[dpdk-dev] [PATCH] drivers/i40e: fix the hash filter invalid calculation in X722
Ferruh Yigit
ferruh.yigit at intel.com
Thu Sep 29 20:15:43 CEST 2016
On 9/26/2016 11:51 AM, Jeff Guo wrote:
> As X722 extracts IPv4 header to Field Vector different with XL710/X710,
> need to corresponding to modify the fields of IPv4 header in input set
> to map different default Field Vector Table of different nics.
>
> Signed-off-by: Jeff Guo <jia.guo at intel.com>
> ---
> drivers/net/i40e/i40e_ethdev.c | 77 +++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 73 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index b04c833..9b4c71f 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -211,6 +211,18 @@
> #define I40E_REG_INSET_L3_SRC_IP4 0x0001800000000000ULL
> /* Destination IPv4 address */
> #define I40E_REG_INSET_L3_DST_IP4 0x0000001800000000ULL
> +#ifdef X722_SUPPORT
> +/* Source IPv4 address for X722 */
> +#define I40E_X722_REG_INSET_L3_SRC_IP4 0x0006000000000000ULL
These macros defined here within "#ifdef X722_SUPPORT" and later used
unconditionally, this will cause a compile error when "X722_SUPPORT" not
defined.
> +/* Destination IPv4 address for X722 */
> +#define I40E_X722_REG_INSET_L3_DST_IP4 0x0000060000000000ULL
> +/* IPv4 Type of Service (TOS) */
> +#define I40E_X722_REG_INSET_L3_IP4_TOS 0x0040000000000000ULL
This value seems same as I40E_REG_INSET_L3_IP4_TOS, why creating a X722
version of this?
> +/* IPv4 Protocol */
> +#define I40E_X722_REG_INSET_L3_IP4_PROTO 0x0010000000000000ULL
> +/* IPv4 Time to Live */
> +#define I40E_X722_REG_INSET_L3_IP4_TTL 0x0010000000000000ULL
> +#endif
> /* IPv4 Type of Service (TOS) */
> #define I40E_REG_INSET_L3_IP4_TOS 0x0040000000000000ULL
> /* IPv4 Protocol */
> @@ -7372,7 +7384,7 @@ i40e_parse_input_set(uint64_t *inset,
> * and vice versa
> */
> static uint64_t
> -i40e_translate_input_set_reg(uint64_t input)
> +i40e_translate_input_set_reg(enum i40e_mac_type type, uint64_t input)
> {
> uint64_t val = 0;
> uint16_t i;
> @@ -7419,14 +7431,70 @@ i40e_translate_input_set_reg(uint64_t input)
> {I40E_INSET_FLEX_PAYLOAD_W8, I40E_REG_INSET_FLEX_PAYLOAD_WORD8},
> };
>
> + static const struct {
> + uint64_t inset;
> + uint64_t inset_reg;
Since creating second instance of this struct, why not extract strcut
declaration?
> + } inset_map1[] = {
Is it possible to use more descriptive variable name, hard to
distinguish diff between inset_map and inset_map1.
> + {I40E_INSET_DMAC, I40E_REG_INSET_L2_DMAC},
> + {I40E_INSET_SMAC, I40E_REG_INSET_L2_SMAC},
> + {I40E_INSET_VLAN_OUTER, I40E_REG_INSET_L2_OUTER_VLAN},
> + {I40E_INSET_VLAN_INNER, I40E_REG_INSET_L2_INNER_VLAN},
> + {I40E_INSET_LAST_ETHER_TYPE, I40E_REG_INSET_LAST_ETHER_TYPE},
---->
> + {I40E_INSET_IPV4_SRC, I40E_X722_REG_INSET_L3_SRC_IP4},
> + {I40E_INSET_IPV4_DST, I40E_X722_REG_INSET_L3_DST_IP4},
> + {I40E_INSET_IPV4_TOS, I40E_X722_REG_INSET_L3_IP4_TOS},
> + {I40E_INSET_IPV4_PROTO, I40E_X722_REG_INSET_L3_IP4_PROTO},
> + {I40E_INSET_IPV4_TTL, I40E_X722_REG_INSET_L3_IP4_TTL},
<----
Since limited number of values are different from inset_map[], and most
of them are duplication, is it possible to prevent duplication?
