[dpdk-dev] [PATCH v2] doc: virtio pmd versions

Zhihong Wang zhihong.wang at intel.com
Wed Jun 15 01:53:17 CEST 2016


This patch explains all the versions of current virtio pmd implementation,
what's the difference, and how to choose the right version.

--------------
Changes in v2:

   1. Changes on format and few descriptions.


Signed-off-by: Zhihong Wang <zhihong.wang at intel.com>
---
 doc/guides/nics/virtio.rst | 64 +++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 58 insertions(+), 6 deletions(-)

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 06ca433..a4fef89 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -73,7 +73,7 @@ In this release, the virtio PMD driver provides the basic functionality of packe
 
 *   It supports multicast packets and promiscuous mode.
 
-*   The descriptor number for the RX/TX queue is hard-coded to be 256 by qemu.
+*   The descriptor number for the Rx/Tx queue is hard-coded to be 256 by qemu.
     If given a different descriptor number by the upper application,
     the virtio PMD generates a warning and fall back to the hard-coded value.
 
@@ -163,8 +163,8 @@ Host2VM communication example
     which means received packets come from vEth0, and transmitted packets is sent to vEth0.
 
 #.  In the guest, bind the virtio device to the uio_pci_generic kernel module and start the forwarding application.
-    When the virtio port in guest bursts rx, it is getting packets from the raw socket's receive queue.
-    When the virtio port bursts tx, it is sending packet to the tx_q.
+    When the virtio port in guest bursts Rx, it is getting packets from the raw socket's receive queue.
+    When the virtio port bursts Tx, it is sending packet to the tx_q.
 
     .. code-block:: console
 
@@ -183,7 +183,7 @@ Host2VM communication example
 
     The packet reception and transmission flow path is:
 
-    IXIA packet generator->82599 PF->KNI rx queue->KNI raw socket queue->Guest VM virtio port 0 rx burst->Guest VM virtio port 0 tx burst-> KNI tx queue->82599 PF-> IXIA packet generator
+    IXIA packet generator->82599 PF->KNI Rx queue->KNI raw socket queue->Guest VM virtio port 0 Rx burst->Guest VM virtio port 0 Tx burst-> KNI Tx queue->82599 PF-> IXIA packet generator
 
 Virtio with qemu virtio Back End
 --------------------------------
@@ -206,8 +206,60 @@ Virtio with qemu virtio Back End
 
 In this example, the packet reception flow path is:
 
-    IXIA packet generator->82599 PF->Linux Bridge->TAP0's socket queue-> Guest VM virtio port 0 rx burst-> Guest VM 82599 VF port1 tx burst-> IXIA packet generator
+    IXIA packet generator->82599 PF->Linux Bridge->TAP0's socket queue-> Guest VM virtio port 0 Rx burst-> Guest VM 82599 VF port1 Tx burst-> IXIA packet generator
 
 The packet transmission flow is:
 
-    IXIA packet generator-> Guest VM 82599 VF port1 rx burst-> Guest VM virtio port 0 tx burst-> tap -> Linux Bridge->82599 PF-> IXIA packet generator
+    IXIA packet generator-> Guest VM 82599 VF port1 Rx burst-> Guest VM virtio port 0 Tx burst-> tap -> Linux Bridge->82599 PF-> IXIA packet generator
+
+
+Virtio PMD Versions
+-------------------
+
+Virtio driver has 3 versions of Rx functions and 2 versions of Tx functions.
+
+Rx functions:
+
+#. ``virtio_recv_pkts``:
+   Regular version without mergeable Rx buffer support.
+
+#. ``virtio_recv_mergeable_pkts``:
+   Regular version with mergeable Rx buffer support.
+
+#. ``virtio_recv_pkts_vec``:
+   Simple version without mergeable Rx buffer support, also fixes the available ring indexes and uses vector instructions to optimize performance.
+
+Tx functions:
+
+#. ``virtio_xmit_pkts``:
+   Regular version.
+
+#. ``virtio_xmit_pkts_simple``:
+   Simple version fixes the available ring indexes to optimize performance.
+
+
+By default, the non-vector versions are used:
+
+*   For Rx: If mergeable Rx buffers is disabled then ``virtio_recv_pkts`` is used; otherwise ``virtio_recv_mergeable_pkts``.
+
+*   For Tx: ``virtio_xmit_pkts``.
+
+
+Setting ``txq_flags`` to ``VIRTIO_SIMPLE_FLAGS`` (0xF01) enables the simple version of the virtio poll mode driver:
+
+*   For Rx: ``virtio_recv_pkts_vec``.
+
+*   For Tx: ``virtio_xmit_pkts_simple``.
+
+
+The simple version will only be enabled when:
+
+*   Mergeable Rx buffers is disabled.
+
+*   Single segment is specified.
+
+*   No offload support is needed.
+
+Example of using the simple version of the virtio poll mode driver in ``testpmd``::
+
+   testpmd -c 0x7 -n 4 -- -i --txqflags=0xF01 --rxq=1 --txq=1 --nb-cores=1
-- 
2.5.0



More information about the dev mailing list