[dpdk-dev] [PATCH] i40e: fix vlan stripping from inner header

[Jingjing Wu]

Previously, for tunnel packets, such as VXLAN/NVGRE, the vlan
tags of the inner header will be stripped without putting vlan
info to descriptor, what is not expected behaviour.
This patch fixes it by changing hardware configuration to leave
the inner packet alone.

Fixes: 4861cde46116 ("i40e: new poll mode driver")
Fixes: a778a1fa2e4e ("i40e: set up and initialize flow director")
Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
---
 doc/guides/rel_notes/release_16_07.rst | 7 +++++++
 drivers/net/i40e/i40e_fdir.c           | 2 +-
 drivers/net/i40e/i40e_rxtx.c           | 7 ++++++-
 3 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/doc/guides/rel_notes/release_16_07.rst b/doc/guides/rel_notes/release_16_07.rst
index 83c841b..f6d543c 100644
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@@ -54,6 +54,13 @@ EAL
 Drivers
 ~~~~~~~
 
+* **i40e: Fixed vlan stripping from inner header.**
+
+  Previously, for tunnel packets, such as VXLAN/NVGRE, the vlan
+  tags of the inner header will be stripped without putting vlan
+  info to descriptor.
+  Now this issue is fixed by disabling vlan stripping from inner header.
+
 
 Libraries
 ~~~~~~~~~
diff --git a/drivers/net/i40e/i40e_fdir.c b/drivers/net/i40e/i40e_fdir.c
index ff57e8a..cd4c324 100644
--- a/drivers/net/i40e/i40e_fdir.c
+++ b/drivers/net/i40e/i40e_fdir.c
@@ -163,7 +163,7 @@ i40e_fdir_rx_queue_init(struct i40e_rx_queue *rxq)
 	rx_ctx.lrxqthresh = 2;
 	rx_ctx.crcstrip = 0;
 	rx_ctx.l2tsel = 1;
-	rx_ctx.showiv = 1;
+	rx_ctx.showiv = 0;
 	rx_ctx.prefena = 1;
 
 	err = i40e_clear_lan_rx_queue_context(hw, rxq->reg_idx);
diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index 4d35d83..a69fde1 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -2904,7 +2904,12 @@ i40e_rx_queue_init(struct i40e_rx_queue *rxq)
 	rx_ctx.lrxqthresh = 2;
 	rx_ctx.crcstrip = (rxq->crc_len == 0) ? 1 : 0;
 	rx_ctx.l2tsel = 1;
-	rx_ctx.showiv = 1;
+	/* showiv indicates if inner VLAN is stripped inside of tunnel
+	 * packet. When set it to 1, vlan information is stripped from
+	 * the inner header, but the hardware does not put it in the
+	 * descriptor. So set it zero by default.
+	 */
+	rx_ctx.showiv = 0;
 	rx_ctx.prefena = 1;
 
 	err = i40e_clear_lan_rx_queue_context(hw, pf_q);
-- 
2.4.0