[dpdk-dev] [PATCH v4 5/5] doc: Convert image extensions to wildcard

John McNamara john.mcnamara at intel.com
Tue Feb 3 15:11:18 CET 2015


Changed all image.svg and image.png extensions to image.*
This allows Sphinx to decide the appropriate image type
from the available image options.

Signed-off-by: John McNamara <john.mcnamara at intel.com>
---
 doc/guides/prog_guide/env_abstraction_layer.rst    |    2 +-
 .../prog_guide/i40e_ixgbe_igb_virt_func_drv.rst    |    8 ++--
 .../intel_dpdk_xen_based_packet_switch_sol.rst     |    6 ++--
 doc/guides/prog_guide/ivshmem_lib.rst              |    2 +-
 doc/guides/prog_guide/kernel_nic_interface.rst     |    8 ++--
 .../libpcap_ring_based_poll_mode_drv.rst           |    2 +-
 .../prog_guide/link_bonding_poll_mode_drv_lib.rst  |   14 ++++----
 doc/guides/prog_guide/lpm6_lib.rst                 |    2 +-
 doc/guides/prog_guide/lpm_lib.rst                  |    2 +-
 doc/guides/prog_guide/malloc_lib.rst               |    2 +-
 doc/guides/prog_guide/mbuf_lib.rst                 |    4 +-
 doc/guides/prog_guide/mempool_lib.rst              |    6 ++--
 doc/guides/prog_guide/multi_proc_support.rst       |    2 +-
 doc/guides/prog_guide/overview.rst                 |    2 +-
 doc/guides/prog_guide/packet_distrib_lib.rst       |    4 +-
 doc/guides/prog_guide/packet_framework.rst         |   14 ++++----
 .../poll_mode_drv_emulated_virtio_nic.rst          |    6 ++--
 .../poll_mode_drv_paravirtual_vmxnets_nic.rst      |    6 ++--
 doc/guides/prog_guide/qos_framework.rst            |   36 ++++++++++----------
 doc/guides/prog_guide/ring_lib.rst                 |   28 ++++++++--------
 doc/guides/sample_app_ug/dist_app.rst              |    4 +-
 doc/guides/sample_app_ug/exception_path.rst        |    2 +-
 doc/guides/sample_app_ug/intel_quickassist.rst     |    2 +-
 doc/guides/sample_app_ug/kernel_nic_interface.rst  |    4 +-
 .../sample_app_ug/l2_forward_real_virtual.rst      |    4 +-
 .../sample_app_ug/l3_forward_access_ctrl.rst       |    4 +-
 doc/guides/sample_app_ug/load_balancer.rst         |    2 +-
 doc/guides/sample_app_ug/multi_process.rst         |    8 ++--
 doc/guides/sample_app_ug/qos_scheduler.rst         |    2 +-
 doc/guides/sample_app_ug/quota_watermark.rst       |    6 ++--
 doc/guides/sample_app_ug/test_pipeline.rst         |    2 +-
 doc/guides/sample_app_ug/vhost.rst                 |   10 +++---
 doc/guides/sample_app_ug/vm_power_management.rst   |    4 +-
 doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst   |    2 +-
 34 files changed, 106 insertions(+), 106 deletions(-)

diff --git a/doc/guides/prog_guide/env_abstraction_layer.rst b/doc/guides/prog_guide/env_abstraction_layer.rst
index 231e266..45791b6 100644
--- a/doc/guides/prog_guide/env_abstraction_layer.rst
+++ b/doc/guides/prog_guide/env_abstraction_layer.rst
@@ -212,4 +212,4 @@ Memory zones can be reserved with specific start address alignment by supplying
 The alignment value should be a power of two and not less than the cache line size (64 bytes).
 Memory zones can also be reserved from either 2 MB or 1 GB hugepages, provided that both are available on the system.
 
-.. |linuxapp_launch| image:: img/linuxapp_launch.svg
+.. |linuxapp_launch| image:: img/linuxapp_launch.*
diff --git a/doc/guides/prog_guide/i40e_ixgbe_igb_virt_func_drv.rst b/doc/guides/prog_guide/i40e_ixgbe_igb_virt_func_drv.rst
index 41e316e..a984379 100755
--- a/doc/guides/prog_guide/i40e_ixgbe_igb_virt_func_drv.rst
+++ b/doc/guides/prog_guide/i40e_ixgbe_igb_virt_func_drv.rst
@@ -542,10 +542,10 @@ which belongs to the destination VF on the VM.
 
