[dpdk-dev] [PATCH v2 02/10] ethdev: move the multi-queue checking to specific drivers
Jingjing Wu
jingjing.wu at intel.com
Thu Oct 29 09:53:39 CET 2015
Differnet NIC has its specific constraint on the multi-queue
configuration, so move the checking from ethdev lib to drivers.
Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
---
drivers/net/e1000/igb_ethdev.c | 84 ++++++++++++++++-
drivers/net/ixgbe/ixgbe_ethdev.c | 171 +++++++++++++++++++++++++++++++++
drivers/net/ixgbe/ixgbe_ethdev.h | 3 +
lib/librte_ether/rte_ethdev.c | 199 ---------------------------------------
4 files changed, 257 insertions(+), 200 deletions(-)
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index 848ef6e..d9c13d9 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -866,16 +866,98 @@ rte_igbvf_pmd_init(const char *name __rte_unused, const char *params __rte_unuse
}
static int
+igb_check_mq_mode(struct rte_eth_dev *dev)
+{
+ enum rte_eth_rx_mq_mode rx_mq_mode = dev->data->dev_conf.rxmode.mq_mode;
+ enum rte_eth_tx_mq_mode tx_mq_mode = dev->data->dev_conf.txmode.mq_mode;
+ uint16_t nb_rx_q = dev->data->nb_rx_queues;
+ uint16_t nb_tx_q = dev->data->nb_rx_queues;
+
+ if ((rx_mq_mode & ETH_MQ_RX_DCB_FLAG) ||
+ tx_mq_mode == ETH_MQ_TX_DCB ||
+ tx_mq_mode == ETH_MQ_TX_VMDQ_DCB) {
+ PMD_INIT_LOG(ERR, "DCB mode is not supported.");
+ return -EINVAL;
+ }
+ if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
+ /* Check multi-queue mode.
+ * To no break software we accept ETH_MQ_RX_NONE as this might
+ * be used to turn off VLAN filter.
+ */
+
+ if (rx_mq_mode == ETH_MQ_RX_NONE ||
+ rx_mq_mode == ETH_MQ_RX_VMDQ_ONLY) {
+ dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_ONLY;
+ RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
+ } else {
+ /* Only support one queue on VFs.
+ * RSS together with SRIOV is not supported.
+ */
+ PMD_INIT_LOG(ERR, "SRIOV is active,"
+ " wrong mq_mode rx %d.",
+ rx_mq_mode);
+ return -EINVAL;
+ }
+ /* TX mode is not used here, so mode might be ignored.*/
+ if (tx_mq_mode != ETH_MQ_TX_VMDQ_ONLY) {
+ /* SRIOV only works in VMDq enable mode */
+ PMD_INIT_LOG(WARNING, "SRIOV is active,"
+ " TX mode %d is not supported. "
+ " Driver will behave as %d mode.",
+ tx_mq_mode, ETH_MQ_TX_VMDQ_ONLY);
+ }
+
+ /* check valid queue number */
+ if ((nb_rx_q > 1) || (nb_tx_q > 1)) {
+ PMD_INIT_LOG(ERR, "SRIOV is active,"
+ " only support one queue on VFs.");
+ return -EINVAL;
+ }
+ } else {
+ /* To no break software that set invalid mode, only display
+ * warning if invalid mode is used.
+ */
+ if (rx_mq_mode != ETH_MQ_RX_NONE &&
+ rx_mq_mode != ETH_MQ_RX_VMDQ_ONLY &&
+ rx_mq_mode != ETH_MQ_RX_RSS) {
+ /* RSS together with VMDq not supported*/
+ PMD_INIT_LOG(ERR, "RX mode %d is not supported.",
+ rx_mq_mode);
+ return -EINVAL;
+ }
+
+ if (tx_mq_mode != ETH_MQ_TX_NONE &&
+ tx_mq_mode != ETH_MQ_TX_VMDQ_ONLY) {
+ PMD_INIT_LOG(WARNING, "TX mode %d is not supported."
