[dpdk-dev] [PATCH] net/i40e: do not turn on flexible payload on driver init

[Xing, Beilei]

> -----Original Message-----
> From: Xing, Beilei
> Sent: Monday, December 11, 2017 2:00 PM
> To: Rybalchenko, Kirill <kirill.rybalchenko at intel.com>; dev at dpdk.org
> Cc: Chilikin, Andrey <andrey.chilikin at intel.com>; Wu, Jingjing
> <jingjing.wu at intel.com>
> Subject: RE: [PATCH] net/i40e: do not turn on flexible payload on driver init
> 
> > -----Original Message-----
> > From: Rybalchenko, Kirill
> > Sent: Friday, December 1, 2017 11:27 PM
> > To: dev at dpdk.org
> > Cc: Rybalchenko, Kirill <kirill.rybalchenko at intel.com>; Chilikin,
> > Andrey <andrey.chilikin at intel.com>; Xing, Beilei
> > <beilei.xing at intel.com>; Wu, Jingjing <jingjing.wu at intel.com>
> > Subject: [PATCH] net/i40e: do not turn on flexible payload on driver
> > init
> >
> > Function i40e_GLQF_reg_init() overwrites global register for flexible
> > payload, forcing extraction of first 16 bytes of
> > L2/L3/L4 payload to the field vector even if flexible payload is not
> > used by an application. Such unconditional turn on of flexible payload
> > effectively disables ability to use outer IP Destination address for
> > RSS/FDIR for tunnelled packets, as flexible payload overwrites outer
> > IP destination address on the field vector.
> >
> > Now flexible payload turned on only when flow director is enabled and
> > configured.
> >
> > v1:
> > Global registers will be set only when payload is enabled.
> > They will be reset if payload is disabled or on port reset (uninit).
> >
> > Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko at intel.com>
> > ---
> >  drivers/net/i40e/i40e_ethdev.c | 32 +++++++++++++++++++++-----------
> > drivers/net/i40e/i40e_ethdev.h |  1 +
> >  drivers/net/i40e/i40e_fdir.c   |  1 +
> >  3 files changed, 23 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > b/drivers/net/i40e/i40e_ethdev.c index 811cc9f..d6a207f 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -701,17 +701,6 @@ RTE_PMD_REGISTER_KMOD_DEP(net_i40e, "*
> igb_uio |
> > uio_pci_generic | vfio-pci");  static inline void
> > i40e_GLQF_reg_init(struct i40e_hw *hw)  {
> >  	/*
> > -	 * Force global configuration for flexible payload
> > -	 * to the first 16 bytes of the corresponding L2/L3/L4 paylod.
> > -	 * This should be removed from code once proper
> > -	 * configuration API is added to avoid configuration conflicts
> > -	 * between ports of the same device.
> > -	 */
> > -	I40E_WRITE_REG(hw, I40E_GLQF_ORT(33), 0x000000E0);
> > -	I40E_WRITE_REG(hw, I40E_GLQF_ORT(34), 0x000000E3);
> > -	I40E_WRITE_REG(hw, I40E_GLQF_ORT(35), 0x000000E6);
> > -
> > -	/*
> >  	 * Initialize registers for parsing packet type of QinQ
> >  	 * This should be removed from code once proper
> >  	 * configuration API is added to avoid configuration conflicts @@ -
> > 1435,6 +1424,24 @@ i40e_rm_fdir_filter_list(struct i40e_pf *pf)
> >  	}
> >  }
> >
> > +void i40e_flex_payload_reg_cfg(struct i40e_hw *hw, bool enable) {
> > +	if (enable) {
> > +		/*
> > +		 * Set global configuration for flexible payload
> > +		 * to the first 16 bytes of the corresponding L2/L3/L4 paylod.
> > +		 */
> > +		I40E_WRITE_REG(hw, I40E_GLQF_ORT(33), 0x000000E0);
> > +		I40E_WRITE_REG(hw, I40E_GLQF_ORT(34), 0x000000E3);
> > +		I40E_WRITE_REG(hw, I40E_GLQF_ORT(35), 0x000000E6);
> > +	} else {
> > +		/* Disable flexible payload in global configuration */
> > +		I40E_WRITE_REG(hw, I40E_GLQF_ORT(33), 0x00000000);
> > +		I40E_WRITE_REG(hw, I40E_GLQF_ORT(34), 0x00000000);
> > +		I40E_WRITE_REG(hw, I40E_GLQF_ORT(35), 0x00000000);
> 
> I'm not sure if 0 is the default value for the three registers, just remind to
> check the value in FW first.
> 
> > +	}
> > +}
> > +
> >  static int
> >  eth_i40e_dev_uninit(struct rte_eth_dev *dev)  { @@ -1478,6 +1485,9 @@
> > eth_i40e_dev_uninit(struct rte_eth_dev *dev)
> >  	hw->fc.requested_mode = I40E_FC_NONE;
> >  	i40e_set_fc(hw, &aq_fail, TRUE);
> >
> > +	/* Disable flexible payload in global configuration */
> > +	i40e_flex_payload_reg_cfg(hw, false);
> > +
> 
> How about moving it to dev_close and also adding disable flexible payload in
> dev_init function?
> Guarantee flexible payload is disabled during the next launch if application
> quits in unexpected way.
> 
> >  	/* uninitialize pf host driver */
> >  	i40e_pf_host_uninit(dev);
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.h
> > b/drivers/net/i40e/i40e_ethdev.h index cd67453..2cbe9cb 100644
> > --- a/drivers/net/i40e/i40e_ethdev.h
> > +++ b/drivers/net/i40e/i40e_ethdev.h
> > @@ -1198,6 +1198,7 @@ int i40e_dcb_init_configure(struct rte_eth_dev
> > *dev, bool sw_dcb);  int i40e_flush_queue_region_all_conf(struct
> > rte_eth_dev *dev,
> >  		struct i40e_hw *hw, struct i40e_pf *pf, uint16_t on);  void
> > i40e_init_queue_region_conf(struct rte_eth_dev *dev);
> > +void i40e_flex_payload_reg_cfg(struct i40e_hw *hw, bool enable);
> >
> >  #define I40E_DEV_TO_PCI(eth_dev) \
> >  	RTE_DEV_TO_PCI((eth_dev)->device)
> > diff --git a/drivers/net/i40e/i40e_fdir.c
> > b/drivers/net/i40e/i40e_fdir.c index 3d7170d..0ae8fbd 100644
> > --- a/drivers/net/i40e/i40e_fdir.c
> > +++ b/drivers/net/i40e/i40e_fdir.c
> > @@ -671,6 +671,7 @@ i40e_fdir_configure(struct rte_eth_dev *dev)
> >  		return -EINVAL;
> >  	}
> >  	/* configure flex payload */
> > +	i40e_flex_payload_reg_cfg(hw, !!conf->nb_payloads);

Besides, I don't think it's the right place to configure flexible payload here. 
When use rte_flow API to create a FDIR flow with flexible payload, flow_director_flex_payload CLI is not needed, then the configuration will be failed to set.


> >  	for (i = 0; i < conf->nb_payloads; i++)
> >  		i40e_set_flx_pld_cfg(pf, &conf->flex_set[i]);
> >  	/* configure flex mask*/
> > --
> > 2.5.5