 |inter_vm_comms|
 
-.. |perf_benchmark| image:: img/perf_benchmark.png
+.. |perf_benchmark| image:: img/perf_benchmark.*
 
-.. |single_port_nic| image:: img/single_port_nic.png
+.. |single_port_nic| image:: img/single_port_nic.*
 
-.. |inter_vm_comms| image:: img/inter_vm_comms.png
+.. |inter_vm_comms| image:: img/inter_vm_comms.*
 
-.. |fast_pkt_proc| image:: img/fast_pkt_proc.png
+.. |fast_pkt_proc| image:: img/fast_pkt_proc.*
diff --git a/doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst b/doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst
index 1f1e04f..47841cd 100644
--- a/doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst
+++ b/doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst
@@ -457,8 +457,8 @@ The packet flow is:
 
 packet generator->Virtio in guest VM1->switching backend->Virtio in guest VM2->switching backend->wire
 
-.. |grant_table| image:: img/grant_table.png
+.. |grant_table| image:: img/grant_table.*
 
-.. |grant_refs| image:: img/grant_refs.png
+.. |grant_refs| image:: img/grant_refs.*
 
-.. |dpdk_xen_pkt_switch| image:: img/dpdk_xen_pkt_switch.png
+.. |dpdk_xen_pkt_switch| image:: img/dpdk_xen_pkt_switch.*
diff --git a/doc/guides/prog_guide/ivshmem_lib.rst b/doc/guides/prog_guide/ivshmem_lib.rst
index cd2f595..c76d2b3 100644
--- a/doc/guides/prog_guide/ivshmem_lib.rst
+++ b/doc/guides/prog_guide/ivshmem_lib.rst
@@ -155,4 +155,4 @@ As a result, if the user wishes to shut down or restart the IVSHMEM host applica
 it is not enough to simply shut the application down.
 The virtual machine must also be shut down (if not, it will hold onto outdated host data).
 
-.. |ivshmem| image:: img/ivshmem.png
+.. |ivshmem| image:: img/ivshmem.*
diff --git a/doc/guides/prog_guide/kernel_nic_interface.rst b/doc/guides/prog_guide/kernel_nic_interface.rst
index 0276019..6b1a16f 100644
--- a/doc/guides/prog_guide/kernel_nic_interface.rst
+++ b/doc/guides/prog_guide/kernel_nic_interface.rst
@@ -281,10 +281,10 @@ Even if the option is turned on, kni-vhost will ignore the information that the
 When working with legacy virtio on the guest, it is better to turn off unsupported offload features using ethtool -K.
 Otherwise, there may be problems such as an incorrect L4 checksum error.
 
-.. |kni_traffic_flow| image:: img/kni_traffic_flow.png
+.. |kni_traffic_flow| image:: img/kni_traffic_flow.*
 
-.. |vhost_net_arch| image:: img/vhost_net_arch.png
+.. |vhost_net_arch| image:: img/vhost_net_arch.*
 
-.. |pkt_flow_kni| image:: img/pkt_flow_kni.png
+.. |pkt_flow_kni| image:: img/pkt_flow_kni.*
 
-.. |kernel_nic_intf| image:: img/kernel_nic_intf.png
+.. |kernel_nic_intf| image:: img/kernel_nic_intf.*
diff --git a/doc/guides/prog_guide/libpcap_ring_based_poll_mode_drv.rst b/doc/guides/prog_guide/libpcap_ring_based_poll_mode_drv.rst
index 249a2e0..6e14fd1 100644
--- a/doc/guides/prog_guide/libpcap_ring_based_poll_mode_drv.rst
+++ b/doc/guides/prog_guide/libpcap_ring_based_poll_mode_drv.rst
@@ -268,4 +268,4 @@ while the rte_ring specific functions are direct function calls in the code and
    then calling rte_eth_rx_queue_setup() / tx_queue_setup() for each of those queues and
    finally calling rte_eth_dev_start() to allow transmission and reception of packets to begin.
 