+ " Due to txmode is meaningless in this"
+ " driver, just ignore.",
+ tx_mq_mode);
+ }
+ }
+ return 0;
+}
+
+static int
eth_igb_configure(struct rte_eth_dev *dev)
{
struct e1000_interrupt *intr =
E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+ int ret;
PMD_INIT_FUNC_TRACE();
+
+ /* multipe queue mode checking */
+ ret = igb_check_mq_mode(dev);
+ if (ret != 0) {
+ PMD_DRV_LOG(ERR, "igb_check_mq_mode fails with %d.",
+ ret);
+ return ret;
+ }
+
intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
PMD_INIT_FUNC_TRACE();
- return (0);
+ return 0;
}
static int
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index ec2918c..a7dca55 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -1636,14 +1636,185 @@ ixgbe_vmdq_vlan_hw_filter_enable(struct rte_eth_dev *dev)
}
static int
+ixgbe_check_vf_rss_rxq_num(struct rte_eth_dev *dev, uint16_t nb_rx_q)
+{
+ switch (nb_rx_q) {
+ case 1:
+ case 2:
+ RTE_ETH_DEV_SRIOV(dev).active = ETH_64_POOLS;
+ break;
+ case 4:
+ RTE_ETH_DEV_SRIOV(dev).active = ETH_32_POOLS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = nb_rx_q;
+ RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx = dev->pci_dev->max_vfs * nb_rx_q;
+
+ return 0;
+}
+
+static int
+ixgbe_check_mq_mode(struct rte_eth_dev *dev)
+{
+ struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
+ uint16_t nb_rx_q = dev->data->nb_rx_queues;
+ uint16_t nb_tx_q = dev->data->nb_rx_queues;
+
+ if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
+ /* check multi-queue mode */
+ switch (dev_conf->rxmode.mq_mode) {
+ case ETH_MQ_RX_VMDQ_DCB:
+ case ETH_MQ_RX_VMDQ_DCB_RSS:
+ /* DCB/RSS VMDQ in SRIOV mode, not implement yet */
+ PMD_INIT_LOG(ERR, "SRIOV active,"
+ " unsupported mq_mode rx %d.",
+ dev_conf->rxmode.mq_mode);
+ return -EINVAL;
+ case ETH_MQ_RX_RSS:
+ case ETH_MQ_RX_VMDQ_RSS:
+ dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
+ if (nb_rx_q <= RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)
+ if (ixgbe_check_vf_rss_rxq_num(dev, nb_rx_q)) {
+ PMD_INIT_LOG(ERR, "SRIOV is active,"
+ " invalid queue number"
+ " for VMDQ RSS, allowed"
+ " value are 1, 2 or 4.");
+ return -EINVAL;
+ }
+ break;
+ case ETH_MQ_RX_VMDQ_ONLY:
+ case ETH_MQ_RX_NONE:
+ /* if nothing mq mode configure, use default scheme */
+ dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_ONLY;
+ if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
+ RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
+ break;
+ default: /* ETH_MQ_RX_DCB, ETH_MQ_RX_DCB_RSS or ETH_MQ_TX_DCB*/
+ /* SRIOV only works in VMDq enable mode */
+ PMD_INIT_LOG(ERR, "SRIOV is active,"
+ " wrong mq_mode rx %d.",
+ dev_conf->rxmode.mq_mode);
+ return -EINVAL;
+ }
+
+ switch (dev_conf->txmode.mq_mode) {
+ case ETH_MQ_TX_VMDQ_DCB:
+ /* DCB VMDQ in SRIOV mode, not implement yet */
+ PMD_INIT_LOG(ERR, "SRIOV is active,"
+ " unsupported VMDQ mq_mode tx %d.",
+ dev_conf->txmode.mq_mode);
+ return -EINVAL;
+ default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */
+ dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_ONLY;
+ break;
+ }
+
+ /* check valid queue number */
+ if ((nb_rx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) ||
+ (nb_tx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)) {
+ PMD_INIT_LOG(ERR, "SRIOV is active,"
