[dpdk-dev] [PATCH 0/4] Broadcom 10G NIC Poll Mode Driver
Jun Xiao
xiaojuntime at gmail.com
Sat Feb 7 10:15:17 CET 2015
Hi Stephen,
Thanks for your great work on this!
Could you elaborate on a few things:
- What's the methodology used in the driver porting?
e.g. what's the base source you ported from?
what's the major change against the base source?
- What kind of tests have been done on Linux? any known limitations?
Thanks,
Jun
On Sat, Feb 7, 2015 at 2:36 AM, Stephen Hemminger
<stephen at networkplumber.org> wrote:
> From: Stephen Hemminger <shemming at brocade.com>
>
> These are the patches to enable supporting the Broadcom
> NetExtreme II 10G devices (show up as bnx2x on Linux).
>
> The driver has only been tested on Linux, there maybe issues
> with firmware loading and PCI config access on BSD.
>
> Stephen Hemminger (4):
> pci: allow access to PCI config space
> bcm: add BCM pci device ids
> bcm: new poll mode driver
> bcm: enable BCM poll mode driver in config
>
> config/common_linuxapp | 10 +
> lib/Makefile | 1 +
> lib/librte_eal/common/include/rte_pci.h | 29 +
> lib/librte_eal/common/include/rte_pci_dev_ids.h | 30 +
> lib/librte_eal/linuxapp/eal/eal_pci.c | 15 +
> lib/librte_eal/linuxapp/eal/eal_pci_uio.c | 10 +
> lib/librte_eal/linuxapp/eal/rte_eal_version.map | 2 +
> lib/librte_pmd_bcm/Makefile | 28 +
> lib/librte_pmd_bcm/bcm.c | 11817 +++++++++++++++++++
> lib/librte_pmd_bcm/bcm.h | 1998 ++++
> lib/librte_pmd_bcm/bcm_ethdev.c | 544 +
> lib/librte_pmd_bcm/bcm_ethdev.h | 79 +
> lib/librte_pmd_bcm/bcm_logs.h | 51 +
> lib/librte_pmd_bcm/bcm_rxtx.c | 487 +
> lib/librte_pmd_bcm/bcm_rxtx.h | 85 +
> lib/librte_pmd_bcm/bcm_stats.c | 1619 +++
> lib/librte_pmd_bcm/bcm_stats.h | 633 +
> lib/librte_pmd_bcm/bcm_vfpf.c | 597 +
> lib/librte_pmd_bcm/bcm_vfpf.h | 315 +
> lib/librte_pmd_bcm/debug.c | 113 +
> lib/librte_pmd_bcm/ecore_fw_defs.h | 423 +
> lib/librte_pmd_bcm/ecore_hsi.h | 6349 ++++++++++
> lib/librte_pmd_bcm/ecore_init.h | 842 ++
> lib/librte_pmd_bcm/ecore_init_ops.h | 886 ++
> lib/librte_pmd_bcm/ecore_mfw_req.h | 207 +
> lib/librte_pmd_bcm/ecore_reg.h | 3664 ++++++
> lib/librte_pmd_bcm/ecore_sp.c | 5455 +++++++++
> lib/librte_pmd_bcm/ecore_sp.h | 1796 +++
> lib/librte_pmd_bcm/elink.c | 13378 ++++++++++++++++++++++
> lib/librte_pmd_bcm/elink.h | 610 +
> 30 files changed, 52073 insertions(+)
> create mode 100644 lib/librte_pmd_bcm/Makefile
> create mode 100644 lib/librte_pmd_bcm/bcm.c
> create mode 100644 lib/librte_pmd_bcm/bcm.h
> create mode 100644 lib/librte_pmd_bcm/bcm_ethdev.c
> create mode 100644 lib/librte_pmd_bcm/bcm_ethdev.h
> create mode 100644 lib/librte_pmd_bcm/bcm_logs.h
> create mode 100644 lib/librte_pmd_bcm/bcm_rxtx.c
> create mode 100644 lib/librte_pmd_bcm/bcm_rxtx.h
> create mode 100644 lib/librte_pmd_bcm/bcm_stats.c
> create mode 100644 lib/librte_pmd_bcm/bcm_stats.h
> create mode 100644 lib/librte_pmd_bcm/bcm_vfpf.c
> create mode 100644 lib/librte_pmd_bcm/bcm_vfpf.h
> create mode 100644 lib/librte_pmd_bcm/debug.c
> create mode 100644 lib/librte_pmd_bcm/ecore_fw_defs.h
> create mode 100644 lib/librte_pmd_bcm/ecore_hsi.h
> create mode 100644 lib/librte_pmd_bcm/ecore_init.h
> create mode 100644 lib/librte_pmd_bcm/ecore_init_ops.h
> create mode 100644 lib/librte_pmd_bcm/ecore_mfw_req.h
> create mode 100644 lib/librte_pmd_bcm/ecore_reg.h
> create mode 100644 lib/librte_pmd_bcm/ecore_sp.c
> create mode 100644 lib/librte_pmd_bcm/ecore_sp.h
> create mode 100644 lib/librte_pmd_bcm/elink.c
> create mode 100644 lib/librte_pmd_bcm/elink.h
>
> --
> 2.1.4
>
More information about the dev
mailing list