-.. |forward_stats| image:: img/forward_stats.png
+.. |forward_stats| image:: img/forward_stats.*
diff --git a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
index cf6a6fa..24a1a36 100644
--- a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
+++ b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
@@ -434,10 +434,10 @@ Create a bonded device in balance mode with two slaves specified by their PCI ad
 
     $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'eth_bond0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained
 
-.. |bond-overview| image:: img/bond-overview.svg
-.. |bond-mode-0| image:: img/bond-mode-0.svg
-.. |bond-mode-1| image:: img/bond-mode-1.svg
-.. |bond-mode-2| image:: img/bond-mode-2.svg
-.. |bond-mode-3| image:: img/bond-mode-3.svg
-.. |bond-mode-4| image:: img/bond-mode-4.svg
-.. |bond-mode-5| image:: img/bond-mode-5.svg
+.. |bond-overview| image:: img/bond-overview.*
+.. |bond-mode-0| image:: img/bond-mode-0.*
+.. |bond-mode-1| image:: img/bond-mode-1.*
+.. |bond-mode-2| image:: img/bond-mode-2.*
+.. |bond-mode-3| image:: img/bond-mode-3.*
+.. |bond-mode-4| image:: img/bond-mode-4.*
+.. |bond-mode-5| image:: img/bond-mode-5.*
diff --git a/doc/guides/prog_guide/lpm6_lib.rst b/doc/guides/prog_guide/lpm6_lib.rst
index dd5d064..abc5adb 100644
--- a/doc/guides/prog_guide/lpm6_lib.rst
+++ b/doc/guides/prog_guide/lpm6_lib.rst
@@ -232,4 +232,4 @@ Use Case: IPv6 Forwarding
 
 The LPM algorithm is used to implement the Classless Inter-Domain Routing (CIDR) strategy used by routers implementing IP forwarding.
 
-.. |tbl24_tbl8_tbl8| image:: img/tbl24_tbl8_tbl8.png
+.. |tbl24_tbl8_tbl8| image:: img/tbl24_tbl8_tbl8.*
diff --git a/doc/guides/prog_guide/lpm_lib.rst b/doc/guides/prog_guide/lpm_lib.rst
index d1de87a..692e37f 100644
--- a/doc/guides/prog_guide/lpm_lib.rst
+++ b/doc/guides/prog_guide/lpm_lib.rst
@@ -220,4 +220,4 @@ References
 *   Pankaj Gupta, Algorithms for Routing Lookups and Packet Classification, PhD Thesis, Stanford University,
     2000  (`http://klamath.stanford.edu/~pankaj/thesis/ thesis_1sided.pdf <http://klamath.stanford.edu/~pankaj/thesis/%20thesis_1sided.pdf>`_ )
 
-.. |tbl24_tbl8| image:: img/tbl24_tbl8.png
+.. |tbl24_tbl8| image:: img/tbl24_tbl8.*
diff --git a/doc/guides/prog_guide/malloc_lib.rst b/doc/guides/prog_guide/malloc_lib.rst
index 63d87d9..b9298f8 100644
--- a/doc/guides/prog_guide/malloc_lib.rst
+++ b/doc/guides/prog_guide/malloc_lib.rst
@@ -233,4 +233,4 @@ and if so, they are merged with the current elements.
 This means that we can never have two free memory blocks adjacent to one another,
 they are always merged into a single block.
 
-.. |malloc_heap| image:: img/malloc_heap.png
+.. |malloc_heap| image:: img/malloc_heap.*
diff --git a/doc/guides/prog_guide/mbuf_lib.rst b/doc/guides/prog_guide/mbuf_lib.rst
index 3d59e96..43e6f3a 100644
--- a/doc/guides/prog_guide/mbuf_lib.rst
+++ b/doc/guides/prog_guide/mbuf_lib.rst
@@ -189,6 +189,6 @@ Use Cases
 
 All networking application should use mbufs to transport network packets.
 
-.. |mbuf1| image:: img/mbuf1.svg
+.. |mbuf1| image:: img/mbuf1.*
 
-.. |mbuf2| image:: img/mbuf2.svg
+.. |mbuf2| image:: img/mbuf2.*
diff --git a/doc/guides/prog_guide/mempool_lib.rst b/doc/guides/prog_guide/mempool_lib.rst
index b4704a7..f9b7cfe 100644
--- a/doc/guides/prog_guide/mempool_lib.rst
+++ b/doc/guides/prog_guide/mempool_lib.rst
@@ -141,8 +141,8 @@ Below are some examples:
 
 *   Any application that needs to allocate fixed-sized objects in the data plane and that will be continuously utilized by the system.
 
-.. |memory-management| image:: img/memory-management.svg
+.. |memory-management| image:: img/memory-management.*
 
-.. |memory-management2| image:: img/memory-management2.svg
+.. |memory-management2| image:: img/memory-management2.*
 
-.. |mempool| image:: img/mempool.svg
+.. |mempool| image:: img/mempool.*
diff --git a/doc/guides/prog_guide/multi_proc_support.rst b/doc/guides/prog_guide/multi_proc_support.rst
index deaae47..25a6056 100644
--- a/doc/guides/prog_guide/multi_proc_support.rst
+++ b/doc/guides/prog_guide/multi_proc_support.rst
@@ -200,4 +200,4 @@ instead of the functions which do the hashing internally, such as rte_hash_add()
     If the number of required DPDK processes exceeds that of the number of available HPET comparators,
     the TSC (which is the default timer in this release) must be used as a time source across all processes instead of the HPET.
 
