[dpdk-dev] virtio PMD is not working with master version

Yuanhan Liu yuanhan.liu at linux.intel.com
Fri Feb 26 03:23:58 CET 2016


Mauricio, thanks for the testing and report.

On Thu, Feb 25, 2016 at 02:30:18PM +0100, David Marchand wrote:
> On Thu, Feb 25, 2016 at 12:30 PM, Mauricio Vásquez
> <mauricio.vasquezbernal at studenti.polito.it> wrote:
> > ...
> > EAL: PCI device 0000:00:04.0 on NUMA socket -1
> > EAL:   probe driver: 1af4:1000 rte_virtio_pmd
> > EAL:   PCI memory mapped at 0x7f892dc00000
> > PMD: virtio_read_caps(): [40] skipping non VNDR cap id: 11
> > PMD: virtio_read_caps(): no modern virtio pci device found.
> > PMD: vtpci_init(): trying with legacy virtio pci.
> > EAL: eal_parse_sysfs_value(): cannot open sysfs value
> > /sys/bus/pci/devices/0000:00:04.0/uio/uio0/portio/port0/start
> > EAL: pci_uio_ioport_map(): cannot parse portio start
> > EAL: Error - exiting with code: 1
> >   Cause: Requested device 0000:00:04.0 cannot be used
> > ...
> 
> [snip]
> 
> > ...
> > PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value
> > /sys/bus/pci/devices/0000:00:04.0/uio/uio0/portio/port0/size
> > PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio(): cannot
> > parse size
> > PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xc100 with
> > size=0x20
> 
> [snip]
> 
> >
> > According to git bisect it appears to be that it does not work anymore after
> > the b8f04520ad71 ("virtio: use PCI ioport API") commit.
> 
> >From the logs, I would say I broke uio_pci_generic since we are in
> "uio" case, but uio portio sysfs does not exist.
> virtio pmd fell back to ioports discovery before my change.

Maybe we can do same?

---
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index 4346973..579731c 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -685,12 +685,11 @@ int
 rte_eal_pci_ioport_map(struct rte_pci_device *dev, int bar,
 		       struct rte_pci_ioport *p)
 {
-	int ret;
+	int ret = -1;
 
 	switch (dev->kdrv) {
 #ifdef VFIO_PRESENT
 	case RTE_KDRV_VFIO:
-		ret = -1;
 		if (pci_vfio_is_enabled())
 			ret = pci_vfio_ioport_map(dev, bar, p);
 		break;
@@ -700,14 +699,14 @@ rte_eal_pci_ioport_map(struct rte_pci_device *dev, int bar,
 		ret = pci_uio_ioport_map(dev, bar, p);
 		break;
 	default:
+		break;
+	}
+
 #if defined(RTE_ARCH_X86_64) || defined(RTE_ARCH_I686)
-		/* special case for x86 ... */
+	/* special case for x86 ... */
+	if (ret)
 		ret = pci_ioport_map(dev, bar, p);
-#else
-		ret = -1;
 #endif
-		break;
-	}
 
 	if (!ret)
 		p->dev = dev;
-------------------------------------------------------


If that looks okay to you, I could send a formal patch.

	--yliu

> Problem can be workaround for now by unbinding your device from
> uio_pci_generic or on the contrary bind to igb_uio.
> 
> I've been sick at home, all this week.
> Will see next week for a fix unless someone sends one.
> 
> 
> -- 
> David Marchand


More information about the dev mailing list