[dpdk-dev] [PATCH v8 03/18] mbuf: add definitions of unified packet types

Helin Zhang helin.zhang at intel.com
Tue Jun 23 03:50:20 CEST 2015


As there are only 6 bit flags in ol_flags for indicating packet
types, which is not enough to describe all the possible packet
types hardware can recognize. For example, i40e hardware can
recognize more than 150 packet types. Unified packet type is
composed of L2 type, L3 type, L4 type, tunnel type, inner L2 type,
inner L3 type and inner L4 type fields, and can be stored in
'struct rte_mbuf' of 32 bits field 'packet_type'.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI, which is disabled by default.

Signed-off-by: Helin Zhang <helin.zhang at intel.com>
---
 lib/librte_mbuf/rte_mbuf.h | 487 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 487 insertions(+)

v3 changes:
* Put the definitions of unified packet type into a single patch.

v4 changes:
* Added detailed description of each packet types.

v5 changes:
* Re-worded the commit logs.
* Added more detailed description for all packet types, together with examples.

v6 changes:
* Disabled the code changes for unified packet type by default, to
  avoid breaking ABI compatibility.

v7 changes:
* Renamed RTE_UNIFIED_PKT_TYPE to RTE_NEXT_ABI.

diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 0315561..0ee0c55 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -201,6 +201,493 @@ extern "C" {
 /* Use final bit of flags to indicate a control mbuf */
 #define CTRL_MBUF_FLAG       (1ULL << 63) /**< Mbuf contains control data */
 
