[dpdk-dev] DPDK ArmV7 autotests

Jan Viktorin viktorin at rehivetech.com
Mon Nov 9 18:46:34 CET 2015


Here is the log. You an see, that many tests fail just because
of the missing hugetlb support. This is strange as I modified the
autotest_runner.py to inject "--no-huge --no-pci" options when it
detects armv7 architecture.

Moreover, the mempool performance test does not say OK. It is marked as
Timeout in the CSV.


Summary
Target:        armv7l-unknown-4.2.0
Tests:         52
Failed tests:  27

==================== group_1

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: TSC frequency is ~999784 KHz
EAL: Master lcore 0 is ready (tid=76f89000;cpuset=[0])
EAL: lcore 1 is ready (tid=75bc82c0;cpuset=[1])
EAL: lcore 3 is ready (tid=74bc82c0;cpuset=[3])
EAL: lcore 2 is ready (tid=753c82c0;cpuset=[2])
APP: HPET is not enabled, using TSC as default timer

-------------------- Timer autotest
Test OK
Test OK

-------------------- Debug autotest
Test OK

-------------------- Errno autotest
Test OK

-------------------- Meter autotest
Test OK

-------------------- Common autotest
Test OK

-------------------- Dump log history

dump_log_history

-------------------- Dump rings

dump_ring

-------------------- Dump mempools

dump_mempool

==================== group_2

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...

EAL: TSC frequency is ~999984 KHz
EAL: Master lcore 0 is ready (tid=76f23000;cpuset=[0])
EAL: lcore 1 is ready (tid=723622c0;cpuset=[1])
EAL: lcore 2 is ready (tid=71b622c0;cpuset=[2])
EAL: lcore 3 is ready (tid=713622c0;cpuset=[3])
APP: HPET is not enabled, using TSC as default timer

-------------------- Memory autotest
Test OK

-------------------- Read/write lock autotest
Test OK

-------------------- Logs autotest
Test OK

-------------------- CPU flags autotest
Test OK

-------------------- Version autotest
Test OK

-------------------- EAL filesystem autotest
Test OK

-------------------- EAL flags autotest

eal_flags_autotest
eal_flags_autotest
Running binary with argv[]:'/usr/dpdk/test' '--file-prefix=uxv' '--proc-type=secondary' '-n' '3' 
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
PANIC in rte_eal_config_attach():
Cannot open '/var/run/.uxv_config' for rte_mem_config
Error - process did not run ok when missing -c flag
Error in test_missing_c_flag()
Test Failed

-------------------- Hash autotest

hash_autotest
hash_autotest
# Testing hash creation with invalid parameters - expect error msgs
ERROR line 795: fbk hash creation should have failed
Test Failed

==================== group_3

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== group_4

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: TSC frequency is ~999942 KHz
EAL: Master lcore 0 is ready (tid=76f18000;cpuset=[0])
EAL: lcore 1 is ready (tid=6e3572c0;cpuset=[1])
EAL: lcore 2 is ready (tid=6db572c0;cpuset=[2])
EAL: lcore 3 is ready (tid=6d3572c0;cpuset=[3])
APP: HPET is not enabled, using TSC as default timer

-------------------- PCI autotest

pci_autotest
pci_autotest
Dump all devices
Scan bus
no device detected
Test Failed

-------------------- Malloc autotest
Test OK

-------------------- Multi-process autotest

multiprocess_autotest
multiprocess_autotest
=== Running pre-requisite test of test_pci
Dump all devices
Scan bus
no device detected
=== Requisite test done
Running binary with argv[]:'/usr/dpdk/test' '-c' '1' '--proc-type=secondary' '--file-prefix=uxv' 
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
PANIC in rte_eal_config_attach():
Cannot open '/var/run/.uxv_config' for rte_mem_config
Running binary with argv[]:'/usr/dpdk/test' '-c' '1' '--proc-type=auto' '--file-prefix=uxv' 
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Auto-detected process type: PRIMARY
PANIC in eal_hugepage_info_init():
Cannot open directory /sys/kernel/mm/hugepages to read system hugepage info
Running binary with argv[]:'/usr/dpdk/test' '-c' '1' '--proc-type=ERROR' '--file-prefix=uxv' 
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Invalid process type specified