-.. |multi_process_memory| image:: img/multi_process_memory.svg
+.. |multi_process_memory| image:: img/multi_process_memory.*
diff --git a/doc/guides/prog_guide/overview.rst b/doc/guides/prog_guide/overview.rst
index 6603409..062d923 100644
--- a/doc/guides/prog_guide/overview.rst
+++ b/doc/guides/prog_guide/overview.rst
@@ -204,4 +204,4 @@ The librte_net library is a collection of IP protocol definitions and convenienc
 It is based on code from the FreeBSD* IP stack and contains protocol numbers (for use in IP headers),
 IP-related macros, IPv4/IPv6 header structures and TCP, UDP and SCTP header structures.
 
-.. |architecture-overview| image:: img/architecture-overview.svg
+.. |architecture-overview| image:: img/architecture-overview.*
diff --git a/doc/guides/prog_guide/packet_distrib_lib.rst b/doc/guides/prog_guide/packet_distrib_lib.rst
index 18baf55..767accc 100644
--- a/doc/guides/prog_guide/packet_distrib_lib.rst
+++ b/doc/guides/prog_guide/packet_distrib_lib.rst
@@ -111,6 +111,6 @@ i.e. to save power at times of lighter load,
 it is possible to have a worker stop processing packets by calling "rte_distributor_return_pkt()" to indicate that
 it has finished the current packet and does not want a new one.
 
-.. |packet_distributor1| image:: img/packet_distributor1.png
+.. |packet_distributor1| image:: img/packet_distributor1.*
 
-.. |packet_distributor2| image:: img/packet_distributor2.png
+.. |packet_distributor2| image:: img/packet_distributor2.*
diff --git a/doc/guides/prog_guide/packet_framework.rst b/doc/guides/prog_guide/packet_framework.rst
index 537811b..8e8e32f 100644
--- a/doc/guides/prog_guide/packet_framework.rst
+++ b/doc/guides/prog_guide/packet_framework.rst
@@ -1168,16 +1168,16 @@ with all the implementations sharing the same API: pure SW implementation (no ac
 The selection between these implementations could be done at build time or at run-time (recommended), based on which accelerators are present in the system,
 with no application changes required.
 
-.. |figure33| image:: img/figure33.png
+.. |figure33| image:: img/figure33.*
 
-.. |figure35| image:: img/figure35.png
+.. |figure35| image:: img/figure35.*
 
-.. |figure39| image:: img/figure39.png
+.. |figure39| image:: img/figure39.*
 
-.. |figure34| image:: img/figure34.png
+.. |figure34| image:: img/figure34.*
 
-.. |figure32| image:: img/figure32.png
+.. |figure32| image:: img/figure32.*
 
-.. |figure37| image:: img/figure37.png
+.. |figure37| image:: img/figure37.*
 
-.. |figure38| image:: img/figure38.png
+.. |figure38| image:: img/figure38.*
diff --git a/doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst b/doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst
index 86f4f60..1daf280 100644
--- a/doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst
+++ b/doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst
@@ -205,8 +205,8 @@ The packet transmission flow is:
 
     IXIA packet generator-> Guest VM 82599 VF port1 rx burst-> Guest VM virtio port 0 tx burst-> tap -> Linux Bridge->82599 PF-> IXIA packet generator
 
-.. |host_vm_comms| image:: img/host_vm_comms.png
+.. |host_vm_comms| image:: img/host_vm_comms.*
 
-.. |console| image:: img/console.png
+.. |console| image:: img/console.*
 
-.. |host_vm_comms_qemu| image:: img/host_vm_comms_qemu.png
+.. |host_vm_comms_qemu| image:: img/host_vm_comms_qemu.*
diff --git a/doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst b/doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst
index e48bc13..fe4d6f1 100644
--- a/doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst
+++ b/doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst
@@ -177,8 +177,8 @@ In this example, the packet flow path is:
     Packet generator -> 82599 VF -> Guest VM 82599 port 0 rx burst -> Guest VM VMXNET3 port 1 tx burst -> VMXNET3
     device -> VMware ESXi vSwitch -> VMXNET3 device -> Guest VM VMXNET3 port 0 rx burst -> Guest VM 82599 VF port 1 tx burst -> 82599 VF -> Packet generator
 
