[dpdk-dev] [PATCH 4/4] net/enic: extend fdir support for 1300 series adapters

[John Daley (johndale)]

> -----Original Message-----
> From: Ferruh Yigit [mailto:ferruh.yigit at intel.com]
> Sent: Tuesday, October 11, 2016 2:22 AM
> To: John Daley (johndale) <johndale at cisco.com>;
> bruce.richardson at intel.com
> Cc: dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 4/4] net/enic: extend fdir support for 1300
> series adapters
> 
> Hi John,
> 
> On 9/29/2016 9:56 PM, John Daley wrote:
> > 1300 series Cisco adapter firmware version 2.0(13) for UCS C-series
> > servers and 3.1(2) for blade servers supports more filtering
> > capabilities. The feature can be enabled via Cisco CIMC or USCM with
> > the 'advanced filters' radio button. When enabled, the these
> > additional flow director modes are available:
> > 	RTE_ETH_FLOW_NONFRAG_IPV4_OTHER
> > 	RTE_ETH_FLOW_NONFRAG_IPV4_SCTP
> > 	RTE_ETH_FLOW_NONFRAG_IPV6_UDP
> > 	RTE_ETH_FLOW_NONFRAG_IPV6_TCP
> > 	RTE_ETH_FLOW_NONFRAG_IPV6_SCTP
> > 	RTE_ETH_FLOW_NONFRAG_IPV6_OTHER
> >
> > Changes:
> > - Detect and set an 'advanced filters' flag dependent on the adapter
> >   capability.
> > - Implement RTE_ETH_FILTER_INFO filter op to return the flow types
> >   available dependent on whether advanced filters are enabled.
> > - Use a function pointer to select how filters are added to the adapter:
> >   copy_fltr_v1() for older firmware/adapters or copy_fltr_v2() for
> >   adapters which support advanced filters.
> > - Apply fdir global masks to filters when in advanced filter mode.
> > - Update documentation.
> >
> > Signed-off-by: John Daley <johndale at cisco.com>
> > Reviewed-by: Nelson Escobar <neescoba at cisco.com>
> > ---
> 
> <...>
> 
> >
> > +void enic_fdir_info_get(struct enic *enic, struct rte_eth_fdir_info
> > +*info) {
> > +	info->mode = enic->fdir.modes;
> 
> This cause a icc build error:
> .../drivers/net/enic/enic_clsf.c(77):
> error #188: enumerated type mixed with another type
>         info->mode = enic->fdir.modes;
>                    ^
> 
> Just casting to the enum fixes it:
> +       info->mode = (enum rte_fdir_mode)enic->fdir.modes;
> 
> Since the modification is trivial, if you agree with the change, we can apply it
> without needing a new version of the patch?
> 

Looks good, thank you and sorry for the trouble.
-john

> <...>