[dpdk-dev] [PATCH 6/6] virtio: arm/arm64: memory mapped IO support in pmd driver
Santosh Shukla
sshukla at mvista.com
Fri Dec 4 18:35:19 CET 2015
This patch set add memory-mapped-IO support for arm/arm64 archs in virtio-pmd
driver. Patch creates ioport-mem device name /dev/igb_ioport. virtio_ethdev_init
function to open that device file for once, mappes 4K page_size memory such that
all entry in cat /proc/ioport {all PCI_IOBAR entry} mapped for once. For that
two ancessor api;s
- virtio_map_ioport : Maps all cat /proc/ioport pci iobars.
- virtio_set_ioport_addr : manages the each pci_iobar slot as an offset.
Tested for thunderX/arm64 platform, by creating maximum guest kernel supported
virtio-net-pci device i.e.. 31 max, then attaching all 32 interface to uio,
Verified with tespmd io_fwd application.
Signed-off-by: Santosh Shukla <sshukla at mvista.com>
Signed-off-by: Rizwan Ansari <ransari at mvista.com>
---
drivers/net/virtio/virtio_ethdev.c | 138 ++++++++++++++++++++++++++++-
lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 80 ++++++++++++++++-
2 files changed, 214 insertions(+), 4 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 74c00ee..93b8784 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -63,6 +63,30 @@
#include "virtqueue.h"
#include "virtio_rxtx.h"
+#ifdef RTE_EXEC_ENV_LINUXAPP
+/* start address of first pci_iobar slot (user-space virtual-addres) */
+void *ioport_map;
+#if defined(RTE_ARCH_ARM) || defined(RTE_ARCH_ARM64)
+
+#include <sys/mman.h>
+#define DEV_NAME "/dev/igb_ioport"
+
+/* Keeping pci_ioport_size = 4k.
+ * So maximum mmaped pci_iobar supported =
+ * (ioport_size/pci_dev->mem_resource[0].len)
+ *
+ * note: kernel could allow maximum 32 virtio-net-pci interface, that mean
+ * maximum 32 PCI_IOBAR(s) where each PCI_IOBAR_LEN=0x20, so virtio_map_ioport()
+ * func by theory gonna support 4k/0x20 ==> 128 PCI_IOBAR(s), more than
+ * max-virtio-net-pci interface.
+ */
+#define PAGE_SIZE 4096
+#define PCI_IOPORT_SIZE PAGE_SIZE
+#define PCI_IOPORT_MAX 128 /* 4k / 0x20 */
+
+int ioport_map_cnt;
+#endif /* ARM, ARM64 */
+#endif /* RTE_EXEC_ENV_LINUXAPP */
static int eth_virtio_dev_init(struct rte_eth_dev *eth_dev);
static int eth_virtio_dev_uninit(struct rte_eth_dev *eth_dev);
@@ -497,6 +521,18 @@ virtio_dev_close(struct rte_eth_dev *dev)
hw->started = 0;
virtio_dev_free_mbufs(dev);
virtio_free_queues(dev);
+
+#ifdef RTE_EXEC_ENV_LINUXAPP
+#if defined(RTE_ARCH_ARM) || defined(RTE_ARCH_ARM64)
+
+ /* unmap ioport memory */
+ ioport_map_cnt--;
+ if (!ioport_map_cnt)
+ munmap(ioport_map, PCI_IOPORT_SIZE);
+
+ PMD_INIT_LOG(DEBUG, "unmapping ioport_mem %d\n", ioport_map_cnt);
+#endif
+#endif
}
static void
@@ -1172,7 +1208,6 @@ static int virtio_resource_init_by_ioports(struct rte_pci_device *pci_dev)
sscanf(ptr, "%04hx-%04hx", &start, &end);
size = end - start + 1;
-
break;
}
}
@@ -1256,6 +1291,81 @@ rx_func_get(struct rte_eth_dev *eth_dev)
eth_dev->rx_pkt_burst = &virtio_recv_pkts;
}
+#ifdef RTE_EXEC_ENV_LINUXAPP
+#if defined(RTE_ARCH_ARM) || defined(RTE_ARCH_ARM64)
+
+static int
+virtio_map_ioport(void **resource_addr)
+{
+ int fd;
+ int ret = 0;
+
+ fd = open(DEV_NAME, O_RDWR);
+ if (fd < 0) {
+ PMD_INIT_LOG(ERR, "device file %s open error: %d\n",
+ DEV_NAME, fd);
+ ret = -1;
+ goto out;
+ }
+
+ ioport_map = mmap(NULL, PCI_IOPORT_SIZE,
+ PROT_EXEC | PROT_WRITE | PROT_READ, MAP_SHARED, fd, 0);