+ " queue number must less equal to %d.",
+ RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool);
+ return -EINVAL;
+ }
+ } else {
+ /* check configuration for vmdb+dcb mode */
+ if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB) {
+ const struct rte_eth_vmdq_dcb_conf *conf;
+
+ if (nb_rx_q != IXGBE_VMDQ_DCB_NB_QUEUES) {
+ PMD_INIT_LOG(ERR, "VMDQ+DCB, nb_rx_q != %d.",
+ IXGBE_VMDQ_DCB_NB_QUEUES);
+ return -EINVAL;
+ }
+ conf = &dev_conf->rx_adv_conf.vmdq_dcb_conf;
+ if (!(conf->nb_queue_pools == ETH_16_POOLS ||
+ conf->nb_queue_pools == ETH_32_POOLS)) {
+ PMD_INIT_LOG(ERR, "VMDQ+DCB selected,"
+ " nb_queue_pools must be %d or %d.",
+ ETH_16_POOLS, ETH_32_POOLS);
+ return -EINVAL;
+ }
+ }
+ if (dev_conf->txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB) {
+ const struct rte_eth_vmdq_dcb_tx_conf *conf;
+
+ if (nb_tx_q != IXGBE_VMDQ_DCB_NB_QUEUES) {
+ PMD_INIT_LOG(ERR, "VMDQ+DCB, nb_tx_q != %d",
+ IXGBE_VMDQ_DCB_NB_QUEUES);
+ return -EINVAL;
+ }
+ conf = &dev_conf->tx_adv_conf.vmdq_dcb_tx_conf;
+ if (!(conf->nb_queue_pools == ETH_16_POOLS ||
+ conf->nb_queue_pools == ETH_32_POOLS)) {
+ PMD_INIT_LOG(ERR, "VMDQ+DCB selected,"
+ " nb_queue_pools != %d and"
+ " nb_queue_pools != %d.",
+ ETH_16_POOLS, ETH_32_POOLS);
+ return -EINVAL;
+ }
+ }
+
+ /* For DCB mode check our configuration before we go further */
+ if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) {
+ const struct rte_eth_dcb_rx_conf *conf;
+
+ if (nb_rx_q != IXGBE_DCB_NB_QUEUES) {
+ PMD_INIT_LOG(ERR, "DCB selected, nb_rx_q != %d.",
+ IXGBE_DCB_NB_QUEUES);
+ return -EINVAL;
+ }
+ conf = &dev_conf->rx_adv_conf.dcb_rx_conf;
+ if (!(conf->nb_tcs == ETH_4_TCS ||
+ conf->nb_tcs == ETH_8_TCS)) {
+ PMD_INIT_LOG(ERR, "DCB selected, nb_tcs != %d"
+ " and nb_tcs != %d.",
+ ETH_4_TCS, ETH_8_TCS);
+ return -EINVAL;
+ }
+ }
+
+ if (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB) {
+ const struct rte_eth_dcb_tx_conf *conf;
+
+ if (nb_tx_q != IXGBE_DCB_NB_QUEUES) {
+ PMD_INIT_LOG(ERR, "DCB, nb_tx_q != %d.",
+ IXGBE_DCB_NB_QUEUES);
+ return -EINVAL;
+ }
+ conf = &dev_conf->tx_adv_conf.dcb_tx_conf;
+ if (!(conf->nb_tcs == ETH_4_TCS ||
+ conf->nb_tcs == ETH_8_TCS)) {
+ PMD_INIT_LOG(ERR, "DCB selected, nb_tcs != %d"
+ " and nb_tcs != %d.",
+ ETH_4_TCS, ETH_8_TCS);
+ return -EINVAL;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
ixgbe_dev_configure(struct rte_eth_dev *dev)
{
struct ixgbe_interrupt *intr =
IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
struct ixgbe_adapter *adapter =
(struct ixgbe_adapter *)dev->data->dev_private;
+ int ret;
PMD_INIT_FUNC_TRACE();
+ /* multipe queue mode checking */
+ ret = ixgbe_check_mq_mode(dev);
+ if (ret != 0) {
+ PMD_DRV_LOG(ERR, "ixgbe_check_mq_mode fails with %d.",
+ ret);
+ return ret;
+ }
/* set flag to update link status after init */
intr->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index c3d4f4f..240241a 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -57,6 +57,9 @@
#define IXGBE_VFTA_SIZE 128
#define IXGBE_VLAN_TAG_SIZE 4
#define IXGBE_MAX_RX_QUEUE_NUM 128
+#define IXGBE_VMDQ_DCB_NB_QUEUES IXGBE_MAX_RX_QUEUE_NUM
+#define IXGBE_DCB_NB_QUEUES IXGBE_MAX_RX_QUEUE_NUM
+
#ifndef NBBY
#define NBBY 8 /* number of bits in a byte */
#endif
