[dpdk-dev] [PATCH 16/32] net/dpaa2: dpio add support to check SOC type

[Jerin Jacob]

On Sun, Dec 04, 2016 at 11:47:11PM +0530, Hemant Agrawal wrote:
> Signed-off-by: Hemant Agrawal <hemant.agrawal at nxp.com>
> ---
>  drivers/net/dpaa2/base/dpaa2_hw_dpio.c | 74 ++++++++++++++++++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/drivers/net/dpaa2/base/dpaa2_hw_dpio.c b/drivers/net/dpaa2/base/dpaa2_hw_dpio.c
> index 9c6eb96..3b8f87d 100644
> --- a/drivers/net/dpaa2/base/dpaa2_hw_dpio.c
> +++ b/drivers/net/dpaa2/base/dpaa2_hw_dpio.c
> @@ -70,6 +70,18 @@
>  static struct dpio_device_list *dpio_dev_list; /*!< DPIO device list */
>  static uint32_t io_space_count;
>  
> +#define ARM_CORTEX_A53		0xD03
> +#define ARM_CORTEX_A57		0xD07
> +#define ARM_CORTEX_A72		0xD08

May not be good idea to have generic ARM part number definition in driver
file.

> +
> +static int dpaa2_soc_core = ARM_CORTEX_A72;
> +
> +#define NXP_LS2085	1
> +#define NXP_LS2088	2
> +#define NXP_LS1088	3
> +
> +static int dpaa2_soc_family  = NXP_LS2088;
> +
>  /*Stashing Macros default for LS208x*/
>  static int dpaa2_core_cluster_base = 0x04;
>  static int dpaa2_cluster_sz = 2;
> @@ -101,6 +113,58 @@
>  	return dpaa2_core_cluster_base + x;
>  }
>  
> +static int cpuinfo_arm(FILE *file)
> +{
> +	char str[128], *pos;
> +	int part = -1;
> +
> +	#define ARM_CORTEX_A53_INFO	"Cortex-A53"
> +	#define ARM_CORTEX_A57_INFO	"Cortex-A57"
> +	#define ARM_CORTEX_A72_INFO	"Cortex-A72"
> +
> +	while (fgets(str, sizeof(str), file) != NULL) {
> +		if (part >= 0)
> +			break;
> +		pos = strstr(str, "CPU part");
> +		if (pos != NULL) {
> +			pos = strchr(pos, ':');
> +			if (pos != NULL)
> +				sscanf(++pos, "%x", &part);
> +		}
> +	}
> +
> +	dpaa2_soc_core = part;
> +	if (part == ARM_CORTEX_A53) {
> +		dpaa2_soc_family = NXP_LS1088;
> +		printf("\n########## Detected NXP LS108x with %s\n",
> +		       ARM_CORTEX_A53_INFO);
> +	} else if (part == ARM_CORTEX_A57) {
> +		dpaa2_soc_family = NXP_LS2085;
> +		printf("\n########## Detected NXP LS208x Rev1.0 with %s\n",
> +		       ARM_CORTEX_A57_INFO);
> +	} else if (part == ARM_CORTEX_A72) {
> +		dpaa2_soc_family = NXP_LS2088;
> +		printf("\n########## Detected NXP LS208x with %s\n",
> +		       ARM_CORTEX_A72_INFO);
> +	}
> +	return 0;
> +}
> +
> +static void
> +check_cpu_part(void)
> +{
> +	FILE *stream;
> +
> +	stream = fopen("/proc/cpuinfo", "r");
> +	if (!stream) {
> +		PMD_INIT_LOG(WARNING, "Unable to open /proc/cpuinfo\n");
> +		return;
> +	}
> +	cpuinfo_arm(stream);
> +
> +	fclose(stream);
> +}
> +
>  static int
>  configure_dpio_qbman_swp(struct dpaa2_dpio_dev *dpio_dev)
>  {
> @@ -326,6 +390,16 @@ static inline struct dpaa2_dpio_dev *dpaa2_get_qbman_swp(void)
>  {
>  	struct dpaa2_dpio_dev *dpio_dev;
>  	struct vfio_region_info reg_info = { .argsz = sizeof(reg_info)};
> +	static int first_time;
> +
> +	if (!first_time) {
> +		check_cpu_part();
> +		if (dpaa2_soc_family == NXP_LS1088) {
> +			dpaa2_core_cluster_base = 0x02;
> +			dpaa2_cluster_sz = 4;
Can this device configuration information passed through dt/the means
where you are populating the fsl bus for dpio ?

if not arm64 cpu part identification code can go in arm64 common
code. Even better if we have EAL API for same. Looks like x86 similar
attribute called "model"