-.. |vm_vm_comms| image:: img/vm_vm_comms.png
+.. |vm_vm_comms| image:: img/vm_vm_comms.*
 
-.. |vmxnet3_int| image:: img/vmxnet3_int.png
+.. |vmxnet3_int| image:: img/vmxnet3_int.*
 
-.. |vswitch_vm| image:: img/vswitch_vm.png
+.. |vswitch_vm| image:: img/vswitch_vm.*
diff --git a/doc/guides/prog_guide/qos_framework.rst b/doc/guides/prog_guide/qos_framework.rst
index 087f3c4..b609841 100644
--- a/doc/guides/prog_guide/qos_framework.rst
+++ b/doc/guides/prog_guide/qos_framework.rst
@@ -1728,38 +1728,38 @@ For each input packet, the steps for the srTCM / trTCM algorithms are:
     When the output color is not red, a number of tokens equal to the length of the IP packet are
     subtracted from the C or E /P or both buckets, depending on the algorithm and the output color of the packet.
 
-.. |flow_tru_droppper| image:: img/flow_tru_droppper.png
+.. |flow_tru_droppper| image:: img/flow_tru_droppper.*
 
-.. |drop_probability_graph| image:: img/drop_probability_graph.png
+.. |drop_probability_graph| image:: img/drop_probability_graph.*
 
-.. |drop_probability_eq3| image:: img/drop_probability_eq3.png
+.. |drop_probability_eq3| image:: img/drop_probability_eq3.*
 
-.. |eq2_expression| image:: img/eq2_expression.png
+.. |eq2_expression| image:: img/eq2_expression.*
 
-.. |drop_probability_eq4| image:: img/drop_probability_eq4.png
+.. |drop_probability_eq4| image:: img/drop_probability_eq4.*
 
-.. |pkt_drop_probability| image:: img/pkt_drop_probability.png
+.. |pkt_drop_probability| image:: img/pkt_drop_probability.*
 
-.. |pkt_proc_pipeline_qos| image:: img/pkt_proc_pipeline_qos.png
+.. |pkt_proc_pipeline_qos| image:: img/pkt_proc_pipeline_qos.*
 
-.. |ex_data_flow_tru_dropper| image:: img/ex_data_flow_tru_dropper.png
+.. |ex_data_flow_tru_dropper| image:: img/ex_data_flow_tru_dropper.*
 
-.. |ewma_filter_eq_1| image:: img/ewma_filter_eq_1.png
+.. |ewma_filter_eq_1| image:: img/ewma_filter_eq_1.*
 
-.. |ewma_filter_eq_2| image:: img/ewma_filter_eq_2.png
+.. |ewma_filter_eq_2| image:: img/ewma_filter_eq_2.*
 
-.. |data_struct_per_port| image:: img/data_struct_per_port.png
+.. |data_struct_per_port| image:: img/data_struct_per_port.*
 
-.. |prefetch_pipeline| image:: img/prefetch_pipeline.png
+.. |prefetch_pipeline| image:: img/prefetch_pipeline.*
 
-.. |pipe_prefetch_sm| image:: img/pipe_prefetch_sm.png
+.. |pipe_prefetch_sm| image:: img/pipe_prefetch_sm.*
 
-.. |blk_diag_dropper| image:: img/blk_diag_dropper.png
+.. |blk_diag_dropper| image:: img/blk_diag_dropper.*
 
-.. |m_definition| image:: img/m_definition.png
+.. |m_definition| image:: img/m_definition.*
 
-.. |eq2_factor| image:: img/eq2_factor.png
+.. |eq2_factor| image:: img/eq2_factor.*
 
-.. |sched_hier_per_port| image:: img/sched_hier_per_port.png
+.. |sched_hier_per_port| image:: img/sched_hier_per_port.*
 
-.. |hier_sched_blk| image:: img/hier_sched_blk.png
+.. |hier_sched_blk| image:: img/hier_sched_blk.*
diff --git a/doc/guides/prog_guide/ring_lib.rst b/doc/guides/prog_guide/ring_lib.rst
index 95f773e..8547b38 100644
--- a/doc/guides/prog_guide/ring_lib.rst
+++ b/doc/guides/prog_guide/ring_lib.rst
@@ -347,30 +347,30 @@ References
 