+
+ if (ioport_map == MAP_FAILED) {
+ PMD_INIT_LOG(ERR, "mmap: failed to map bar Address=%p\n",
+ *resource_addr);
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ PMD_INIT_LOG(INFO, "First pci_iobar mapped at %p\n", ioport_map);
+
+out1:
+ close(fd);
+out:
+ return ret;
+}
+
+static int
+virtio_set_ioport_addr(void **resource_addr, unsigned long offset)
+{
+ int ret = 0;
+
+ if (ioport_map_cnt >= PCI_IOPORT_MAX) {
+ ret = -1;
+ PMD_INIT_LOG(ERR,
+ "ioport_map_cnt(%d) greater than"
+ "PCI_IOPORT_MAX(%d)\n",
+ ioport_map_cnt, PCI_IOPORT_MAX);
+ goto out;
+ }
+ *resource_addr = (void *)((char *)ioport_map + (ioport_map_cnt)*offset);
+ ioport_map_cnt++;
+
+ PMD_INIT_LOG(DEBUG, "pci.resource_addr %p ioport_map_cnt %d\n",
+ *resource_addr, ioport_map_cnt);
+out:
+ return ret;
+}
+#else /* !ARM, !ARM64 */
+static int
+virtio_map_ioport(void *resource_addr)
+{
+ (void)resource_addr;
+ return 0;
+}
+
+static int
+virtio_set_ioport_addr(void *resource_addr, unsigned long offset)
+{
+ (void)resource_addr;
+ (void)offset;
+ return 0;
+}
+
+#endif /* ARM, ARM64 */
+#endif /* RTE_EXEC_ENV_LINUXAPP */
+
/*
* This function is based on probe() function in virtio_pci.c
* It returns 0 on success.
@@ -1294,8 +1404,31 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
if (virtio_resource_init(pci_dev) < 0)
return -1;
+#ifdef RTE_EXEC_ENV_LINUXAPP
+ int ret = 0;
+
+ /* Map the all IOBAR entry from /proc/ioport to 4k page_size only once.
+ * Later virtio_set_ioport_addr() func will update correct bar_addr
+ * eachk ioport (i.e..pci_dev->mem_resource[0].addr)
+ */
+ if (!ioport_map) {
+ ret = virtio_map_ioport(&pci_dev->mem_resource[0].addr);
+ if (ret < 0)
+ return -1;
+ }
+
+ ret = virtio_set_ioport_addr(&pci_dev->mem_resource[0].addr,
+ pci_dev->mem_resource[0].len);
+ if (ret < 0)
+ return -1;
+
+ PMD_INIT_LOG(INFO, "ioport_map %p resource_addr %p resource_len :%ld\n",
+ ioport_map, pci_dev->mem_resource[0].addr,
+ (unsigned long)pci_dev->mem_resource[0].len);
+
+#endif
hw->use_msix = virtio_has_msix(&pci_dev->addr);
- hw->io_base = (uint32_t)(uintptr_t)pci_dev->mem_resource[0].addr;
+ hw->io_base = (unsigned long)(uintptr_t)pci_dev->mem_resource[0].addr;
/* Reset the device although not necessary at startup */
vtpci_reset(hw);
@@ -1430,7 +1563,6 @@ eth_virtio_dev_uninit(struct rte_eth_dev *eth_dev)
rte_intr_callback_unregister(&pci_dev->intr_handle,
virtio_interrupt_handler,
eth_dev);
-
PMD_INIT_LOG(DEBUG, "dev_uninit completed");
return 0;
diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index f5617d2..b154a44 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -324,6 +324,61 @@ igbuio_dom0_pci_mmap(struct uio_info *info, struct vm_area_struct *vma)
}
#endif
+#if defined(RTE_ARCH_ARM) || defined(RTE_ARCH_ARM64)
+#ifdef CONFIG_HAS_IOPORT_MAP
+/*
+ * mmap driver to map x86-style PCI_IOBAR (i.e..cat /proc/ioport pci-bar-memory)
+ * from kernel-space virtual address to user-space virtual address. This module
+ * required for non-x86 archs example arm/arm64, as those archs donot do
+ * IO_MAP_IO types access, Infact supports memory-mapped-IO. That is because
+ * arm/arm64 doesn't support direct IO instruction, so the design approach is to
+ * map `cat /proc/ioport` PCI_IOBAR's kernel-space virtual-addr to user-space
+ * virtual-addr. Therefore the need for mmap-driver.
