RTE_TARGET ?= x86_64-default-linuxapp-gcc
> >
> > This target is not present anymore. Change it to x86_64-native-linuxapp-gcc.
> >
> > > +
> > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > +
> > > +# binary name
> > > +APP = distributor_app
> > > +
> > > +# all source are stored in SRCS-y
> > > +SRCS-y := main.c
> > > +
> > > +CFLAGS += $(WERROR_FLAGS)
> > > +
> > > +# workaround for a gcc bug with noreturn attribute #
> > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > +-Wno-return-type endif
> > > +
> > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > +
> > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > diff --git a/examples/distributor_app/main.c
> > > b/examples/distributor_app/main.c new file mode 100644 index
> > > 0000000..628810a
> > > --- /dev/null
> > > +++ b/examples/distributor_app/main.c
> > > @@ -0,0 +1,585 @@
> > > +/*-
> > > + *   BSD LICENSE
> > > + *
> > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > + *   All rights reserved.
> > > + *
> > > + *   Redistribution and use in source and binary forms, with or without
> > > + *   modification, are permitted provided that the following conditions
> > > + *   are met:
> > > + *
> > > + *     * Redistributions of source code must retain the above copyright
> > > + *       notice, this list of conditions and the following disclaimer.
> > > + *     * Redistributions in binary form must reproduce the above copyright
> > > + *       notice, this list of conditions and the following disclaimer in
> > > + *       the documentation and/or other materials provided with the
> > > + *       distribution.
> > > + *     * Neither the name of Intel Corporation nor the names of its
> > > + *       contributors may be used to endorse or promote products derived
> > > + *       from this software without specific prior written permission.
> > > + *
> > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > > NOT
> > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > > OF USE,
> > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > AND ON ANY
> > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > TORT
> > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > > THE USE
> > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > + */
> > > +
> > > +#include <stdint.h>
> > > +#include <inttypes.h>
> > > +#include <unistd.h>
> > > +#include <signal.h>
> > > +#include <getopt.h>
> > > +
> > > +#include <rte_eal.h>
> > > +#include <rte_ethdev.h>
> > > +#include <rte_cycles.h>
> > > +#include <rte_malloc.h>
> > > +#include <rte_debug.h>
> > > +#include <rte_distributor.h>
> > > +
> > > +#include "main.h"
> > > +
> > > +#define RX_RING_SIZE 256
> > > +#define RX_FREE_THRESH 32
> > > +#define RX_PTHRESH 8
> > > +#define RX_HTHRESH 8
> > > +#define RX_WTHRESH 0
> > > +
> > > +#define TX_RING_SIZE 512
> > > +#define TX_FREE_THRESH 32
> > > +#define TX_PTHRESH 32
> > > +#define TX_HTHRESH 0
> > > +#define TX_WTHRESH 0
> > > +#define TX_RSBIT_THRESH 32
> > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> > > \
> > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > +
> > > +#define NUM_MBUFS ((64*1024)-1)
> > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > > RTE_PKTMBUF_HEADROOM)
> > > +#define MBUF_CACHE_SIZE 250
> > > +#define BURST_SIZE 32
> > > +#define RTE_RING_SZ 1024
> > > +
> > > +/* mask of enabled ports */
> > > +static uint32_t enabled_port_mask = 0;
> > > +
> > > +static volatile struct app_stats {
> > > +	struct {
> > > +		uint64_t rx_pkts;
> > > +		uint64_t returned_pkts;
> > > +		uint64_t enqueued_pkts;
> > > +	} rx __rte_cache_aligned;
> > > +
> > > +	struct {
> > > +		uint64_t dequeue_pkts;
> > > +		uint64_t tx_pkts;
> > > +	} tx __rte_cache_aligned;
> > > +} app_stats;
> > > +
> > > +static const struct rte_eth_conf port_conf_default = {
> > > +	.rxmode = {
> > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > +		.split_hdr_size = 0,
> > > +		.header_split   = 0, /**< Header Split disabled */
> > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > +	},
> > > +	.txmode = {
> > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > +	},
> > > +	.lpbk_mode = 0,
> > > +	.rx_adv_conf = {
> > > +			.rss_conf = {
> > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > +					ETH_RSS_IPV4_TCP |
> > > ETH_RSS_IPV4_UDP |
> > > +					ETH_RSS_IPV6_TCP |
> > > ETH_RSS_IPV6_UDP,
> > > +			}
> > > +	},
