[dpdk-dev] Performance issues with Mellanox Connectx-3 EN
giladb at mellanox.com
Thu Aug 13 13:13:00 CEST 2015
Following Qian answer - 2Mpps is VERY (VERY) low and far below what we see even with single core.
Which version of DPDK and PMD are you using? Are you using MLNX optimized libs for PMD? Can you provide more details on the exact setup?
Can you run a simple test with testpmd and see if you are getting the same results?
Just to be clear - it does not matter which version you are using, 2Mpps is very far from what you should get :)
From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Xu, Qian Q
Sent: Thursday, August 13, 2015 6:25 AM
To: Xiaozhou Li <xl at CS.Princeton.EDU>; dev at dpdk.org
Subject: Re: [dpdk-dev] Performance issues with Mellanox Connectx-3 EN
So seems the performance bottleneck is not at the core, have you checked that the Mellanox NIC's configuration? How many queues per port are you using? Could you try l3fwd example with Mellanox to check if the performance is good enough? I'm not familiar with Mellanox NIC, but if you have tried Intel Fortville 40G NIC, I can give more suggestions about the NIC's configurations.
From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Xiaozhou Li
Sent: Thursday, August 13, 2015 7:20 AM
To: dev at dpdk.org
Subject: [dpdk-dev] Performance issues with Mellanox Connectx-3 EN
I am getting performance scalability issues with DPDK on Mellanox Connectx-3 .
Each of our machine has 16 cores and a single-port 40G Mellanox Connectx-3 EN. We find out the server throughput *does not scale* with number of cores. With a single thread on one core, we can get about 2 Mpps with a simple echo server implementation. However, the performance number does not increase as we use more cores. Our implementation is based on the l2fwd example.
I'd greatly appreciate it if anyone could provide some insights on what might be the problem and how can we improve the performance with Mellanox Connectx-3 EN. Thanks!
More information about the dev