Usage: /usr/dpdk/test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  --master-lcore ID   Core ID that is used as master
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --pci-blacklist Add a PCI device in black list.
                      Prevent EAL from using this PCI device. The argument
                      format is <domain:bus:devid.func>.
  -w, --pci-whitelist Add a PCI device in white list.
                      Only use the specified PCI devices. The argument format
                      is <[domain:]bus:devid.func>. This option can be present
                      several times (once per device).
                      [NOTE: PCI whitelist cannot be used with -b option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=eth_pcap0,iface=eth2).
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level         Set default log level
  -v                  Display version information on startup
  -h, --help          This help

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  -d LIB.so           Add driver (can be used multiple times)
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --base-virtaddr     Base virtual address
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --xen-dom0          Support running on Xen dom0 without hugetlbfs

Running binary with argv[]:'/usr/dpdk/test' '-c' '1' '--proc-type=secondary' '--file-prefix=ERROR' 
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
PANIC in rte_eal_config_attach():
Cannot open '/var/run/.ERROR_config' for rte_mem_config
Test Failed

-------------------- Mbuf autotest
Test OK

-------------------- Per-lcore autotest
Test OK

-------------------- Ring autotest
Test OK

==================== group_5
Test OK

-------------------- Byte order autotest
Test OK

-------------------- TAILQ autotest
Test OK

-------------------- Command-line autotest
Test OK

-------------------- Interrupts autotest
Test OK

==================== group_6


EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== group_7


EAL: Detected lcore 0 as core 0 on socket 0

EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: TSC frequency is ~999972 KHz
EAL: Master lcore 0 is ready (tid=76fc1000;cpuset=[0])
EAL: lcore 1 is ready (tid=5d4002c0;cpuset=[1])
EAL: lcore 2 is ready (tid=5cc002c0;cpuset=[2])
EAL: lcore 3 is ready (tid=5c4002c0;cpuset=[3])
APP: HPET is not enabled, using TSC as default timer

-------------------- PMD ring autotest

ring_pmd_autotest
ring_pmd_autotest
Configure failed for TX port
Test Failed

-------------------- Access list control autotest

acl_autotest
acl_autotest
Command not found

-------------------- Sched autotest
Test OK

==================== kni

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== mempool_perf

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...

EAL: TSC frequency is ~999968 KHz
EAL: Master lcore 0 is ready (tid=76fa1000;cpuset=[0])
EAL: lcore 1 is ready (tid=663e02c0;cpuset=[1])
EAL: lcore 2 is ready (tid=65be02c0;cpuset=[2])
EAL: lcore 3 is ready (tid=653e02c0;cpuset=[3])
APP: HPET is not enabled, using TSC as default timer