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index f593f6e..c7247c3 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -880,197 +880,6 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
return 0;
}
-static int
-rte_eth_dev_check_vf_rss_rxq_num(uint8_t port_id, uint16_t nb_rx_q)
-{
- struct rte_eth_dev *dev = &rte_eth_devices[port_id];
-
- switch (nb_rx_q) {
- case 1:
- case 2:
- RTE_ETH_DEV_SRIOV(dev).active =
- ETH_64_POOLS;
- break;
- case 4:
- RTE_ETH_DEV_SRIOV(dev).active =
- ETH_32_POOLS;
- break;
- default:
- return -EINVAL;
- }
-
- RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = nb_rx_q;
- RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx =
- dev->pci_dev->max_vfs * nb_rx_q;
-
- return 0;
-}
-
-static int
-rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
- const struct rte_eth_conf *dev_conf)
-{
- struct rte_eth_dev *dev = &rte_eth_devices[port_id];
-
- if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
- /* check multi-queue mode */
- if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
- (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB_RSS) ||
- (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB)) {
- /* SRIOV only works in VMDq enable mode */
- PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
- " SRIOV active, "
- "wrong VMDQ mq_mode rx %u tx %u\n",
- port_id,
- dev_conf->rxmode.mq_mode,
- dev_conf->txmode.mq_mode);
- return -EINVAL;
- }
-
- switch (dev_conf->rxmode.mq_mode) {
- case ETH_MQ_RX_VMDQ_DCB:
- case ETH_MQ_RX_VMDQ_DCB_RSS:
- /* DCB/RSS VMDQ in SRIOV mode, not implement yet */
- PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
- " SRIOV active, "
- "unsupported VMDQ mq_mode rx %u\n",
- port_id, dev_conf->rxmode.mq_mode);
- return -EINVAL;
- case ETH_MQ_RX_RSS:
- PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
- " SRIOV active, "
- "Rx mq mode is changed from:"
- "mq_mode %u into VMDQ mq_mode %u\n",
- port_id,
- dev_conf->rxmode.mq_mode,
- dev->data->dev_conf.rxmode.mq_mode);
- case ETH_MQ_RX_VMDQ_RSS:
- dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
- if (nb_rx_q <= RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)
- if (rte_eth_dev_check_vf_rss_rxq_num(port_id, nb_rx_q) != 0) {
- PMD_DEBUG_TRACE("ethdev port_id=%d"
- " SRIOV active, invalid queue"
- " number for VMDQ RSS, allowed"
- " value are 1, 2 or 4\n",
- port_id);
- return -EINVAL;
- }
- break;
- default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE */
- /* if nothing mq mode configure, use default scheme */
- dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_ONLY;
- if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
- RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
- break;
- }
-
- switch (dev_conf->txmode.mq_mode) {
- case ETH_MQ_TX_VMDQ_DCB:
- /* DCB VMDQ in SRIOV mode, not implement yet */
- PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
- " SRIOV active, "
- "unsupported VMDQ mq_mode tx %u\n",
- port_id, dev_conf->txmode.mq_mode);
- return -EINVAL;
- default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */
- /* if nothing mq mode configure, use default scheme */
- dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_ONLY;
- break;
- }
-
- /* check valid queue number */