> > > +};
> > > +
> > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > +	.rx_thresh = {
> > > +		.pthresh = RX_PTHRESH,
> > > +		.hthresh = RX_HTHRESH,
> > > +		.wthresh = RX_WTHRESH,
> > > +	},
> > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > +	.rx_drop_en = 0,
> > > +};
> > > +
> > > +static const struct rte_eth_txconf tx_conf_default = {
> > > +	.tx_thresh = {
> > > +		.pthresh = TX_PTHRESH,
> > > +		.hthresh = TX_HTHRESH,
> > > +		.wthresh = TX_WTHRESH,
> > > +	},
> > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > +	.txq_flags = TX_Q_FLAGS
> > > +
> > > +};
> > > +
> > > +struct output_buffer {
> > > +	unsigned count;
> > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > +
> > > +/*
> > > + * Initialises a given port using global settings and with the rx
> > > +buffers
> > > + * coming from the mbuf_pool passed as parameter  */ static inline
> > > +int port_init(uint8_t port, struct rte_mempool *mbuf_pool) {
> > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > +	int retval;
> > > +	uint16_t q;
> > > +
> > > +	if (port >= rte_eth_dev_count())
> > > +		return -1;
> > > +
> > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > +	if (retval != 0)
> > > +		return retval;
> > > +
> > > +	for (q = 0; q < rxRings; q++) {
> > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > +
> > > 	rte_eth_dev_socket_id(port),
> > > +						&rx_conf_default,
> > > mbuf_pool);
> > > +		if (retval < 0)
> > > +			return retval;
> > > +	}
> > > +
> > > +	for (q = 0; q < txRings; q++) {
> > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > +
> > > 	rte_eth_dev_socket_id(port),
> > > +						&tx_conf_default);
> > > +		if (retval < 0)
> > > +			return retval;
> > > +	}
> > > +
> > > +	retval  = rte_eth_dev_start(port);
> > > +	if (retval < 0)
> > > +		return retval;
> > > +
> > > +	struct rte_eth_link link;
> > > +	rte_eth_link_get_nowait(port, &link);
> > > +	if (!link.link_status) {
> > > +		sleep(1);
> > > +		rte_eth_link_get_nowait(port, &link);
> > > +	}
> > > +
> > > +	if (!link.link_status) {
> > > +		printf("Link down on port %"PRIu8"\n", port);
> > > +		return 0;
> > > +	}
> > > +
> > > +	struct ether_addr addr;
> > > +	rte_eth_macaddr_get(port, &addr);
> > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > +			(unsigned)port,
> > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > +
> > > +	rte_eth_promiscuous_enable(port);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +struct lcore_params {
> > > +	unsigned worker_id;
> > > +	struct rte_distributor *d;
> > > +	struct rte_ring *r;
> > > +};
> > > +
> > > +static __attribute__((noreturn)) void lcore_rx(struct lcore_params
> > > +*p) {
> > > +	struct rte_distributor *d = p->d;
> > > +	struct rte_ring *r = p->r;
> > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > +	const int socket_id = rte_socket_id();
> > > +	uint8_t port;
> > > +
> > > +	for (port = 0; port < nb_ports; port++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > +			continue;
> > > +
> > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > +			printf("WARNING, port %u is on remote NUMA node
> > > to "
> > > +					"RX thread.\n\tPerformance will not
> > > "
> > > +					"be optimal.\n", port);
> > > +	}
> > > +
> > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > +	port = 0;
> > > +	for (;;) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > +			if (++port == nb_ports)
> > > +				port = 0;
> > > +			continue;
> > > +		}
> > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > +				BURST_SIZE);
> > > +		app_stats.rx.rx_pkts += nb_rx;
> > > +
> > > +		rte_distributor_process(d, bufs, nb_rx);
> > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > +				bufs, BURST_SIZE*2);
> > > +		app_stats.rx.returned_pkts += nb_ret;
> > > +		if (unlikely(nb_ret == 0))
> > > +			continue;
> > > +
> > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> > > nb_ret);
> > > +		app_stats.rx.enqueued_pkts += sent;
> > > +		if (unlikely(sent < nb_ret)) {
> > > +			printf("Packet loss due to full ring\n");
> >
> > I would remove this printf. If core is too busy to process packets, this may make performance worse.
> > Statistics should reflect this packet loss.
> 
> >Probably use RTE_LOG(DEBUG, ...).
> >That's way you can switch it on/off at compile time.
> 
> By default  LOG_LEVEL is 8 in config/common_linuxapp, hence I see RTE_LOG(DEBUG,...) always works.