-------------------- Cycles autotest
Test OK

-------------------- Mempool performance autotest

mempool_perf_autotest
mempool_perf_autotest
start performance test (without cache)
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=1 n_keep=32 rate_persec=1481113
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=1 n_keep=128 rate_persec=1114112
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=4 n_keep=32 rate_persec=1900544
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=4 n_keep=128 rate_persec=2883584
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=32 n_keep=32 rate_persec=3748659
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=32 n_keep=128 rate_persec=3040870
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=1 n_keep=32 rate_persec=2398617
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=1 n_keep=128 rate_persec=2555904
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=4 n_keep=32 rate_persec=8296857
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=4 n_keep=128 rate_persec=7208960
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=32 n_keep=32 rate_persec=9502720
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=32 n_keep=128 rate_persec=9673113
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=1 n_keep=32 rate_persec=2411724
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=1 n_keep=128 rate_persec=2673868
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=4 n_keep=32 rate_persec=15741747
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=4 n_keep=128 rate_persec=16960716
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=32 n_keep=32 rate_persec=32597606
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=32 n_keep=128 rate_persec=25493504
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=1 n_keep=32 rate_persec=26214
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=1 n_keep=128 rate_persec=39321
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=4 n_keep=32 rate_persec=39321
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=4 n_keep=128 rate_persec=65535
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=32 n_keep=32 rate_persec=78642
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=32 n_keep=128 rate_persec=104856
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=1 n_keep=32 rate_persec=52428
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=1 n_keep=128 rate_persec=26214
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=4 n_keep=32 rate_persec=104857
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=4 n_keep=128 rate_persec=52428
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=32 n_keep=32 rate_persec=235928
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=32 n_keep=128 rate_persec=117964
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=1 n_keep=32 rate_persec=52428
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=1 n_keep=128 rate_persec=39321
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=4 n_keep=32 rate_persec=262144
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=4 n_keep=128 rate_persec=117964
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=32 n_keep=32 rate_persec=471858
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=32 n_keep=128 rate_persec=262143

==================== memcpy_perf

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== hash_perf

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...

EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== power

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== power_acpi_cpufreq

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0

EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== power_kvm_vm

EAL: Detected lcore 0 as core 0 on socket 0

EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== lpm6

EAL: Detected lcore 0 as core 0 on socket 0

EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== timer_perf

EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0

EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

==================== ring_perf

EAL: Detected lcore 0 as core 0 on socket 0

EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory

Regards
Jan

On Mon, 9 Nov 2015 17:26:21 +0000
"Hunt, David" <david.hunt at intel.com> wrote:

