[dpdk-dev] [PATCH] kni: fix igb and ixgbe kni ethtool get_link op

[Shelton Chia]

igb and ixgbe's link detected always return yes, fix get_link func
refer to get_settings, it works correctly for my i350 and 82599es nic.

Signed-off-by: Shelton Chia <jiaxt at sinogrid.com>
---
 .../linuxapp/kni/ethtool/igb/igb_ethtool.c         | 18 ++++++---------
 .../linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c     | 26 +++++++++++++++++++++-
 2 files changed, 32 insertions(+), 12 deletions(-)

diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
index f3c48b2..5457f48 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
@@ -383,19 +383,15 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 static u32 igb_get_link(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	struct e1000_mac_info *mac = &adapter->hw.mac;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 status;
 
-	/*
-	 * If the link is not reported up to netdev, interrupts are disabled,
-	 * and so the physical link state may have changed since we last
-	 * looked. Set get_link_status to make sure that the true link
-	 * state is interrogated, rather than pulling a cached and possibly
-	 * stale link state from the driver.
-	 */
-	if (!netif_carrier_ok(netdev))
-		mac->get_link_status = 1;
+	status = E1000_READ_REG(hw, E1000_STATUS);
 
-	return igb_has_link(adapter);
+	if (status & E1000_STATUS_LU) 
+		return 1;
+	else
+		return 0;
 }
 
 static void igb_get_pauseparam(struct net_device *netdev,
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
index 11472bd..184b14f 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
+++ b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
@@ -801,6 +801,30 @@ static void ixgbe_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
 	regs_buff[1128] = IXGBE_READ_REG(hw, IXGBE_MFLCN);
 }
 
+static u32 ixgbe_get_link(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 link_speed = 0;
+	bool link_up;
+
+	if (!in_interrupt()) {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	} else {
+		/*
+		 * this case is a special workaround for RHEL5 bonding
+		 * that calls this routine from interrupt context
+		 */
+		link_speed = adapter->link_speed;
+		link_up = adapter->link_up;
+	}
+
+	if (link_up) 
+		return 1;
+	else 
+		return 0;
+}
+
 static int ixgbe_get_eeprom_len(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
@@ -2838,7 +2862,7 @@ struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_wol		= ixgbe_get_wol,
 	.set_wol		= ixgbe_set_wol,
 	.nway_reset		= ixgbe_nway_reset,
-	.get_link		= ethtool_op_get_link,
+	.get_link		= ixgbe_get_link,
 	.get_eeprom_len		= ixgbe_get_eeprom_len,
 	.get_eeprom		= ixgbe_get_eeprom,
 	.set_eeprom		= ixgbe_set_eeprom,
-- 
2.3.5