[dpdk-dev] [PATCH v2] testpmd check return value of rte_eth_dev_vlan_filter()

Jastrzebski, MichalX K michalx.k.jastrzebski at intel.com
Fri Feb 20 10:08:48 CET 2015


> -----Original Message-----
> From: Qiu, Michael
> Sent: Wednesday, January 28, 2015 2:38 AM
> To: Jastrzebski, MichalX K; dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v2] testpmd check return value of
> rte_eth_dev_vlan_filter()
> 
> On 1/28/2015 1:20 AM, Michal Jastrzebski wrote:
> > This patch modifies testpmd behavior when setting:
> > rx_vlan add all vf_port (enabling all vlanids
> > to be passed thru rx filter on VF).
> > Rx_vlan_all_filter_set() function,
> > checks if the next vlanid can be enabled by the driver.
> > Number of vlanids is limited by the NIC and thus the NIC
> > do not allow to enable more vlanids than it can allocate
> > in VFTA table.
> 
> But what about if it is caused by other issue to lead a enable failure?

Hi Michael,
I am sorry I am writing almost a month after you reply
But I had another issues required a 100% attention.

As I see in the function:
rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on);
arguments like port_id and vlan_id are checked.  Also if vlan-filtering
is enabled is checked. Each error is printed so the user is informed that
something went wrong and where to look for it.
I don't know what else could be checked here?

> 
> 
> > v2 - fix formatting errors
> >
> > Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski at intel.com>
> > ---
> >  app/test-pmd/config.c         |   15 +++++++++------
> >  app/test-pmd/testpmd.h        |    2 +-
> >  lib/librte_ether/rte_ethdev.c |    4 ++--
> >  3 files changed, 12 insertions(+), 9 deletions(-)
> >
> > diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> > index c40f819..eda737e 100644
> > --- a/app/test-pmd/config.c
> > +++ b/app/test-pmd/config.c
> > @@ -1643,21 +1643,22 @@ rx_vlan_filter_set(portid_t port_id, int on)
> >  	       "diag=%d\n", port_id, on, diag);
> >  }
> >
> > -void
> > +int
> >  rx_vft_set(portid_t port_id, uint16_t vlan_id, int on)
> >  {
> >  	int diag;
> >
> >  	if (port_id_is_invalid(port_id))
> > -		return;
> > +		return 1;
> >  	if (vlan_id_is_invalid(vlan_id))
> > -		return;
> > +		return 1;
> >  	diag = rte_eth_dev_vlan_filter(port_id, vlan_id, on);
> >  	if (diag == 0)
> > -		return;
> > +		return 0;
> >  	printf("rte_eth_dev_vlan_filter(port_pi=%d, vlan_id=%d, on=%d)
> failed "
> >  	       "diag=%d\n",
> >  	       port_id, vlan_id, on, diag);
> > +	return -1;
> >  }
> >
> >  void
> > @@ -1667,8 +1668,10 @@ rx_vlan_all_filter_set(portid_t port_id, int on)
> >
> >  	if (port_id_is_invalid(port_id))
> >  		return;
> > -	for (vlan_id = 0; vlan_id < 4096; vlan_id++)
> > -		rx_vft_set(port_id, vlan_id, on);
> > +	for (vlan_id = 0; vlan_id < 4096; vlan_id++)	{
> 
> Before "{" you use a Tab? One white space is OK.
> 
> Thanks,
> Michael
> 
> > +		if (rx_vft_set(port_id, vlan_id, on))
> > +			break;
> > +	}
> >  }
> >
> >  void
> > diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> > index 8f5e6c7..e0186b9 100644
> > --- a/app/test-pmd/testpmd.h
> > +++ b/app/test-pmd/testpmd.h
> > @@ -492,7 +492,7 @@ void rx_vlan_strip_set_on_queue(portid_t port_id,
> uint16_t queue_id, int on);
> >
> >  void rx_vlan_filter_set(portid_t port_id, int on);
> >  void rx_vlan_all_filter_set(portid_t port_id, int on);
> > -void rx_vft_set(portid_t port_id, uint16_t vlan_id, int on);
> > +int rx_vft_set(portid_t port_id, uint16_t vlan_id, int on);
> >  void vlan_extend_set(portid_t port_id, int on);
> >  void vlan_tpid_set(portid_t port_id, uint16_t tp_id);
> >  void tx_vlan_set(portid_t port_id, uint16_t vlan_id);
> > diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> > index ea3a1fb..064b5d6 100644
> > --- a/lib/librte_ether/rte_ethdev.c
> > +++ b/lib/librte_ether/rte_ethdev.c
> > @@ -1519,8 +1519,8 @@ rte_eth_dev_vlan_filter(uint8_t port_id,
> uint16_t vlan_id, int on)
> >  		return (-EINVAL);
> >  	}
> >  	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_filter_set, -
> ENOTSUP);
> > -	(*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
> > -	return (0);
> > +
> > +	return (*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
> >  }
> >
> >  int



More information about the dev mailing list