> On 09/11/2015 17:12, Jan Viktorin wrote:
> > Hello David,
> >
> > I am working on some auto test in QEMU. My last result for ARMv7 is
> > following bellow. What is strange, I could see that the read/write lock
> > autotest failed (wrong order) before.
> >
> > I have no idea what does it mean "no prompt". I suppose that such test
> > could not be run for some reason...  
> 
> The no prompt occurs when the 'test' binary (which is used to run each 
> autotest in turn) exits before it gets to the prompt, so the test cannot 
> be run. Usually this is because of lack of resources such as memory, PCI 
> or similar. I had to reduce the memory requirements from 1024M to 512M 
> to get one section of tests to pass (in autotest_data.py).
> 
> For more information on why the autotests are failing, you can check the 
> log file in the directory for that autotest run -
> arm-armv7a-linux-app-gcc/autotest-date/arm-armv7a-linuxapp-gcc.log
> 
> 
> >
> > I had to slightly modify the autotest.py to run properly.
> >
> > The test was executed in qemu:
> >
> >   qemu-system-arm -M vexpress-a9 -kernel zImage \
> >      -dtb vexpress-v2p-ca9.dtb -drive file=rootfs.ext2,if=sd \
> >      -append "console=ttyAMA0 root=/dev/mmcblk0 rw" -smp 4 -m 512 -nographic
> >
> > with the Linux Kernel 4.2.
> >
> >
> > Test name                      Test result                      Test     Total
> > ================================================================================
> > Bits 55-60 of /proc/PID/pagemap entries are about to stop being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt for details.
> >
> > Start group_1:                 Success                       [00m 08s]
> > Timer autotest:                Success                       [00m 52s]
> > Debug autotest:                Success                       [00m 01s]
> > Errno autotest:                Success                       [00m 00s]
> > Meter autotest:                Success                       [00m 01s]
> > Common autotest:               Success                       [00m 28s]
> > Dump log history:              Success                       [00m 00s]
> > Dump rings:                    Success                       [00m 00s]
> > Dump mempools:                 Success                       [00m 00s] [01m 34s]
> > Start group_2:                 Success                       [00m 00s]
> > Memory autotest:               Success                       [00m 01s]
> > Read/write lock autotest:      Success                       [00m 00s]
> > Logs autotest:                 Success                       [00m 00s]
> > CPU flags autotest:            Success                       [00m 00s]
> > Version autotest:              Success                       [00m 00s]
> > EAL filesystem autotest:       Success                       [00m 00s]
> > EAL flags autotest:            Fail                          [00m 00s]
> > Hash autotest:                 Fail                          [00m 00s] [01m 38s]
> > Start group_3:                 Fail [No prompt]              [00m 00s]
> > LPM autotest:                  Fail [No prompt]              [00m 00s]
> > IVSHMEM autotest:              Fail [No prompt]              [00m 00s]
> > Memcpy autotest:               Fail [No prompt]              [00m 00s]
> > Memzone autotest:              Fail [No prompt]              [00m 00s]
> > String autotest:               Fail [No prompt]              [00m 00s]
> > Alarm autotest:                Fail [No prompt]              [00m 00s] [01m 39s]
> > Start group_4:                 Success                       [00m 00s]
> > PCI autotest:                  Fail                          [00m 00s]
> > Malloc autotest:               Success                       [00m 12s]
> > Multi-process autotest:        Fail                          [00m 01s]
> > Mbuf autotest:                 Success                       [02m 18s]
> > Per-lcore autotest:            Success                       [00m 05s]
> > Ring autotest:                 Success                       [00m 02s] [04m 19s]
> > Start group_5:                 Success                       [00m 00s]
> > Spinlock autotest:             Success                       [00m 15s]
> > Byte order autotest:           Success                       [00m 00s]
> > TAILQ autotest:                Success                       [00m 00s]
> > Command-line autotest:         Success                       [00m 00s]
> > Interrupts autotest:           Success                       [00m 08s] [04m 45s]
> > Start group_6:                 Fail [No prompt]              [00m 00s]
> > Function reentrancy autotest:  Fail [No prompt]              [00m 00s]
> > Mempool autotest:              Fail [No prompt]              [00m 00s]
> > Atomics autotest:              Fail [No prompt]              [00m 00s]
> > Prefetch autotest:             Fail [No prompt]              [00m 00s]
> > Red autotest:                  Fail [No prompt]              [00m 00s] [04m 45s]
> > Start group_7:                 Success                       [00m 00s]
> > PMD ring autotest:             Fail                          [00m 00s]
> > Access list control autotest:  Fail [Not found]              [00m 00s]
> > Sched autotest:                Success                       [00m 00s] [04m 48s]
> > Start kni:                     Fail [No prompt]              [00m 00s]
