[dpdk-dev] [PATCH v3 1/5] ethdev: add rx interrupt enable/disable functions

Zhou, Danny danny.zhou at intel.com
Thu Feb 19 08:58:38 CET 2015



> -----Original Message-----
> From: Neil Horman [mailto:nhorman at tuxdriver.com]
> Sent: Tuesday, February 17, 2015 11:55 PM
> To: Zhou, Danny
> Cc: dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v3 1/5] ethdev: add rx interrupt enable/disable functions
> 
> On Tue, Feb 17, 2015 at 09:47:15PM +0800, Zhou Danny wrote:
> > v3 changes
> > - Add return value for interrupt enable/disable functions
> >
> > Add two dev_ops functions to enable and disable rx queue interrupts
> >
> > Signed-off-by: Danny Zhou <danny.zhou at intel.com>
> > Tested-by: Yong Liu <yong.liu at intel.com>
> > ---
> >  lib/librte_ether/rte_ethdev.c | 43 ++++++++++++++++++++++++++++++++
> >  lib/librte_ether/rte_ethdev.h | 57 +++++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 100 insertions(+)
> >
> > diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> > index ea3a1fb..d27469a 100644
> > --- a/lib/librte_ether/rte_ethdev.c
> > +++ b/lib/librte_ether/rte_ethdev.c
> > @@ -2825,6 +2825,49 @@ _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
> >  	}
> >  	rte_spinlock_unlock(&rte_eth_dev_cb_lock);
> >  }
> > +
> > +int
> > +rte_eth_dev_rx_queue_intr_enable(uint8_t port_id,
> > +				uint16_t queue_id)
> > +{
> > +	struct rte_eth_dev *dev;
> > +
> > +	if (port_id >= nb_ports) {
> > +		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> > +		return (-ENODEV);
> > +	}
> > +
> > +	dev = &rte_eth_devices[port_id];
> > +	if (dev == NULL) {
> > +		PMD_DEBUG_TRACE("Invalid port device\n");
> > +		return (-ENODEV);
> > +	}
> > +
> > +	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_enable, -ENOTSUP);
> > +	return (*dev->dev_ops->rx_queue_intr_enable)(dev, queue_id);
> > +}
> > +
> > +int
> > +rte_eth_dev_rx_queue_intr_disable(uint8_t port_id,
> > +				uint16_t queue_id)
> > +{
> > +	struct rte_eth_dev *dev;
> > +
> > +	if (port_id >= nb_ports) {
> > +		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> > +		return (-ENODEV);
> > +	}
> > +
> > +	dev = &rte_eth_devices[port_id];
> > +	if (dev == NULL) {
> > +		PMD_DEBUG_TRACE("Invalid port device\n");
> > +		return (-ENODEV);
> > +	}
> > +
> > +	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_disable, -ENOTSUP);
> > +	return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id);
> > +}
> > +
> >  #ifdef RTE_NIC_BYPASS
> >  int rte_eth_dev_bypass_init(uint8_t port_id)
> >  {
> > diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> > index 84160c3..0f320a9 100644
> > --- a/lib/librte_ether/rte_ethdev.h
> > +++ b/lib/librte_ether/rte_ethdev.h
> > @@ -848,6 +848,8 @@ struct rte_eth_fdir {
> >  struct rte_intr_conf {
> >  	/** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
> >  	uint16_t lsc;
> > +	/** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
> > +	uint16_t rxq;
> >  };
> >
> >  /**
> > @@ -1109,6 +1111,14 @@ typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev,
> >  				    const struct rte_eth_txconf *tx_conf);
> >  /**< @internal Setup a transmit queue of an Ethernet device. */
> >
> > +typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev *dev,
> > +				    uint16_t rx_queue_id);
> > +/**< @internal Enable interrupt of a receive queue of an Ethernet device. */
> > +
> > +typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev,
> > +				    uint16_t rx_queue_id);
> > +/**< @internal Disable interrupt of a receive queue of an Ethernet device. */
> > +
> >  typedef void (*eth_queue_release_t)(void *queue);
> >  /**< @internal Release memory resources allocated by given RX/TX queue. */
> >
> > @@ -1445,6 +1455,8 @@ struct eth_dev_ops {
> >  	eth_queue_start_t          tx_queue_start;/**< Start TX for a queue.*/
> >  	eth_queue_stop_t           tx_queue_stop;/**< Stop TX for a queue.*/
> >  	eth_rx_queue_setup_t       rx_queue_setup;/**< Set up device RX queue.*/
> > +	eth_rx_enable_intr_t       rx_queue_intr_enable; /**< Enable Rx queue interrupt. */
> > +	eth_rx_disable_intr_t      rx_queue_intr_disable; /**< Disable Rx queue interrupt.*/
> Put these at the end of eth_dev_ops if you want to avoid breaking ABI

I purposely add those two APIs at current position to ensure all rxq related APIs are declared together
in eth_dev_ops. Anyway, moving them to the end is ok to me for the reason of ABI, though the code looks
a little bit ugly.

> 
> >  	eth_queue_release_t        rx_queue_release;/**< Release RX queue.*/
> >  	eth_rx_queue_count_t       rx_queue_count; /**< Get Rx queue count. */
> >  	eth_rx_descriptor_done_t   rx_descriptor_done;  /**< Check rxd DD bit */
> > @@ -2811,6 +2823,51 @@ void _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
> >  				enum rte_eth_event_type event);
> >
> >  /**
> > + * When there is no rx packet coming in Rx Queue for a long time, we can
> > + * sleep lcore related to RX Queue for power saving, and enable rx interrupt
> > + * to be triggered when rx packect arrives.
> > + *
> > + * The rte_eth_dev_rx_queue_intr_enable() function enables rx queue
> > + * interrupt on specific rx queue of a port.
> > + *
> > + * @param port_id
> > + *   The port identifier of the Ethernet device.
> > + * @param queue_id
> > + *   The index of the receive queue from which to retrieve input packets.
> > + *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
> > + *   to rte_eth_dev_configure().
> > + * @return
> > + *   - (0) if successful.
> > + *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
> > + *     that operation.
> > + *   - (-ENODEV) if *port_id* invalid.
> > + */
> > +int rte_eth_dev_rx_queue_intr_enable(uint8_t port_id,
> > +				uint16_t queue_id);
> > +
> > +/**
> > + * When lcore wakes up from rx interrupt indicating packet coming, disable rx
> > + * interrupt and returns to polling mode.
> > + *
> > + * The rte_eth_dev_rx_queue_intr_disable() function disables rx queue
> > + * interrupt on specific rx queue of a port.
> > + *
> > + * @param port_id
> > + *   The port identifier of the Ethernet device.
> > + * @param queue_id
> > + *   The index of the receive queue from which to retrieve input packets.
> > + *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
> > + *   to rte_eth_dev_configure().
> > + * @return
> > + *   - (0) if successful.
> > + *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
> > + *     that operation.
> > + *   - (-ENODEV) if *port_id* invalid.
> > + */
> > +int rte_eth_dev_rx_queue_intr_disable(uint8_t port_id,
> > +				uint16_t queue_id);
> > +
> > +/**
> >   * Turn on the LED on the Ethernet device.
> >   * This function turns on the LED on the Ethernet device.
> >   *
> > --
> > 1.8.1.4
> >
> >


More information about the dev mailing list