[dpdk-dev] [PATCH v2 24/33] i40e/base: get pf_id from HW rather than PCI function
Helin Zhang
helin.zhang at intel.com
Thu Apr 30 17:03:30 CEST 2015
Getting the pf_id from the function number was a good place to
start, but when the PF was setup in pass-thru mode, the PCI
bus/device/function was virtualized and the number in the VM is
different from the number in the bare metal. This caused HW
configuration issues when the wrong pf_id was used to set up the
HMC and other structures. The PF_FUNC_RID register has the real
bus/device/function information as configured by the BIOS, so use
that for a better number.
Signed-off-by: Helin Zhang <helin.zhang at intel.com>
---
lib/librte_pmd_i40e/i40e/i40e_common.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/lib/librte_pmd_i40e/i40e/i40e_common.c b/lib/librte_pmd_i40e/i40e/i40e_common.c
index 705b9dd..03980b9 100644
--- a/lib/librte_pmd_i40e/i40e/i40e_common.c
+++ b/lib/librte_pmd_i40e/i40e/i40e_common.c
@@ -592,7 +592,7 @@ enum i40e_status_code i40e_validate_mac_addr(u8 *mac_addr)
enum i40e_status_code i40e_init_shared_code(struct i40e_hw *hw)
{
enum i40e_status_code status = I40E_SUCCESS;
- u32 reg;
+ u32 port, ari, func_rid;
DEBUGFUNC("i40e_init_shared_code");
@@ -607,18 +607,17 @@ enum i40e_status_code i40e_init_shared_code(struct i40e_hw *hw)
hw->phy.get_link_info = true;
- /* Determine port number */
- reg = rd32(hw, I40E_PFGEN_PORTNUM);
- reg = ((reg & I40E_PFGEN_PORTNUM_PORT_NUM_MASK) >>
- I40E_PFGEN_PORTNUM_PORT_NUM_SHIFT);
- hw->port = (u8)reg;
-
- /* Determine the PF number based on the PCI fn */
- reg = rd32(hw, I40E_GLPCI_CAPSUP);
- if (reg & I40E_GLPCI_CAPSUP_ARI_EN_MASK)
- hw->pf_id = (u8)((hw->bus.device << 3) | hw->bus.func);
+ /* Determine port number and PF number*/
+ port = (rd32(hw, I40E_PFGEN_PORTNUM) & I40E_PFGEN_PORTNUM_PORT_NUM_MASK)
+ >> I40E_PFGEN_PORTNUM_PORT_NUM_SHIFT;
+ hw->port = (u8)port;
+ ari = (rd32(hw, I40E_GLPCI_CAPSUP) & I40E_GLPCI_CAPSUP_ARI_EN_MASK) >>
+ I40E_GLPCI_CAPSUP_ARI_EN_SHIFT;
+ func_rid = rd32(hw, I40E_PF_FUNC_RID);
+ if (ari)
+ hw->pf_id = (u8)(func_rid & 0xff);
else
- hw->pf_id = (u8)hw->bus.func;
+ hw->pf_id = (u8)(func_rid & 0x7);
status = i40e_init_nvm(hw);
return status;
--
1.8.1.4
More information about the dev
mailing list