> > KNI autotest:                  Fail [No prompt]              [00m 00s] [04m 48s]
> > Start mempool_perf:            Success                       [00m 00s]
> > Cycles autotest:               Success                       [00m 01s]
> > Mempool performance autotest:  Fail [Timeout]                [15m 00s] [19m 50s]
> > Start memcpy_perf:             Fail [No prompt]              [00m 00s]
> > Memcpy performance autotest:   Fail [No prompt]              [00m 00s] [19m 50s]
> > Start hash_perf:               Fail [No prompt]              [00m 00s]
> > Hash performance autotest:     Fail [No prompt]              [00m 00s] [19m 51s]
> > Start power:                   Fail [No prompt]              [00m 00s]
> > Power autotest:                Fail [No prompt]              [00m 00s] [19m 51s]
> > Start power_acpi_cpufreq:      Fail [No prompt]              [00m 00s]
> > Power ACPI cpufreq autotest:   Fail [No prompt]              [00m 00s] [19m 52s]
> > Start power_kvm_vm:            Fail [No prompt]              [00m 00s]
> > Power KVM VM  autotest:        Fail [No prompt]              [00m 00s] [19m 52s]
> > Start lpm6:                    Fail [No prompt]              [00m 00s]
> > LPM6 autotest:                 Fail [No prompt]              [00m 00s] [19m 52s]
> > Start timer_perf:              Fail [No prompt]              [00m 00s]
> > Timer performance autotest:    Fail [No prompt]              [00m 00s] [19m 53s]
> > Start ring_perf:               Fail [No prompt]              [00m 00s]
> > Ring performance autotest:     Fail [No prompt]              [00m 00s] [19m 53s]
> > ================================================================================
> > Total run time: 19m 53s
> > Number of failed tests: 27
> > =============================
> >
> > Regards
> > Jan
> >
> > On Mon, 9 Nov 2015 16:35:34 +0000
> > "Hunt, David" <david.hunt at intel.com> wrote:
> >  
> >> Jan,
> >>      I'm running some of the autotests, and I've got the following
> >> passes/fails. Have you run any of the failing tests on your platform? Do
> >> they pass?
> >> Dave.
> >>
> >> dpdk# make -C arm-armv7a-linuxapp-gcc fast_test
> >> Test name                      Test result       Test     Total
> >> =================================================================
> >> Timer autotest:                Success           [00m 42s]
> >> Debug autotest:                Success           [00m 00s]
> >> Errno autotest:                Success           [00m 00s]
> >> Meter autotest:                Success           [00m 00s]
> >> Common autotest:               Success           [00m 03s]
> >> Dump log history:              Success           [00m 00s]
> >> Dump rings:                    Success           [00m 00s]
> >> Dump mempools:                 Success           [00m 00s] [00m 50s]
> >> Memory autotest:               Success           [00m 00s]
> >> Read/write lock autotest:      Success           [00m 00s]
> >> Logs autotest:                 Success           [00m 00s]
> >> CPU flags autotest:            Success           [00m 00s]
> >> Version autotest:              Success           [00m 00s]
> >> EAL filesystem autotest:       Success           [00m 00s]
> >> EAL flags autotest:            Fail [Broken Test]
> >> Hash autotest:                 Fail              [00m 00s] [00m 53s]
> >> LPM autotest:                  Fail [Not found]  [00m 00s]
> >> IVSHMEM autotest:              Fail [Not found]  [00m 00s]
> >> Memcpy autotest:               Success           [00m 51s]
> >> Memzone autotest:              Fail              [00m 00s]
> >> String autotest:               Success           [00m 00s]
> >> Alarm autotest:                Success           [00m 16s] [02m 03s]
> >> PCI autotest:                  Fail [No PCI present]
> >> Malloc autotest:               Success           [00m 04s]
> >> Multi-process autotest:        Fail [No PCI present]
> >> Mbuf autotest:                 Success           [01m 00s]
> >> Per-lcore autotest:            Success           [00m 05s]
> >> Ring autotest:                 Success           [00m 02s] [03m 21s]
> >> Spinlock autotest:             Success           [00m 15s]
> >> Byte order autotest:           Success           [00m 00s]
> >> TAILQ autotest:                Success           [00m 00s]
> >> Command-line autotest:         Success           [00m 00s]
> >> Interrupts autotest:           Success           [00m 08s] [03m 48s]
> >> Function reentrancy autotest:  Success           [00m 00s]
> >> Mempool autotest:              Success (Manual Execution)
> >> Atomics autotest:              Success           [00m 00s]
> >> Prefetch autotest:             Success           [00m 00s]
> >> Red autotest:                  Success           [07m 22s] [11m 13s]
> >> PMD ring autotest:             N/A Needs port
> >> Sched autotest:                Success           [00m 00s] [11m 16s]
> >> Cycles autotest:               Success           [00m 01s] [11m 21s]
> >> Power autotest:                Success           [00m 00s] [11m 23s]
> >> Power ACPI cpufreq autotest:   Success           [00m 00s] [11m 25s]
> >> ====================================================================  
> >
> >
> >  
> 



-- 
   Jan Viktorin                  E-mail: Viktorin at RehiveTech.com
   System Architect              Web:    www.RehiveTech.com
   RehiveTech
   Brno, Czech Republic


More information about the dev mailing list