[dpdk-dev] [PATCH v5 2/2] app/testpmd: add test commands for selecting different GRE key sizes

Helin Zhang helin.zhang at intel.com
Mon Nov 2 16:07:49 CET 2015


Test commands are added to support selecting differnt length of GRE key.

Signed-off-by: Helin Zhang <helin.zhang at intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin at intel.com>
---
 app/test-pmd/cmdline.c                      | 52 +++++++++++++++++++++++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 11 ++++++
 2 files changed, 63 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 6a384a2..1018379 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -6739,6 +6739,57 @@ cmdline_parse_inst_t cmd_tunnel_udp_config = {
 	},
 };
 
+/* *** GLOBAL CONFIG *** */
+struct cmd_global_config_result {
+	cmdline_fixed_string_t cmd;
+	uint8_t port_id;
+	cmdline_fixed_string_t cfg_type;
+	uint8_t len;
+};
+
+static void
+cmd_global_config_parsed(void *parsed_result,
+			 __attribute__((unused)) struct cmdline *cl,
+			 __attribute__((unused)) void *data)
+{
+	struct cmd_global_config_result *res = parsed_result;
+	struct rte_eth_global_cfg conf;
+	int ret;
+
+	memset(&conf, 0, sizeof(conf));
+	conf.cfg_type = RTE_ETH_GLOBAL_CFG_TYPE_GRE_KEY_LEN;
+	conf.cfg.gre_key_len = res->len;
+	ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_NONE,
+				      RTE_ETH_FILTER_SET, &conf);
+	if (ret != 0)
+		printf("Global config error\n");
+}
+
+cmdline_parse_token_string_t cmd_global_config_cmd =
+	TOKEN_STRING_INITIALIZER(struct cmd_global_config_result, cmd,
+		"global_config");
+cmdline_parse_token_num_t cmd_global_config_port_id =
+	TOKEN_NUM_INITIALIZER(struct cmd_global_config_result, port_id, UINT8);
+cmdline_parse_token_string_t cmd_global_config_type =
+	TOKEN_STRING_INITIALIZER(struct cmd_global_config_result,
+		cfg_type, "gre-key-len");
+cmdline_parse_token_num_t cmd_global_config_gre_key_len =
+	TOKEN_NUM_INITIALIZER(struct cmd_global_config_result,
+		len, UINT8);
+
+cmdline_parse_inst_t cmd_global_config = {
+	.f = cmd_global_config_parsed,
+	.data = (void *)NULL,
+	.help_str = "global_config <port_id> gre-key-len <number>",
+	.tokens = {
+		(void *)&cmd_global_config_cmd,
+		(void *)&cmd_global_config_port_id,
+		(void *)&cmd_global_config_type,
+		(void *)&cmd_global_config_gre_key_len,
+		NULL,
+	},
+};
+
 /* *** CONFIGURE VM MIRROR VLAN/POOL RULE *** */
 struct cmd_set_mirror_mask_result {
 	cmdline_fixed_string_t set;
@@ -9579,6 +9630,7 @@ cmdline_parse_ctx_t main_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_vf_rate_limit,
 	(cmdline_parse_inst_t *)&cmd_tunnel_filter,
 	(cmdline_parse_inst_t *)&cmd_tunnel_udp_config,
+	(cmdline_parse_inst_t *)&cmd_global_config,
 	(cmdline_parse_inst_t *)&cmd_set_mirror_mask,
 	(cmdline_parse_inst_t *)&cmd_set_mirror_link,
 	(cmdline_parse_inst_t *)&cmd_reset_mirror_rule,
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 75b0a57..957f889 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1812,3 +1812,14 @@ Set the input set for Fdir::
 For example to add source IP to FD input set for flow type of ipv4 on port 0::
 
    testpmd> set_fdir_input_set 0 ipv4 src-ipv4 add
+
+global_config
+~~~~~~~~~~~~~
+
+Set different GRE key length for input set::
+
+   global_config (port_id) gre-key-len (number in bytes)
+
+For example to set GRE key length for input set to 4 bytes on port 0::
+
+   testpmd> global_config 0 gre-key-len 4
-- 
1.9.3



More information about the dev mailing list