> So until unless change the LOG-LEVEL to lesser value, RTE_LOG(DEBUG,..) will be logged ..
> Please let me know if I can go ahead and remove the printf as of now until the LOG_LEVEL is fixed. (or) I have to add some logic to log
> RTE_LOG(DEBUG,..)  only once.

Sorry, I probably wasn't clear enough.
What I am saying -  create something like that inside your app code:

#ifdef XXX_DEBUG
#define XXX_LOG(level, fmt, args...) \
        RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
#else
#define XXX_LOG(level, fmt, args...) do { } while(0)
#endif

And replace your pritnf()s with it.

> 
> >
> > > +			while (sent < nb_ret)
> > > +				rte_pktmbuf_free(bufs[sent++]);
> > > +		}
> > > +		if (++port == nb_ports)
> > > +			port = 0;
> > > +	}
> > > +}
> > > +
> > > +static inline void
> > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > +			outbuf->count);
> > > +	app_stats.tx.tx_pkts += nb_tx;
> > > +
> > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > +		printf("Packet loss with tx_burst\n");
> >
> > Same here. This is fine for debugging, but statistics are updated as well, so we do not need this printf.
> >
> > > +		do {
> > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > +		} while (++nb_tx < outbuf->count);
> > > +	}
> > > +	outbuf->count = 0;
> > > +}
> > > +
> > > +static inline void
> > > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
> > > +{
> > > +	uint8_t outp;
> > > +	for (outp = 0; outp < nb_ports; outp++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > > +			continue;
> > > +
> > > +		if (tx_buffers[outp].count == 0)
> > > +			continue;
> > > +
> > > +		flush_one_port(&tx_buffers[outp], outp);
> > > +	}
> > > +}
> > > +
> > > +static __attribute__((noreturn)) void lcore_tx(struct rte_ring
> > > +*in_r) {
> > > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > +	const int socket_id = rte_socket_id();
> > > +	uint8_t port;
> > > +
> > > +	for (port = 0; port < nb_ports; port++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > +			continue;
> > > +
> > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > +			printf("WARNING, port %u is on remote NUMA node
> > > to "
> > > +					"TX thread.\n\tPerformance will not "
> > > +					"be optimal.\n", port);
> > > +	}
> > > +
> > > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > > +	for (;;) {
> > > +		for (port = 0; port < nb_ports; port++) {
> > > +			/* skip ports that are not enabled */
> > > +			if ((enabled_port_mask & (1 << port)) == 0)
> > > +				continue;
> > > +
> > > +			struct rte_mbuf *bufs[BURST_SIZE];
> > > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > > +					(void *)bufs, BURST_SIZE);
> > > +			app_stats.tx.dequeue_pkts += nb_rx;
> > > +
> > > +			/* if we get no traffic, flush anything we have */
> > > +			if (unlikely(nb_rx == 0)) {
> > > +				flush_all_ports(tx_buffers, nb_ports);
> > > +				continue;
> > > +			}
> > > +
> > > +			/* for traffic we receive, queue it up for transmit */
> > > +			uint16_t i;
> > > +			_mm_prefetch(bufs[0], 0);
> > > +			_mm_prefetch(bufs[1], 0);
> > > +			_mm_prefetch(bufs[2], 0);
> > > +			for (i = 0; i < nb_rx; i++) {
> > > +				struct output_buffer *outbuf;
> > > +				uint8_t outp;
> > > +				_mm_prefetch(bufs[i + 3], 0);
> > > +				/* workers should update in_port to hold the
> > > +				 * output port value */
> > > +				outp = bufs[i]->port;
> > > +				/* skip ports that are not enabled */
> > > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > > +					continue;
> > > +
> > > +				outbuf = &tx_buffers[outp];
> > > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > > +				if (outbuf->count == BURST_SIZE)
> > > +					flush_one_port(outbuf, outp);
> > > +			}
> > > +		}
> > > +	}
> > > +}
> > > +
> > > +
> > > +static __attribute__((noreturn)) void lcore_worker(struct
> > > +lcore_params *p) {
> > > +	struct rte_distributor *d = p->d;
> > > +	const unsigned id = p->worker_id;
> > > +	/* for single port, xor_val will be zero so we won't modify the output
> > > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > > +	 */
> > > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > > +	struct rte_mbuf *buf = NULL;
> > > +
> > > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > > +	for (;;) {
