[dpdk-dev] [PATCH] virtio: fix packet corruption
Olivier Matz
olivier.matz at 6wind.com
Tue Jul 19 14:31:59 CEST 2016
The support of virtio-user changed the way the mbuf dma address is
retrieved, using a physical address in case of virtio-pci and a virtual
address in case of virtio-user.
This change introduced some possible memory corruption in packets,
replacing:
m->buf_physaddr + RTE_PKTMBUF_HEADROOM
by:
m->buf_physaddr + m->data_off (through a macro)
This patch fixes this issue, restoring the original behavior.
By the way, it also rework the macros, adding a "VIRTIO_" prefix and
API comments.
Fixes: f24f8f9fee8a ("net/virtio: allow virtual address to fill vring descriptors")
Signed-off-by: Olivier Matz <olivier.matz at 6wind.com>
---
drivers/net/virtio/virtio_ethdev.c | 2 +-
drivers/net/virtio/virtio_rxtx.c | 5 +++--
drivers/net/virtio/virtio_rxtx_simple.c | 13 +++++++------
drivers/net/virtio/virtqueue.h | 25 +++++++++++++++++--------
4 files changed, 28 insertions(+), 17 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 850e3ba..fcc996e 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -454,7 +454,7 @@ int virtio_dev_queue_setup(struct rte_eth_dev *dev,
/* For virtio-user case (that is when dev->pci_dev is NULL), we use
* virtual address. And we need properly set _offset_, please see
- * MBUF_DATA_DMA_ADDR in virtqueue.h for more information.
+ * VIRTIO_MBUF_DATA_DMA_ADDR in virtqueue.h for more information.
*/
if (dev->pci_dev)
vq->offset = offsetof(struct rte_mbuf, buf_physaddr);
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index a27208e..9aba044 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -193,7 +193,8 @@ virtqueue_enqueue_recv_refill(struct virtqueue *vq, struct rte_mbuf *cookie)
start_dp = vq->vq_ring.desc;
start_dp[idx].addr =
- MBUF_DATA_DMA_ADDR(cookie, vq->offset) - hw->vtnet_hdr_size;
+ VIRTIO_MBUF_ADDR(cookie, vq) +
+ RTE_PKTMBUF_HEADROOM - hw->vtnet_hdr_size;
start_dp[idx].len =
cookie->buf_len - RTE_PKTMBUF_HEADROOM + hw->vtnet_hdr_size;
start_dp[idx].flags = VRING_DESC_F_WRITE;
@@ -265,7 +266,7 @@ virtqueue_enqueue_xmit(struct virtnet_tx *txvq, struct rte_mbuf *cookie,
}
do {
- start_dp[idx].addr = MBUF_DATA_DMA_ADDR(cookie, vq->offset);
+ start_dp[idx].addr = VIRTIO_MBUF_DATA_DMA_ADDR(cookie, vq);
start_dp[idx].len = cookie->data_len;
start_dp[idx].flags = cookie->next ? VRING_DESC_F_NEXT : 0;
idx = start_dp[idx].next;
diff --git a/drivers/net/virtio/virtio_rxtx_simple.c b/drivers/net/virtio/virtio_rxtx_simple.c
index d8fcc15..6517aa8 100644
--- a/drivers/net/virtio/virtio_rxtx_simple.c
+++ b/drivers/net/virtio/virtio_rxtx_simple.c
@@ -80,8 +80,9 @@ virtqueue_enqueue_recv_refill_simple(struct virtqueue *vq,
vq->sw_ring[desc_idx] = cookie;
start_dp = vq->vq_ring.desc;
- start_dp[desc_idx].addr = MBUF_DATA_DMA_ADDR(cookie, vq->offset) -