+ */
+#include <linux/fs.h> /* file_operations */
+#include <linux/miscdevice.h>
+#include <linux/mm.h> /* VM_IO */
+#include <linux/uaccess.h>
+#include <asm/page.h>
+#include <linux/sched.h>
+#include <linux/pid.h>
+
+void *__iomem mapped_io; /* ioport addr of `cat /proc/ioport` */
+
+static int igb_ioport_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct page *npage;
+ int ret = 0;
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ npage = vmalloc_to_page(mapped_io);
+ ret = remap_pfn_range(vma, vma->vm_start,
+ page_to_pfn(npage),
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+ if (ret) {
+ pr_info("Error: Failed to remap pfn=%lu error=%d\n",
+ page_to_pfn(npage), ret);
+ }
+ return 0;
+}
+
+static const struct file_operations igb_ioport_fops = {
+ .mmap = igb_ioport_mmap,
+};
+
+static struct miscdevice igb_ioport_dev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "igb_ioport",
+ .fops = &igb_ioport_fops
+};
+#else /* !CONFIG_HAS_IOPORT_MAP */
+
+#error "CONFIG_HAS_IOPORT_MAP not supported for $RTE_ARCH"
+
+#endif /* CONFIG_HAS_IOPORT_MAP */
+#endif /* RTE_ARCH_ARM, RTE_ARCH_ARM64 */
+
/* Remap pci resources described by bar #pci_bar in uio resource n. */
static int
igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info *info,
@@ -365,11 +420,22 @@ igbuio_pci_setup_ioport(struct pci_dev *dev, struct uio_info *info,
if (addr == 0 || len == 0)
return -EINVAL;
+#if defined(RTE_ARCH_ARM) || defined(RTE_ARCH_ARM64)
+ /*
+ * TODO: KNI/procfs:: porttype entry need to be added for ARM/ARM64,
+ * for below mmap driver;
+ * */
+ mapped_io = ioport_map(addr, 0);
+ info->port[n].name = name;
+ info->port[n].start = (unsigned long)(uintptr_t)mapped_io;
+ info->port[n].size = len;
+ info->port[n].porttype = UIO_PORT_X86;
+#else
info->port[n].name = name;
info->port[n].start = addr;
info->port[n].size = len;
info->port[n].porttype = UIO_PORT_X86;
-
+#endif
return 0;
}
@@ -615,6 +681,15 @@ igbuio_pci_init_module(void)
{
int ret;
+#if defined(RTE_ARCH_ARM) || defined(RTE_ARCH_ARM64)
+ ret = misc_register(&igb_ioport_dev);
+ if (ret < 0) {
+ pr_info("Error: failed to register ioport map driver (%d)\n",
+ ret);
+ return ret;
+ }
+#endif
+
ret = igbuio_config_intr_mode(intr_mode);
if (ret < 0)
return ret;
@@ -625,6 +700,9 @@ igbuio_pci_init_module(void)
static void __exit
igbuio_pci_exit_module(void)
{
+#if defined(RTE_ARCH_ARM) || defined(RTE_ARCH_ARM64)
+ misc_deregister(&igb_ioport_dev);
+#endif
pci_unregister_driver(&igbuio_pci_driver);
}
--
1.7.9.5
More information about the dev
mailing list