> + {I40E_INSET_IPV6_SRC, I40E_REG_INSET_L3_SRC_IP6},
> + {I40E_INSET_IPV6_DST, I40E_REG_INSET_L3_DST_IP6},
> + {I40E_INSET_IPV6_TC, I40E_REG_INSET_L3_IP6_TC},
> + {I40E_INSET_IPV6_NEXT_HDR, I40E_REG_INSET_L3_IP6_NEXT_HDR},
> + {I40E_INSET_IPV6_HOP_LIMIT, I40E_REG_INSET_L3_IP6_HOP_LIMIT},
> + {I40E_INSET_SRC_PORT, I40E_REG_INSET_L4_SRC_PORT},
> + {I40E_INSET_DST_PORT, I40E_REG_INSET_L4_DST_PORT},
> + {I40E_INSET_SCTP_VT, I40E_REG_INSET_L4_SCTP_VERIFICATION_TAG},
> + {I40E_INSET_TUNNEL_ID, I40E_REG_INSET_TUNNEL_ID},
> + {I40E_INSET_TUNNEL_DMAC,
> + I40E_REG_INSET_TUNNEL_L2_INNER_DST_MAC},
> + {I40E_INSET_TUNNEL_IPV4_DST, I40E_REG_INSET_TUNNEL_L3_DST_IP4},
> + {I40E_INSET_TUNNEL_IPV6_DST, I40E_REG_INSET_TUNNEL_L3_DST_IP6},
> + {I40E_INSET_TUNNEL_SRC_PORT,
> + I40E_REG_INSET_TUNNEL_L4_UDP_SRC_PORT},
> + {I40E_INSET_TUNNEL_DST_PORT,
> + I40E_REG_INSET_TUNNEL_L4_UDP_DST_PORT},
> + {I40E_INSET_VLAN_TUNNEL, I40E_REG_INSET_TUNNEL_VLAN},
> + {I40E_INSET_FLEX_PAYLOAD_W1, I40E_REG_INSET_FLEX_PAYLOAD_WORD1},
> + {I40E_INSET_FLEX_PAYLOAD_W2, I40E_REG_INSET_FLEX_PAYLOAD_WORD2},
> + {I40E_INSET_FLEX_PAYLOAD_W3, I40E_REG_INSET_FLEX_PAYLOAD_WORD3},
> + {I40E_INSET_FLEX_PAYLOAD_W4, I40E_REG_INSET_FLEX_PAYLOAD_WORD4},
> + {I40E_INSET_FLEX_PAYLOAD_W5, I40E_REG_INSET_FLEX_PAYLOAD_WORD5},
> + {I40E_INSET_FLEX_PAYLOAD_W6, I40E_REG_INSET_FLEX_PAYLOAD_WORD6},
> + {I40E_INSET_FLEX_PAYLOAD_W7, I40E_REG_INSET_FLEX_PAYLOAD_WORD7},
> + {I40E_INSET_FLEX_PAYLOAD_W8, I40E_REG_INSET_FLEX_PAYLOAD_WORD8},
> + };
> +
> if (input == 0)
> return val;
>
> /* Translate input set to register aware inset */
> +#ifdef X722_SUPPORT
> + if (type == I40E_MAC_X722) {
> + for (i = 0; i < RTE_DIM(inset_map1); i++) {
> + if (input & inset_map1[i].inset)
> + val |= inset_map1[i].inset_reg;
> + }
> + } else {
> + for (i = 0; i < RTE_DIM(inset_map); i++) {
> + if (input & inset_map[i].inset)
> + val |= inset_map[i].inset_reg;
> + }
> + }
> +#else
> for (i = 0; i < RTE_DIM(inset_map); i++) {
> if (input & inset_map[i].inset)
> val |= inset_map[i].inset_reg;
> }
> +#endif
What about something like this, to prevent duplication:
inset_map_x = inset_map;
#ifdef X722_SUPPORT
if (type == I40E_MAC_X722)
inset_map_x = inset_map1;
#endif
for (i = 0; i < RTE_DIM(inset_map_x); i++) {
if (input & inset_map_x[i].inset)
val |= inset_map_x[i].inset_reg;
}
>
> return val;
> }
> @@ -7510,7 +7578,8 @@ i40e_filter_input_set_init(struct i40e_pf *pf)
> I40E_INSET_MASK_NUM_REG);
> if (num < 0)
> return;
> - inset_reg = i40e_translate_input_set_reg(input_set);
> + inset_reg = i40e_translate_input_set_reg(hw->mac.type,
> + input_set);
>
> i40e_check_write_reg(hw, I40E_PRTQF_FD_INSET(pctype, 0),
> (uint32_t)(inset_reg & UINT32_MAX));
> @@ -7592,7 +7661,7 @@ i40e_hash_filter_inset_select(struct i40e_hw *hw,
> if (num < 0)
> return -EINVAL;
>
> - inset_reg |= i40e_translate_input_set_reg(input_set);
> + inset_reg |= i40e_translate_input_set_reg(hw->mac.type, input_set);
>
> i40e_check_write_reg(hw, I40E_GLQF_HASH_INSET(0, pctype),
> (uint32_t)(inset_reg & UINT32_MAX));
> @@ -7668,7 +7737,7 @@ i40e_fdir_filter_inset_select(struct i40e_pf *pf,
> if (num < 0)
> return -EINVAL;
>
> - inset_reg |= i40e_translate_input_set_reg(input_set);
> + inset_reg |= i40e_translate_input_set_reg(hw->mac.type, input_set);
>
> i40e_check_write_reg(hw, I40E_PRTQF_FD_INSET(pctype, 0),
> (uint32_t)(inset_reg & UINT32_MAX));
>
More information about the dev
mailing list