- vq->hw->vtnet_hdr_size;
+ start_dp[desc_idx].addr =
+ VIRTIO_MBUF_ADDR(cookie, vq) +
+ RTE_PKTMBUF_HEADROOM - vq->hw->vtnet_hdr_size;
start_dp[desc_idx].len = cookie->buf_len -
RTE_PKTMBUF_HEADROOM + vq->hw->vtnet_hdr_size;
@@ -120,8 +121,8 @@ virtio_rxq_rearm_vec(struct virtnet_rx *rxvq)
*(uint64_t *)p = rxvq->mbuf_initializer;
start_dp[i].addr =
- MBUF_DATA_DMA_ADDR(sw_ring[i], vq->offset) -
- vq->hw->vtnet_hdr_size;
+ VIRTIO_MBUF_ADDR(sw_ring[i], vq) +
+ RTE_PKTMBUF_HEADROOM - vq->hw->vtnet_hdr_size;
start_dp[i].len = sw_ring[i]->buf_len -
RTE_PKTMBUF_HEADROOM + vq->hw->vtnet_hdr_size;
}
@@ -371,7 +372,7 @@ virtio_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
vq->vq_descx[desc_idx + i].cookie = tx_pkts[i];
for (i = 0; i < nb_tail; i++) {
start_dp[desc_idx].addr =
- MBUF_DATA_DMA_ADDR(*tx_pkts, vq->offset);
+ VIRTIO_MBUF_DATA_DMA_ADDR(*tx_pkts, vq);
start_dp[desc_idx].len = (*tx_pkts)->pkt_len;
tx_pkts++;
desc_idx++;
@@ -383,7 +384,7 @@ virtio_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
vq->vq_descx[desc_idx + i].cookie = tx_pkts[i];
for (i = 0; i < nb_commit; i++) {
start_dp[desc_idx].addr =
- MBUF_DATA_DMA_ADDR(*tx_pkts, vq->offset);
+ VIRTIO_MBUF_DATA_DMA_ADDR(*tx_pkts, vq);
start_dp[desc_idx].len = (*tx_pkts)->pkt_len;
tx_pkts++;
desc_idx++;
diff --git a/drivers/net/virtio/virtqueue.h b/drivers/net/virtio/virtqueue.h
index 455aaaf..c452d04 100644
--- a/drivers/net/virtio/virtqueue.h
+++ b/drivers/net/virtio/virtqueue.h
@@ -67,12 +67,21 @@ struct rte_mbuf;
#define VIRTQUEUE_MAX_NAME_SZ 32
#ifdef RTE_VIRTIO_USER
-#define MBUF_DATA_DMA_ADDR(mb, offset) \
- ((uint64_t)((uintptr_t)(*(void **)((uintptr_t)mb + offset)) \
- + (mb)->data_off))
-#else /* RTE_VIRTIO_USER */
-#define MBUF_DATA_DMA_ADDR(mb, offset) rte_mbuf_data_dma_addr(mb)
-#endif /* RTE_VIRTIO_USER */
+/**
+ * Return the physical address (or virtual address in case of
+ * virtio-user) of mbuf data buffer.
+ */
+#define VIRTIO_MBUF_ADDR(mb, vq) (*(uint64_t *)((uintptr_t)(mb) + (vq)->offset))
+#else
+#define VIRTIO_MBUF_ADDR(mb, vq) ((mb)->buf_physaddr)
+#endif
+
+/**
+ * Return the physical address (or virtual address in case of
+ * virtio-user) of mbuf data buffer, taking care of mbuf data offset
+ */
+#define VIRTIO_MBUF_DATA_DMA_ADDR(mb, vq) \
+ (VIRTIO_MBUF_ADDR(mb, vq) + (mb)->data_off)
#define VTNET_SQ_RQ_QUEUE_IDX 0
#define VTNET_SQ_TQ_QUEUE_IDX 1
@@ -182,8 +191,8 @@ struct virtqueue {
void *vq_ring_virt_mem; /**< linear address of vring*/
unsigned int vq_ring_size;
- phys_addr_t vq_ring_mem; /**< physical address of vring */
- /**< use virtual address for virtio-user. */
+ phys_addr_t vq_ring_mem; /**< physical address of vring,
+ * or virtual address for virtio-user. */
/**
* Head of the free chain in the descriptor table. If
--
2.8.1
More information about the dev
mailing list