> > > +		buf = rte_distributor_get_pkt(d, id, buf);
> > > +		buf->port ^= xor_val;
> > > +	}
> > > +}
> > > +
> > > +static void
> > > +int_handler(int sig_num)
> > > +{
> > > +	struct rte_eth_stats eth_stats;
> > > +	unsigned i;
> > > +
> > > +	printf("Exiting on signal %d\n", sig_num);
> > > +
> > > +	printf("\nRX thread stats:\n");
> > > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > > +
> > > +	printf("\nTX thread stats:\n");
> > > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > > +
> > > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > > +		rte_eth_stats_get(i, &eth_stats);
> > > +		printf("\nPort %u stats:\n", i);
> > > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > > +	}
> > > +	exit(0);
> > > +}
> > > +
> > > +/* display usage */
> > > +static void
> > > +print_usage(const char *prgname)
> > > +{
> > > +	printf("%s [EAL options] -- -p PORTMASK\n"
> > > +			"  -p PORTMASK: hexadecimal bitmask of ports to
> > > configure\n",
> > > +			prgname);
> > > +}
> > > +
> > > +static int
> > > +parse_portmask(const char *portmask) {
> > > +	char *end = NULL;
> > > +	unsigned long pm;
> > > +
> > > +	/* parse hexadecimal string */
> > > +	pm = strtoul(portmask, &end, 16);
> > > +	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
> > > +		return -1;
> > > +
> > > +	if (pm == 0)
> > > +		return -1;
> > > +
> > > +	return pm;
> > > +}
> > > +
> > > +/* Parse the argument given in the command line of the application
> > > +*/ static int parse_args(int argc, char **argv) {
> > > +	int opt;
> > > +	char **argvopt;
> > > +	int option_index;
> > > +	char *prgname = argv[0];
> > > +	static struct option lgopts[] = {
> > > +		{NULL, 0, 0, 0}
> > > +	};
> > > +
> > > +	argvopt = argv;
> > > +
> > > +	while ((opt = getopt_long(argc, argvopt, "p:",
> > > +			lgopts, &option_index)) != EOF) {
> > > +
> > > +		switch (opt) {
> > > +			/* portmask */
> > > +			case 'p':
> > > +				enabled_port_mask =
> > > parse_portmask(optarg);
> > > +				if (enabled_port_mask == 0) {
> > > +					printf("invalid portmask\n");
> > > +					print_usage(prgname);
> > > +					return -1;
> > > +				}
> > > +				break;
> > > +
> > > +			default:
> > > +				print_usage(prgname);
> > > +				return -1;
> > > +		}
> > > +	}
> > > +
> > > +if (optind <= 1) {
> > > +	print_usage(prgname);
> > > +	return -1;
> > > +}
> > > +
> > > +	argv[optind-1] = prgname;
> > > +
> > > +	optind = 0; /* reset getopt lib */
> > > +	return 0;
> > > +}
> > > +
> > > +/* Main function, does initialization and calls the per-lcore
> > > +functions */ int MAIN(int argc, char *argv[]) {
> > > +	struct rte_mempool *mbuf_pool;
> > > +	struct rte_distributor *d;
> > > +	struct rte_ring *output_ring;
> > > +	unsigned lcore_id, worker_id = 0;
> > > +	unsigned nb_ports;
> > > +	uint8_t portid;
> > > +	uint8_t nb_ports_available;
> > > +
> > > +	/* catch ctrl-c so we can print on exit */
> > > +	signal(SIGINT, int_handler);
> > > +
> > > +	/* init EAL */
> > > +	int ret = rte_eal_init(argc, argv);
> > > +	if (ret < 0)
> > > +		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
> > > +	argc -= ret;
> > > +	argv += ret;
> > > +
> > > +	/* parse application arguments (after the EAL ones) */
> > > +	ret = parse_args(argc, argv);
> > > +	if (ret < 0)
> > > +		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
> > > +
> > > +	if (rte_lcore_count() < 3)
> > > +		rte_exit(EXIT_FAILURE, "Error, This application needs at "
> > > +				"least 3 logical cores to run:\n"
> > > +				"1 lcore for packet RX and distribution\n"
> > > +				"1 lcore for packet TX\n"
> > > +				"and at least 1 lcore for worker threads\n");
> > > +
> > > +	if (rte_eal_pci_probe() != 0)
> > > +		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
> > > +
> > > +	nb_ports = rte_eth_dev_count();
> > > +	if (nb_ports == 0)
> > > +		rte_exit(EXIT_FAILURE, "Error: no ethernet ports
> > > detected\n");
> > > +	if (nb_ports != 1 && (nb_ports & 1))
> > > +		rte_exit(EXIT_FAILURE, "Error: number of ports must be
> > > even, except "
> > > +				"when using a single port\n");
> > > +
> > > +	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS *
> > > nb_ports,
> > > +			MBUF_SIZE, MBUF_CACHE_SIZE,