- if ((nb_rx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) ||
- (nb_tx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)) {
- PMD_DEBUG_TRACE("ethdev port_id=%d SRIOV active, "
- "queue number must less equal to %d\n",
- port_id,
- RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool);
- return -EINVAL;
- }
- } else {
- /* For vmdb+dcb mode check our configuration before we go further */
- if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB) {
- const struct rte_eth_vmdq_dcb_conf *conf;
-
- if (nb_rx_q != ETH_VMDQ_DCB_NUM_QUEUES) {
- PMD_DEBUG_TRACE("ethdev port_id=%d VMDQ+DCB, nb_rx_q "
- "!= %d\n",
- port_id, ETH_VMDQ_DCB_NUM_QUEUES);
- return -EINVAL;
- }
- conf = &(dev_conf->rx_adv_conf.vmdq_dcb_conf);
- if (!(conf->nb_queue_pools == ETH_16_POOLS ||
- conf->nb_queue_pools == ETH_32_POOLS)) {
- PMD_DEBUG_TRACE("ethdev port_id=%d VMDQ+DCB selected, "
- "nb_queue_pools must be %d or %d\n",
- port_id, ETH_16_POOLS, ETH_32_POOLS);
- return -EINVAL;
- }
- }
- if (dev_conf->txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB) {
- const struct rte_eth_vmdq_dcb_tx_conf *conf;
-
- if (nb_tx_q != ETH_VMDQ_DCB_NUM_QUEUES) {
- PMD_DEBUG_TRACE("ethdev port_id=%d VMDQ+DCB, nb_tx_q "
- "!= %d\n",
- port_id, ETH_VMDQ_DCB_NUM_QUEUES);
- return -EINVAL;
- }
- conf = &(dev_conf->tx_adv_conf.vmdq_dcb_tx_conf);
- if (!(conf->nb_queue_pools == ETH_16_POOLS ||
- conf->nb_queue_pools == ETH_32_POOLS)) {
- PMD_DEBUG_TRACE("ethdev port_id=%d VMDQ+DCB selected, "
- "nb_queue_pools != %d or nb_queue_pools "
- "!= %d\n",
- port_id, ETH_16_POOLS, ETH_32_POOLS);
- return -EINVAL;
- }
- }
-
- /* For DCB mode check our configuration before we go further */
- if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) {
- const struct rte_eth_dcb_rx_conf *conf;
-
- if (nb_rx_q != ETH_DCB_NUM_QUEUES) {
- PMD_DEBUG_TRACE("ethdev port_id=%d DCB, nb_rx_q "
- "!= %d\n",
- port_id, ETH_DCB_NUM_QUEUES);
- return -EINVAL;
- }
- conf = &(dev_conf->rx_adv_conf.dcb_rx_conf);
- if (!(conf->nb_tcs == ETH_4_TCS ||
- conf->nb_tcs == ETH_8_TCS)) {
- PMD_DEBUG_TRACE("ethdev port_id=%d DCB selected, "
- "nb_tcs != %d or nb_tcs "
- "!= %d\n",
- port_id, ETH_4_TCS, ETH_8_TCS);
- return -EINVAL;
- }
- }
-
- if (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB) {
- const struct rte_eth_dcb_tx_conf *conf;
-
- if (nb_tx_q != ETH_DCB_NUM_QUEUES) {
- PMD_DEBUG_TRACE("ethdev port_id=%d DCB, nb_tx_q "
- "!= %d\n",
- port_id, ETH_DCB_NUM_QUEUES);
- return -EINVAL;
- }
- conf = &(dev_conf->tx_adv_conf.dcb_tx_conf);
- if (!(conf->nb_tcs == ETH_4_TCS ||
- conf->nb_tcs == ETH_8_TCS)) {
- PMD_DEBUG_TRACE("ethdev port_id=%d DCB selected, "
- "nb_tcs != %d or nb_tcs "
- "!= %d\n",
- port_id, ETH_4_TCS, ETH_8_TCS);
- return -EINVAL;
- }
- }
- }
- return 0;
-}
-
int
rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf)
@@ -1182,14 +991,6 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
ETHER_MAX_LEN;
}
- /* multiple queue mode checking */
- diag = rte_eth_dev_check_mq_mode(port_id, nb_rx_q, nb_tx_q, dev_conf);
- if (diag != 0) {
- PMD_DEBUG_TRACE("port%d rte_eth_dev_check_mq_mode = %d\n",
- port_id, diag);
- return diag;
- }
-
/*
* Setup new number of RX/TX queues and reconfigure device.
*/
--
2.4.0
More information about the dev
mailing list