+#ifdef RTE_NEXT_ABI
+/*
+ * 32 bits are divided into several fields to mark packet types. Note that
+ * each field is indexical.
+ * - Bit 3:0 is for L2 types.
+ * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types.
+ * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types.
+ * - Bit 15:12 is for tunnel types.
+ * - Bit 19:16 is for inner L2 types.
+ * - Bit 23:20 is for inner L3 types.
+ * - Bit 27:24 is for inner L4 types.
+ * - Bit 31:28 is reserved.
+ *
+ * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT,
+ * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP
+ * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits.
+ *
+ * Note that L3 types values are selected for checking IPV4/IPV6 header from
+ * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and
+ * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values.
+ *
+ * Note that the packet types of the same packet recognized by different
+ * hardware may be different, as different hardware may have different
+ * capability of packet type recognition.
+ *
+ * examples:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=0x29
+ * | 'version'=6, 'next header'=0x3A
+ * | 'ICMPv6 header'>
+ * will be recognized on i40e hardware as packet type combination of,
+ * RTE_PTYPE_L2_MAC |
+ * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
+ * RTE_PTYPE_TUNNEL_IP |
+ * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_INNER_L4_ICMP.
+ *
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x2F
+ * | 'GRE header'
+ * | 'version'=6, 'next header'=0x11
+ * | 'UDP header'>
+ * will be recognized on i40e hardware as packet type combination of,
+ * RTE_PTYPE_L2_MAC |
+ * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_TUNNEL_GRENAT |
+ * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_INNER_L4_UDP.
+ */
+#define RTE_PTYPE_UNKNOWN                   0x00000000
+/**
+ * MAC (Media Access Control) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=[0x0800|0x86DD|others]>
+ */
+#define RTE_PTYPE_L2_MAC                    0x00000001
+/**
+ * MAC (Media Access Control) packet type for time sync.
+ *
+ * Packet format:
+ * <'ether type'=0x88F7>
+ */
+#define RTE_PTYPE_L2_MAC_TIMESYNC           0x00000002
+/**
+ * ARP (Address Resolution Protocol) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0806>
+ */
+#define RTE_PTYPE_L2_ARP                    0x00000003
+/**
+ * LLDP (Link Layer Discovery Protocol) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x88CC>
+ */
+#define RTE_PTYPE_L2_LLDP                   0x00000004
+/**
+ * Mask of layer 2 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L2_MASK                   0x0000000f
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and does not contain any
+ * header option.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=5>
+ */
+#define RTE_PTYPE_L3_IPV4                   0x00000010
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and contains header
+ * options.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[6-15], 'options'>
+ */
+#define RTE_PTYPE_L3_IPV4_EXT               0x00000030
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and does not contain any
+ * extension header.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x3B>
+ */
+#define RTE_PTYPE_L3_IPV6                   0x00000040
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and may or maynot contain
+ * header options.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[5-15], <'options'>>
+ */
+#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN       0x00000090
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and contains extension
+ * headers.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ *   'extension headers'>
+ */
+#define RTE_PTYPE_L3_IPV6_EXT               0x000000c0
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and may or maynot contain
+ * extension headers.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ *   <'extension headers'>>
+ */
+#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN       0x000000e0
+/**
+ * Mask of layer 3 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L3_MASK                   0x000000f0
+/**
+ * TCP (Transmission Control Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=6, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=6>
+ */
+#define RTE_PTYPE_L4_TCP                    0x00000100
+/**
+ * UDP (User Datagram Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17>
+ */
+#define RTE_PTYPE_L4_UDP                    0x00000200
+/**
+ * Fragmented IP (Internet Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * It refers to those packets of any IP types, which can be recognized as
+ * fragmented. A fragmented packet cannot be recognized as any other L4 types
+ * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP,
+ * RTE_PTYPE_L4_NONFRAG).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'MF'=1>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=44>
+ */
+#define RTE_PTYPE_L4_FRAG                   0x00000300
+/**
+ * SCTP (Stream Control Transmission Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=132, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=132>
+ */
+#define RTE_PTYPE_L4_SCTP                   0x00000400
+/**
+ * ICMP (Internet Control Message Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=1, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=1>
+ */
+#define RTE_PTYPE_L4_ICMP                   0x00000500
+/**
+ * Non-fragmented IP (Internet Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * It refers to those packets of any IP types, while cannot be recognized as
+ * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP,
+ * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'!=[6|17|44|132|1]>
+ */
+#define RTE_PTYPE_L4_NONFRAG                0x00000600
+/**
+ * Mask of layer 4 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L4_MASK                   0x00000f00
+/**
+ * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=[4|41]>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[4|41]>
+ */
+#define RTE_PTYPE_TUNNEL_IP                 0x00001000
+/**
+ * GRE (Generic Routing Encapsulation) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=47>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=47>
+ */
+#define RTE_PTYPE_TUNNEL_GRE                0x00002000
+/**
+ * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=4798>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=4798>
+ */
+#define RTE_PTYPE_TUNNEL_VXLAN              0x00003000
+/**
+ * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling
+ * packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=47
+ * | 'protocol type'=0x6558>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=47
+ * | 'protocol type'=0x6558'>
+ */
+#define RTE_PTYPE_TUNNEL_NVGRE              0x00004000
+/**
+ * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=6081>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=6081>
+ */
+#define RTE_PTYPE_TUNNEL_GENEVE             0x00005000
+/**
+ * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area
+ * Network) or GRE (Generic Routing Encapsulation) could be recognized as this
+ * packet type, if they can not be recognized independently as of hardware
+ * capability.
+ */
+#define RTE_PTYPE_TUNNEL_GRENAT             0x00006000
+/**
+ * Mask of tunneling packet types.
+ */
+#define RTE_PTYPE_TUNNEL_MASK               0x0000f000
+/**
+ * MAC (Media Access Control) packet type.
+ * It is used for inner packet type only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=[0x800|0x86DD]>
+ */
+#define RTE_PTYPE_INNER_L2_MAC              0x00010000
+/**
+ * MAC (Media Access Control) packet type with VLAN (Virtual Local Area
+ * Network) tag.
+ *
+ * Packet format (inner only):
+ * <'ether type'=[0x800|0x86DD], vlan=[1-4095]>
+ */
+#define RTE_PTYPE_INNER_L2_MAC_VLAN         0x00020000
+/**
+ * Mask of inner layer 2 packet types.
+ */
+#define RTE_PTYPE_INNER_L2_MASK             0x000f0000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and does not contain any header option.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=5>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4             0x00100000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and contains header options.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[6-15], 'options'>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4_EXT         0x00200000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and does not contain any extension header.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x3B>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6             0x00300000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and may or maynot contain header options.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[5-15], <'options'>>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and contains extension headers.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ *   'extension headers'>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6_EXT         0x00500000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and may or maynot contain extension
+ * headers.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ *   <'extension headers'>>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000
+/**
+ * Mask of inner layer 3 packet types.
+ */
+#define RTE_PTYPE_INNER_INNER_L3_MASK       0x00f00000
+/**
+ * TCP (Transmission Control Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=6, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=6>
+ */
+#define RTE_PTYPE_INNER_L4_TCP              0x01000000
+/**
+ * UDP (User Datagram Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17>
+ */
+#define RTE_PTYPE_INNER_L4_UDP              0x02000000
+/**
+ * Fragmented IP (Internet Protocol) packet type.
+ * It is used for inner packet only, and may or maynot have layer 4 packet.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'MF'=1>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=44>
+ */
+#define RTE_PTYPE_INNER_L4_FRAG             0x03000000
+/**
+ * SCTP (Stream Control Transmission Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=132, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=132>
+ */
+#define RTE_PTYPE_INNER_L4_SCTP             0x04000000
+/**
+ * ICMP (Internet Control Message Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=1, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=1>
+ */
+#define RTE_PTYPE_INNER_L4_ICMP             0x05000000
+/**
+ * Non-fragmented IP (Internet Protocol) packet type.
+ * It is used for inner packet only, and may or maynot have other unknown layer
+ * 4 packet types.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'!=[6|17|44|132|1]>
+ */
+#define RTE_PTYPE_INNER_L4_NONFRAG          0x06000000
+/**
+ * Mask of inner layer 4 packet types.
+ */
+#define RTE_PTYPE_INNER_L4_MASK             0x0f000000
+
+/**
+ * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
+ * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can
+ * determin if it is an IPV4 packet.
+ */
+#define  RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4)
+
+/**
+ * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
+ * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can
+ * determin if it is an IPV4 packet.
+ */
+#define  RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6)
+
+/* Check if it is a tunneling packet */
+#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & RTE_PTYPE_TUNNEL_MASK)
+#endif /* RTE_NEXT_ABI */
+
 /**
  * Get the name of a RX offload flag
  *
-- 
1.9.3



More information about the dev mailing list