[dpdk-dev] Intel X552/557 is not working.

[Masafumi OE]

Hi,

I'm trying to use X552/X557-AT 10GBASE-T NIC on Xeon-D 1540. However it did
not work properly.
Binding X552/557to PMD for ixgbe is fine but testpmd is not working on
X552/557 because th_ixgbe_dev_init() return Hardware Initialization
Failure:-3.

Do you have any idea?

--
Supermicro X10SDV-TLN4F
Running on CentOS 7.0:
DPDK is getting via git.
--
$ lspci -nn | grep X55
03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection
X552/X557-AT 10GBASE-T [8086:15ad]
03:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Connection
X552/X557-AT 10GBASE-T [8086:15ad]

$ ./dpdk_nic_bind.py  --status

Network devices using DPDK-compatible driver
============================================
0000:03:00.0 'Ethernet Connection X552/X557-AT 10GBASE-T'
drv=uio_pci_generic unused=vfio-pci
0000:03:00.1 'Ethernet Connection X552/X557-AT 10GBASE-T'
drv=uio_pci_generic unused=vfio-pci

Network devices using kernel driver
===================================
0000:05:00.0 'I350 Gigabit Network Connection' if=eno1 drv=igb
unused=vfio-pci,uio_pci_generic *Active*
0000:05:00.1 'I350 Gigabit Network Connection' if=eno2 drv=igb
unused=vfio-pci,uio_pci_generic

Other network devices
=====================
<none>

--
$ sudo -s app/testpmd -c 300 -n 4 -- -i --burst=32 --rxfreet=32
--mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32
--txqflags=0xf01
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 1 on socket 0
EAL: Detected lcore 10 as core 2 on socket 0
EAL: Detected lcore 11 as core 3 on socket 0
EAL: Detected lcore 12 as core 4 on socket 0
EAL: Detected lcore 13 as core 5 on socket 0
EAL: Detected lcore 14 as core 6 on socket 0
EAL: Detected lcore 15 as core 7 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 16 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Setting up memory...
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ff893200000 (size = 0x200000)
EAL: Ask a virtual area of 0xc00000 bytes
EAL: Virtual area found at 0x7ff892400000 (size = 0xc00000)
EAL: Ask a virtual area of 0x7000000 bytes
EAL: Virtual area found at 0x7ff88b200000 (size = 0x7000000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ff88ae00000 (size = 0x200000)
EAL: Requesting 64 pages of size 2MB from socket 0
^NEAL: TSC frequency is ~2000000 KHz
EAL: Master lcore 8 is ready (tid=9472d900;cpuset=[8])
EAL: lcore 9 is ready (tid=8a5fe700;cpuset=[9])
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL:   probe driver: 8086:15ad rte_ixgbe_pmd
EAL:   PCI memory mapped at 0x7ff893000000
EAL:   PCI memory mapped at 0x7ff8946f3000
PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -3
EAL: Error - exiting with code: 1
  Cause: Requested device 0000:03:00.0 cannot be used

--
Masafumi OE, NAOJ