> > > +			sizeof(struct rte_pktmbuf_pool_private),
> > > +			rte_pktmbuf_pool_init, NULL,
> > > +			rte_pktmbuf_init, NULL,
> > > +			rte_socket_id(), 0);
> > > +	if (mbuf_pool == NULL)
> > > +		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
> > > +
> > > +	nb_ports_available = nb_ports;
> > > +
> > > +	/* initialize all ports */
> > > +	for (portid = 0; portid < nb_ports; portid++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << portid)) == 0) {
> > > +			printf("\nSkipping disabled port %d\n", portid);
> > > +			nb_ports_available--;
> > > +			continue;
> > > +		}
> > > +		/* init port */
> > > +		printf("Initializing port %u... done\n", (unsigned) portid);
> > > +
> > > +		if (port_init(portid, mbuf_pool) != 0)
> > > +			rte_exit(EXIT_FAILURE, "Cannot initialize port
> > > %"PRIu8"\n",
> > > +					portid);
> > > +	}
> > > +
> > > +	if (!nb_ports_available) {
> > > +		rte_exit(EXIT_FAILURE,
> > > +				"All available ports are disabled. Please set
> > > portmask.\n");
> > > +	}
> > > +
> > > +	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
> > > +			rte_lcore_count() - 2);
> > > +	if (d == NULL)
> > > +		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
> > > +
> > > +	/* scheduler ring is read only by the transmitter core, but written to
> > > +	 * by multiple threads
> > > +	 */
> > > +	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
> > > +			rte_socket_id(), RING_F_SC_DEQ);
> > > +	if (output_ring == NULL)
> > > +		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
> > > +
> > > +	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
> > > +		if (worker_id == rte_lcore_count() - 2)
> > > +			rte_eal_remote_launch((lcore_function_t
> > > *)lcore_tx,
> > > +					output_ring, lcore_id);
> > > +		else {
> > > +			struct lcore_params *p =
> > > +					rte_malloc(NULL, sizeof(*p), 0);
> > > +			if (!p)
> > > +				rte_panic("malloc failure\n");
> > > +			*p = (struct lcore_params){worker_id, d,
> > > output_ring};
> > > +			rte_eal_remote_launch((lcore_function_t
> > > *)lcore_worker,
> > > +					p, lcore_id);
> > > +		}
> > > +		worker_id++;
> > > +	}
> > > +	/* call lcore_main on master core only */
> > > +	struct lcore_params p = { 0, d, output_ring };
> > > +	lcore_rx(&p);
> > > +	return 0;
> > > +}
> > > diff --git a/examples/distributor_app/main.h
> > > b/examples/distributor_app/main.h new file mode 100644 index
> > > 0000000..2682d15
> > > --- /dev/null
> > > +++ b/examples/distributor_app/main.h
> > > @@ -0,0 +1,46 @@
> > > +/*-
> > > + *   BSD LICENSE
> > > + *
> > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > + *   All rights reserved.
> > > + *
> > > + *   Redistribution and use in source and binary forms, with or without
> > > + *   modification, are permitted provided that the following conditions
> > > + *   are met:
> > > + *
> > > + *     * Redistributions of source code must retain the above copyright
> > > + *       notice, this list of conditions and the following disclaimer.
> > > + *     * Redistributions in binary form must reproduce the above copyright
> > > + *       notice, this list of conditions and the following disclaimer in
> > > + *       the documentation and/or other materials provided with the
> > > + *       distribution.
> > > + *     * Neither the name of Intel Corporation nor the names of its
> > > + *       contributors may be used to endorse or promote products derived
> > > + *       from this software without specific prior written permission.
> > > + *
> > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > > NOT
> > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > > OF USE,
> > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > AND ON ANY
> > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > TORT
> > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > > THE USE
> > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > + */
> > > +
> > > +#ifndef _MAIN_H_
> > > +#define _MAIN_H_
> > > +
> > > +
> > > +#ifdef RTE_EXEC_ENV_BAREMETAL
> > > +#define MAIN _main
> > > +#else
> > > +#define MAIN main
> > > +#endif
> > > +
> > > +int MAIN(int argc, char *argv[]);
> > > +
> > > +#endif /* ifndef _MAIN_H_ */
> > > --
> > > 1.9.3



More information about the dev mailing list