[dpdk-dev] [PATCH v6 1/3] lib/librte_ether: add support for port reset
Yang, Qiming
qiming.yang at intel.com
Fri Apr 7 08:58:48 CEST 2017
Hi, Wei
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Wei Zhao
> Sent: Thursday, April 6, 2017 2:51 PM
> To: dev at dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu at intel.com>; Zhao1, Wei
> <wei.zhao1 at intel.com>
> Subject: [dpdk-dev] [PATCH v6 1/3] lib/librte_ether: add support for port
> reset
>
> Add support for port reset in rte layer.This reset feature can not only used in
> vf port reset in later code develop, but alsopf port.But in this patch set, we
> only limit the discussion scope to vf reset.
> This patch Add an API to restart the device.
' alsopf' should add space. 'Add' should be lowercase.
> It's for VF device in this scenario, kernel PF + DPDK VF.
> When the PF port down->up, APP should call this API to restart VF port. Most
> likely, APP should call it in its management thread and guarantee the thread
> safe. It means APP should stop the rx/tx and the device, then restart the
> device, then recover the device and rx/tx.This API can also do some restore
> work for the port.
Please check the grammar problems in this paragraph.
>
> Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
> Signed-off-by: Wei Zhao <wei.zhao1 at intel.com>
> ---
> lib/librte_ether/rte_ethdev.c | 17 +++++++++++++++++
> lib/librte_ether/rte_ethdev.h | 28 ++++++++++++++++++++++++++++
> lib/librte_ether/rte_ether_version.map | 6 ++++++
> 3 files changed, 51 insertions(+)
>
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index eb0a94a..2e06dca 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -3273,3 +3273,20 @@ rte_eth_dev_l2_tunnel_offload_set(uint8_t
> port_id,
> -ENOTSUP);
> return (*dev->dev_ops->l2_tunnel_offload_set)(dev, l2_tunnel,
> mask, en); }
> +
> +int
> +rte_eth_dev_reset(uint8_t port_id)
> +{
> + struct rte_eth_dev *dev;
> + int diag;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> +
> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_reset, -
> ENOTSUP);
> +
> + diag = (*dev->dev_ops->dev_reset)(dev);
> +
> + return diag;
> +}
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> index 4be217c..8287c50 100644
> --- a/lib/librte_ether/rte_ethdev.h
> +++ b/lib/librte_ether/rte_ethdev.h
> @@ -1367,6 +1367,9 @@ typedef int (*eth_l2_tunnel_offload_set_t)
> uint8_t en);
> /**< @internal enable/disable the l2 tunnel offload functions */
>
> +typedef int (*eth_dev_reset_t)(struct rte_eth_dev *dev); /**<
> + at internal Function used to reset a configured Ethernet device. */
> +
> #ifdef RTE_NIC_BYPASS
>
> enum {
> @@ -1509,6 +1512,9 @@ struct eth_dev_ops {
> eth_l2_tunnel_offload_set_t l2_tunnel_offload_set;
> /** Enable/disable l2 tunnel offload functions. */
>
> + /** Reset device. */
> + eth_dev_reset_t dev_reset;
> +
> eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue
> rate limit. */
>
> rss_hash_update_t rss_hash_update; /** Configure RSS hash
> protocols. */
> @@ -4413,6 +4419,28 @@ int
> rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
>
> /**
> + * Reset an ethernet device when it's not working. One scenario is,
> +after PF
> + * port is down and up, the related VF port should be reset.
Is there have other scenario? I don't know what is 'down and up' means? Can you put it another way?
> + * The API will stop the port, clear the rx/tx queues, re-setup the
> +rx/tx
> + * queues, restart the port.
> + * Before calling this API, APP should stop the rx/tx. When tx is being
> +stopped,
> + * APP can drop the packets and release the buffer instead of sending them.
> + * This function can also do some restore work for the port, for
> +example, it can
> + * restore the added parameters of vlan, mac_addrs,
> +promisc_unicast_enabled
> + * flag and promisc_multicast_enabled flag.
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + *
> + * @return
> + * - (0) if successful.
> + * - (-ENODEV) if port identifier is invalid.
> + * - (-ENOTSUP) if hardware doesn't support this function.
> + */
> +int
> +rte_eth_dev_reset(uint8_t port_id);
> +
> +/**
> * @internal
> * Wrapper for use by pci drivers as a .probe function to attach to a ethdev
> * interface.
> diff --git a/lib/librte_ether/rte_ether_version.map
> b/lib/librte_ether/rte_ether_version.map
> index c6c9d0d..529b27f 100644
> --- a/lib/librte_ether/rte_ether_version.map
> +++ b/lib/librte_ether/rte_ether_version.map
> @@ -154,3 +154,9 @@ DPDK_17.02 {
> rte_flow_validate;
>
> } DPDK_16.11;
> +
> +DPDK_17.05 {
> + global:
> +
> + rte_eth_dev_reset;
> +} DPDK_17.02;
> \ No newline at end of file
> --
> 2.9.3
More information about the dev
mailing list