     *   `Linux Lockless Ring Buffer Design <http://lwn.net/Articles/340400/>`_
 
-.. |ring1| image:: img/ring1.svg
+.. |ring1| image:: img/ring1.*
 
-.. |ring-enqueue1| image:: img/ring-enqueue1.svg
+.. |ring-enqueue1| image:: img/ring-enqueue1.*
 
-.. |ring-enqueue2| image:: img/ring-enqueue2.svg
+.. |ring-enqueue2| image:: img/ring-enqueue2.*
 
-.. |ring-enqueue3| image:: img/ring-enqueue3.svg
+.. |ring-enqueue3| image:: img/ring-enqueue3.*
 
-.. |ring-dequeue1| image:: img/ring-dequeue1.svg
+.. |ring-dequeue1| image:: img/ring-dequeue1.*
 
-.. |ring-dequeue2| image:: img/ring-dequeue2.svg
+.. |ring-dequeue2| image:: img/ring-dequeue2.*
 
-.. |ring-dequeue3| image:: img/ring-dequeue3.svg
+.. |ring-dequeue3| image:: img/ring-dequeue3.*
 
-.. |ring-mp-enqueue1| image:: img/ring-mp-enqueue1.svg
+.. |ring-mp-enqueue1| image:: img/ring-mp-enqueue1.*
 
-.. |ring-mp-enqueue2| image:: img/ring-mp-enqueue2.svg
+.. |ring-mp-enqueue2| image:: img/ring-mp-enqueue2.*
 
-.. |ring-mp-enqueue3| image:: img/ring-mp-enqueue3.svg
+.. |ring-mp-enqueue3| image:: img/ring-mp-enqueue3.*
 
-.. |ring-mp-enqueue4| image:: img/ring-mp-enqueue4.svg
+.. |ring-mp-enqueue4| image:: img/ring-mp-enqueue4.*
 
-.. |ring-mp-enqueue5| image:: img/ring-mp-enqueue5.svg
+.. |ring-mp-enqueue5| image:: img/ring-mp-enqueue5.*
 
-.. |ring-modulo1| image:: img/ring-modulo1.svg
+.. |ring-modulo1| image:: img/ring-modulo1.*
 
-.. |ring-modulo2| image:: img/ring-modulo2.svg
+.. |ring-modulo2| image:: img/ring-modulo2.*
diff --git a/doc/guides/sample_app_ug/dist_app.rst b/doc/guides/sample_app_ug/dist_app.rst
index 5767e3f..bcff0dd 100644
--- a/doc/guides/sample_app_ug/dist_app.rst
+++ b/doc/guides/sample_app_ug/dist_app.rst
@@ -172,6 +172,6 @@ Sample Application. See Section 9.4.4, "RX Queue Initialization".
 TX queue initialization is done in the same way as it is done in the L2 Forwarding
 Sample Application. See Section 9.4.5, "TX Queue Initialization".
 
-.. |dist_perf| image:: img/dist_perf.svg
+.. |dist_perf| image:: img/dist_perf.*
 
-.. |dist_app| image:: img/dist_app.svg
+.. |dist_app| image:: img/dist_app.*
diff --git a/doc/guides/sample_app_ug/exception_path.rst b/doc/guides/sample_app_ug/exception_path.rst
index 0b71f9e..6c06959 100644
--- a/doc/guides/sample_app_ug/exception_path.rst
+++ b/doc/guides/sample_app_ug/exception_path.rst
@@ -327,4 +327,4 @@ To remove bridges and persistent TAP interfaces, the following commands are used
     brctl delbr br0
     openvpn --rmtun --dev tap_dpdk_00
 
-.. |exception_path_example| image:: img/exception_path_example.svg
+.. |exception_path_example| image:: img/exception_path_example.*
diff --git a/doc/guides/sample_app_ug/intel_quickassist.rst b/doc/guides/sample_app_ug/intel_quickassist.rst
index d063f08..7f55282 100644
--- a/doc/guides/sample_app_ug/intel_quickassist.rst
+++ b/doc/guides/sample_app_ug/intel_quickassist.rst
@@ -221,4 +221,4 @@ performing AES-CBC-128 encryption with AES-XCBC-MAC-96 hash, the following setti
 Refer to the *DPDK Test Report* for more examples of traffic generator setup and the application startup command lines.
 If no errors are generated in response to the startup commands, the application is running correctly.
 
