[dpdk-dev] [PATCH v3] crypto/qat: add Intel QuickAssist C62x device
Deepak Kumar Jain
deepak.k.jain at intel.com
Tue Sep 13 11:11:26 CEST 2016
From: Deepak Kumar JAIN <deepak.k.jain at intel.com>
Signed-off-by: Deepak Kumar Jain <deepak.k.jain at intel.com>
Acked-by: Fiona Trahe <fiona.trahe at intel.com>
---
Changes in v3:
Added new feature information
Changes in v2:
Removed trialing white spaces
doc/guides/cryptodevs/qat.rst | 82 ++++++++++++++++++++++++++++++++--
doc/guides/rel_notes/release_16_11.rst | 4 ++
drivers/crypto/qat/rte_qat_cryptodev.c | 3 ++
3 files changed, 85 insertions(+), 4 deletions(-)
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index bb62f22..f6091dd 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -27,11 +27,12 @@
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-Quick Assist Crypto Poll Mode Driver
+Intel(R) QuickAssist (QAT) Crypto Poll Mode Driver
====================================
The QAT PMD provides poll mode crypto driver support for **Intel QuickAssist
-Technology DH895xxC** hardware accelerator.
+Technology DH895xxC** and **Intel QuickAssist Technology C62x**
+hardware accelerator.
Features
@@ -86,9 +87,13 @@ If you are running on kernel 4.4 or greater, see instructions for
`Installation using kernel.org driver`_ below. If you are on a kernel earlier
than 4.4, see `Installation using 01.org QAT driver`_.
+For **Intel QuickAssist Technology C62x** device, kernel 4.5 or greater is
+needed. See instructions for `instructions using kernel.org driver`_ below.
+
Installation using 01.org QAT driver
------------------------------------
+NOTE: There is no driver available for **Intel QuickAssist Technology C62x** on 01.org.
Download the latest QuickAssist Technology Driver from `01.org
<https://01.org/packet-processing/intel%C2%AE-quickassist-technology-drivers-and-patches>`_
@@ -166,6 +171,7 @@ If the build or install fails due to mismatching kernel sources you may need to
Installation using kernel.org driver
------------------------------------
+For **Intel QuickAssist Technology DH895xxC**:
Assuming you are running on at least a 4.4 kernel, you can use the stock kernel.org QAT
driver to start the QAT hardware.
@@ -185,9 +191,9 @@ You should see the following output::
qat_dh895xcc 5626 0
intel_qat 82336 1 qat_dh895xcc
-Next, you need to expose the VFs using the sysfs file system.
+Next, you need to expose the Virtual Functions (VFs) using the sysfs file system.
-First find the bdf of the DH895xCC device::
+First find the bdf of the physical function (PF) of the DH895xCC device::
lspci -d : 435
@@ -225,10 +231,53 @@ cd to your linux source root directory and start the qat kernel modules:
``IOMMU should be enabled for SR-IOV to work correctly``
+For **Intel QuickAssist Technology C62x**:
+Assuming you are running on at least a 4.5 kernel, you can use the stock kernel.org QAT
+driver to start the QAT hardware.
+
+The steps below assume you are:
+
+* Running DPDK on a platform with one ``C62x`` device.
+* On a kernel at least version 4.5.
+
+In BIOS ensure that SRIOV is enabled and VT-d is disabled.
+
+Ensure the QAT driver is loaded on your system, by executing::
+
+ lsmod | grep qat
+
+You should see the following output::
+
+ qat_c62x 16384 0
+ intel_qat 122880 1 qat_c62x
+
+Next, you need to expose the VFs using the sysfs file system.
+
+First find the bdf of the C62x device::
+
+ lspci -d:37c8
+
+You should see output similar to::
+
+ 1a:00.0 Co-processor: Intel Corporation Device 37c8
+ 3d:00.0 Co-processor: Intel Corporation Device 37c8
+ 3f:00.0 Co-processor: Intel Corporation Device 37c8
+
+For each c62x device there are 3 PFs.
+Using the sysfs, for each PF, enable the 16 VFs::
+
+ echo 16 > /sys/bus/pci/drivers/c6xx/0000\:1a\:00.0/sriov_numvfs
+
+If you get an error, it's likely you're using a QAT kernel driver earlier than kernel 4.5.
+To verify that the VFs are available for use - use ``lspci -d:37c9`` to confirm
+the bdf of the 48 VF devices are available per ``C62x`` device.
+
+To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_.
Binding the available VFs to the DPDK UIO driver
------------------------------------------------
+For **Intel(R) QuickAssist Technology DH895xcc** device:
The unbind command below assumes ``bdfs`` of ``03:01.00-03:04.07``, if yours are different adjust the unbind command below::
cd $RTE_SDK
@@ -245,3 +294,28 @@ The unbind command below assumes ``bdfs`` of ``03:01.00-03:04.07``, if yours are
echo "8086 0443" > /sys/bus/pci/drivers/igb_uio/new_id
You can use ``lspci -vvd:443`` to confirm that all devices are now in use by igb_uio kernel driver.
+
+For **Intel(R) QuickAssist Technology C62x** device:
+The unbind command below assumes ``bdfs`` of ``1a:01.00-1a:02.07``, ``3d:01.00-3d:02.07`` and ``3f:01.00-3f:02.07``,
+if yours are different adjust the unbind command below::
+
+ cd $RTE_SDK
+ modprobe uio
+ insmod ./build/kmod/igb_uio.ko
+
+ for device in $(seq 1 2); do \
+ for fn in $(seq 0 7); do \
+ echo -n 0000:1a:0${device}.${fn} > \
+ /sys/bus/pci/devices/0000\:1a\:0${device}.${fn}/driver/unbind; \
+
+ echo -n 0000:3d:0${device}.${fn} > \
+ /sys/bus/pci/devices/0000\:3d\:0${device}.${fn}/driver/unbind; \
+
+ echo -n 0000:3f:0${device}.${fn} > \
+ /sys/bus/pci/devices/0000\:3f\:0${device}.${fn}/driver/unbind; \
+ done; \
+ done
+
+ echo "8086 37c9" > /sys/bus/pci/drivers/igb_uio/new_id
+
+You can use ``lspci -vvd:37c9`` to confirm that all devices are now in use by igb_uio kernel driver.
diff --git a/doc/guides/rel_notes/release_16_11.rst b/doc/guides/rel_notes/release_16_11.rst
index 9b2c775..5db495e 100644
--- a/doc/guides/rel_notes/release_16_11.rst
+++ b/doc/guides/rel_notes/release_16_11.rst
@@ -36,6 +36,10 @@ New Features
This section is a comment. Make sure to start the actual text at the margin.
+* ** Added support of C62XX Device in QAT PMD.**
+ Support for Device c62xx has been enabled in QAT PMD.
+
+
* **Updated the QAT PMD.**
The QAT PMD was updated with changes including the following:
diff --git a/drivers/crypto/qat/rte_qat_cryptodev.c b/drivers/crypto/qat/rte_qat_cryptodev.c
index 82ab047..e606eb5 100644
--- a/drivers/crypto/qat/rte_qat_cryptodev.c
+++ b/drivers/crypto/qat/rte_qat_cryptodev.c
@@ -71,6 +71,9 @@ static struct rte_pci_id pci_id_qat_map[] = {
{
RTE_PCI_DEVICE(0x8086, 0x0443),
},
+ {
+ RTE_PCI_DEVICE(0x8086, 0x37c9),
+ },
{.device_id = 0},
};
--
2.5.5
More information about the dev
mailing list