[dpdk-dev] [PATCH v2 7/9] examples/ipsec-secgw: ipv6 support
De Lara Guarch, Pablo
pablo.de.lara.guarch at intel.com
Tue Jun 7 18:10:03 CEST 2016
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Sergio Gonzalez
> Monroy
> Sent: Wednesday, May 18, 2016 1:42 PM
> To: dev at dpdk.org
> Cc: Mcnamara, John
> Subject: [dpdk-dev] [PATCH v2 7/9] examples/ipsec-secgw: ipv6 support
>
> Support IPSec IPv6 allowing IPv4/IPv6 traffic in IPv4 or IPv6 tunnel.
>
> We need separate Routing (LPM) and SP (ACL) tables for IPv4 and IPv6,
> but a common SA table.
>
> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy at intel.com>
...
> +static inline void
> +ip4_ecn_setup(struct ip *ip4)
> +{
> + if (ip4->ip_tos & IPTOS_ECN_MASK)
> + ip4->ip_tos |= IPTOS_ECN_CE;
> +}
> +
> +static inline void
> +ip6_ecn_setup(struct ip6_hdr *ip6)
> +{
> + if ((ntohl(ip6->ip6_flow) >> 20) & IPTOS_ECN_MASK)
> + ip6->ip6_flow = htonl(ntohl(ip6->ip6_flow) |
> + (IPTOS_ECN_CE << 20));
> }
>
> static inline int
> -ip4ip_inbound(struct rte_mbuf *m, uint32_t offset)
> +ipip_inbound(struct rte_mbuf *m, uint32_t offset)
This function should return void, since it is returning 0 always.
> {
> - struct ip *inip;
> - struct ip *outip;
> + struct ip *inip4, *outip4;
> + struct ip6_hdr *inip6, *outip6;
> + uint32_t ip_len, set_ecn;
>
> - outip = rte_pktmbuf_mtod(m, struct ip*);
> + outip4 = rte_pktmbuf_mtod(m, struct ip*);
>
> - RTE_ASSERT(outip->ip_v == IPVERSION);
> + RTE_ASSERT(outip4->ip_v == IPVERSION || outip4->ip_v ==
> IP6_VERSION);
>
> - offset += sizeof(struct ip);
> - inip = (struct ip *)rte_pktmbuf_adj(m, offset);
> - RTE_ASSERT(inip->ip_v == IPVERSION || inip->ip_v ==
> IPV6_VERSION);
> + if (outip4->ip_v == IPVERSION) {
> + ip_len = sizeof(struct ip);
> + set_ecn = ((outip4->ip_tos & IPTOS_ECN_CE) ==
> IPTOS_ECN_CE);
> + } else {
> + outip6 = (struct ip6_hdr *)outip4;
> + ip_len = sizeof(struct ip6_hdr);
> + set_ecn = ntohl(outip6->ip6_flow) >> 20;
> + set_ecn = ((set_ecn & IPTOS_ECN_CE) == IPTOS_ECN_CE);
> + }
> +
> + inip4 = (struct ip *)rte_pktmbuf_adj(m, offset + ip_len);
> + RTE_ASSERT(inip4->ip_v == IPVERSION || inip4->ip_v ==
> IP6_VERSION);
>
> /* Check packet is still bigger than IP header (inner) */
> - RTE_ASSERT(rte_pktmbuf_pkt_len(m) > sizeof(struct ip));
> + RTE_ASSERT(rte_pktmbuf_pkt_len(m) > ip_len);
>
> /* RFC4301 5.1.2.1 Note 6 */
> - if ((inip->ip_tos & htons(IPTOS_ECN_ECT0 | IPTOS_ECN_ECT1)) &&
> - ((outip->ip_tos & htons(IPTOS_ECN_CE)) ==
> IPTOS_ECN_CE))
> - inip->ip_tos |= htons(IPTOS_ECN_CE);
> + if (inip4->ip_v == IPVERSION) {
> + if (set_ecn)
> + ip4_ecn_setup(inip4);
> + /* XXX This should be done by the forwarding engine instead
> */
> + inip4->ip_ttl -= 1;
> + } else {
> + inip6 = (struct ip6_hdr *)inip4;
> + if (set_ecn)
> + ip6_ecn_setup(inip6);
> + /* XXX This should be done by the forwarding engine instead
> */
> + inip6->ip6_hops -= 1;
> + }
>
> return 0;
> }
More information about the dev
mailing list