-.. |quickassist_block_diagram| image:: img/quickassist_block_diagram.png
+.. |quickassist_block_diagram| image:: img/quickassist_block_diagram.*
diff --git a/doc/guides/sample_app_ug/kernel_nic_interface.rst b/doc/guides/sample_app_ug/kernel_nic_interface.rst
index e32fbbf..d6876e2 100644
--- a/doc/guides/sample_app_ug/kernel_nic_interface.rst
+++ b/doc/guides/sample_app_ug/kernel_nic_interface.rst
@@ -75,7 +75,7 @@ The packet flow through the Kernel NIC Interface application is as shown in the
 
 **Figure 2. Kernel NIC Application Packet Flow**
 
-.. image3_png has been renamed to kernel_nic.png
+.. image3_png has been renamed to kernel_nic.*
 
 |kernel_nic|
 
@@ -617,4 +617,4 @@ Currently, setting a new MTU and configuring the network interface (up/ down) ar
         return ret;
     }
 
-.. |kernel_nic| image:: img/kernel_nic.png
+.. |kernel_nic| image:: img/kernel_nic.*
diff --git a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
index f9360c4..234d71d 100644
--- a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
+++ b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
@@ -527,6 +527,6 @@ however it improves performance:
         prev_tsc = cur_tsc;
     }
 
-.. |l2_fwd_benchmark_setup| image:: img/l2_fwd_benchmark_setup.svg
+.. |l2_fwd_benchmark_setup| image:: img/l2_fwd_benchmark_setup.*
 
-.. |l2_fwd_virtenv_benchmark_setup| image:: img/l2_fwd_virtenv_benchmark_setup.png
+.. |l2_fwd_virtenv_benchmark_setup| image:: img/l2_fwd_virtenv_benchmark_setup.*
diff --git a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
index 79ba24d..73fa4df 100644
--- a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
+++ b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
@@ -398,6 +398,6 @@ adds rules parsed from the file into the database and build an ACL trie.
 It is important to note that the application creates an independent copy of each database for each socket CPU
 involved in the task to reduce the time for remote memory access.
 
-.. |ipv4_acl_rule| image:: img/ipv4_acl_rule.png
+.. |ipv4_acl_rule| image:: img/ipv4_acl_rule.*
 
-.. |example_rules| image:: img/example_rules.png
+.. |example_rules| image:: img/example_rules.*
diff --git a/doc/guides/sample_app_ug/load_balancer.rst b/doc/guides/sample_app_ug/load_balancer.rst
index 8ec47ae..6237633 100644
--- a/doc/guides/sample_app_ug/load_balancer.rst
+++ b/doc/guides/sample_app_ug/load_balancer.rst
@@ -242,4 +242,4 @@ are on the same or different CPU sockets, the following run-time scenarios are p
     then it has to be transmitted out by a NIC connected to socket C.
     The performance price for crossing the CPU socket boundary is paid twice for this packet.
 
-.. |load_bal_app_arch| image:: img/load_bal_app_arch.png
+.. |load_bal_app_arch| image:: img/load_bal_app_arch.*
diff --git a/doc/guides/sample_app_ug/multi_process.rst b/doc/guides/sample_app_ug/multi_process.rst
index 9797cc9..7ca71ca 100644
--- a/doc/guides/sample_app_ug/multi_process.rst
+++ b/doc/guides/sample_app_ug/multi_process.rst
@@ -775,10 +775,10 @@ so it remaps the resource to the new core ID slot.
         return 0;
     }
 
-.. |sym_multi_proc_app| image:: img/sym_multi_proc_app.png
+.. |sym_multi_proc_app| image:: img/sym_multi_proc_app.*
 
-.. |client_svr_sym_multi_proc_app| image:: img/client_svr_sym_multi_proc_app.png
+.. |client_svr_sym_multi_proc_app| image:: img/client_svr_sym_multi_proc_app.*
 
-.. |master_slave_proc| image:: img/master_slave_proc.png
+.. |master_slave_proc| image:: img/master_slave_proc.*
 
-.. |slave_proc_recov| image:: img/slave_proc_recov.png
+.. |slave_proc_recov| image:: img/slave_proc_recov.*
diff --git a/doc/guides/sample_app_ug/qos_scheduler.rst b/doc/guides/sample_app_ug/qos_scheduler.rst
index 8611eae..56326df 100644
--- a/doc/guides/sample_app_ug/qos_scheduler.rst
+++ b/doc/guides/sample_app_ug/qos_scheduler.rst
@@ -348,4 +348,4 @@ This application classifies based on the QinQ double VLAN tags and the IP destin
 
 Please refer to the "QoS Scheduler" chapter in the *DPDK Programmer's Guide* for more information about these parameters.
 
-.. |qos_sched_app_arch| image:: img/qos_sched_app_arch.png
+.. |qos_sched_app_arch| image:: img/qos_sched_app_arch.*
diff --git a/doc/guides/sample_app_ug/quota_watermark.rst b/doc/guides/sample_app_ug/quota_watermark.rst
index 7115635..e091ad9 100644
--- a/doc/guides/sample_app_ug/quota_watermark.rst
+++ b/doc/guides/sample_app_ug/quota_watermark.rst
@@ -499,8 +499,8 @@ low_watermark from the rte_memzone previously created by qw.
         low_watermark = (unsigned int *) qw_memzone->addr + sizeof(int);
     }
 
-.. |pipeline_overview| image:: img/pipeline_overview.png
+.. |pipeline_overview| image:: img/pipeline_overview.*
 
-.. |ring_pipeline_perf_setup| image:: img/ring_pipeline_perf_setup.png
+.. |ring_pipeline_perf_setup| image:: img/ring_pipeline_perf_setup.*
 
-.. |threads_pipelines| image:: img/threads_pipelines.png
+.. |threads_pipelines| image:: img/threads_pipelines.*
diff --git a/doc/guides/sample_app_ug/test_pipeline.rst b/doc/guides/sample_app_ug/test_pipeline.rst
index a5fed8a..0432942 100644
--- a/doc/guides/sample_app_ug/test_pipeline.rst
+++ b/doc/guides/sample_app_ug/test_pipeline.rst
@@ -282,4 +282,4 @@ The profile for input traffic is TCP/IPv4 packets with:
 
 *   source TCP port fixed to 0
 
-.. |test_pipeline_app| image:: img/test_pipeline_app.png
+.. |test_pipeline_app| image:: img/test_pipeline_app.*
diff --git a/doc/guides/sample_app_ug/vhost.rst b/doc/guides/sample_app_ug/vhost.rst
index fa53db6..4a6d434 100644
--- a/doc/guides/sample_app_ug/vhost.rst
+++ b/doc/guides/sample_app_ug/vhost.rst
@@ -747,12 +747,12 @@ The above message indicates that device 0 has been registered with MAC address c
 Any packets received on the NIC with these values is placed on the devices receive queue.
 When a virtio-net device transmits packets, the VLAN tag is added to the packet by the DPDK vhost sample code.
 
-.. |vhost_net_arch| image:: img/vhost_net_arch.png
+.. |vhost_net_arch| image:: img/vhost_net_arch.*
 
-.. |qemu_virtio_net| image:: img/qemu_virtio_net.png
+.. |qemu_virtio_net| image:: img/qemu_virtio_net.*
 
-.. |tx_dpdk_testpmd| image:: img/tx_dpdk_testpmd.png
+.. |tx_dpdk_testpmd| image:: img/tx_dpdk_testpmd.*
 
-.. |vhost_net_sample_app| image:: img/vhost_net_sample_app.png
+.. |vhost_net_sample_app| image:: img/vhost_net_sample_app.*
 
-.. |virtio_linux_vhost| image:: img/virtio_linux_vhost.png
+.. |virtio_linux_vhost| image:: img/virtio_linux_vhost.*
diff --git a/doc/guides/sample_app_ug/vm_power_management.rst b/doc/guides/sample_app_ug/vm_power_management.rst
index 16f44c4..2a923d8 100644
--- a/doc/guides/sample_app_ug/vm_power_management.rst
+++ b/doc/guides/sample_app_ug/vm_power_management.rst
@@ -356,6 +356,6 @@ Where {core_num} is the lcore and channel to change frequency by scaling up/down
 
   set_cpu_freq {core_num} up|down|min|max
 
-.. |vm_power_mgr_highlevel| image:: img/vm_power_mgr_highlevel.svg
+.. |vm_power_mgr_highlevel| image:: img/vm_power_mgr_highlevel.*
 
-.. |vm_power_mgr_vm_request_seq| image:: img/vm_power_mgr_vm_request_seq.svg
+.. |vm_power_mgr_vm_request_seq| image:: img/vm_power_mgr_vm_request_seq.*
diff --git a/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst b/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
index 15c783a..e5d34e1 100644
--- a/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
+++ b/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
@@ -248,4 +248,4 @@ To generate the statistics output, use the following command:
 Please note that the statistics output will appear on the terminal where the vmdq_dcb_app is running,
 rather than the terminal from which the HUP signal was sent.
 
-.. |vmdq_dcb_example| image:: img/vmdq_dcb_example.svg
+.. |vmdq_dcb_example| image:: img/vmdq_dcb_example.*
-- 
1.7.4.1



More information about the dev mailing list