[dpdk-dev] [PATCH 0/6] next-build: create both static and shared libs
Bruce Richardson
bruce.richardson at intel.com
Fri Dec 15 13:02:15 CET 2017
On Wed, Dec 13, 2017 at 12:11:02PM +0000, Luca Boccassi wrote:
> On Tue, 2017-12-12 at 16:59 +0000, Bruce Richardson wrote:
> > This patchset changes the meson+ninja build system to always create
> > both
> > static and shared libraries when doing a build. The applications
> > compiled
> > as part of a build use either the shared or static libraries
> > depending on
> > what the default_library build setting is.
> >
> > NOTE:
> > The main difficulty with this change is adjusting the pkgconfig file
> > so
> > that external apps, like the examples, can be built using either the
> > static
> > or shared libraries. One of the key issues was the fact that running
> > "pkg-config --static --libs libdpdk" outputs first the normal libs,
> > and
> > then the extra static ones. This is a problem because the driver libs
> > are
> > for static only builds, but need to come before, not after the
> > standard
> > DDPK libraries. It also procludes adding in the -Wl,-Bstatic flag
> > into the output for the standard libraries to link them statically.
> >
> > There were two options considered for mananging the pkg-config
> > settings.
> > 1. Creating a separate .pc file for static builds with exactly the
> > flags
> > needed.
> > 2. Modifying the single .pc file so that it was "good enough" to
> > enable
> > static builds without too much work.
> >
> > For this version of this set, I took option #2. To link using dynamic
> > libs,
> > all is as normal, to use static libs, the user needs to prepend
> > "-Wl,-Bstatic" before the "pkgconfig --static" library output. This
> > can be
> > seen in the changes to the example application makefiles, which now
> > support
> > building the examples using shared or static DPDK libs.
> >
> > Bruce Richardson (6):
> > build: remove library special cases
> > eal: fix list of source files to meson build
> > build: build all libs and drivers as both static and shared
> > build: change default library type to static
> > build: symlink drivers to library directory
> > examples: enable linking examples both static and shared
> >
> > app/test-pmd/meson.build | 5 +-
> > buildtools/symlink-drivers-solibs.sh | 16 ++++
> > config/meson.build | 14 ++++
> > doc/guides/contributing/coding_style.rst | 9 +++
> > drivers/meson.build | 43 +++++++---
> > drivers/net/e1000/base/meson.build | 2 +-
> > drivers/net/fm10k/base/meson.build | 2 +-
> > drivers/net/i40e/base/meson.build | 2 +-
> > drivers/net/ixgbe/base/meson.build | 2 +-
> > examples/bond/Makefile | 21 +++--
> > examples/cmdline/Makefile | 21 +++--
> > examples/distributor/Makefile | 21 +++--
> > examples/eventdev_pipeline_sw_pmd/Makefile | 21 +++--
> > examples/exception_path/Makefile | 21 +++--
> > examples/flow_classify/Makefile | 21 +++--
> > examples/flow_filtering/Makefile | 21 +++--
> > examples/helloworld/Makefile | 21 +++--
> > examples/ip_fragmentation/Makefile | 21 +++--
> > examples/ip_pipeline/Makefile | 21 +++--
> > examples/ip_reassembly/Makefile | 21 +++--
> > examples/ipsec-secgw/Makefile | 21 +++--
> > examples/ipv4_multicast/Makefile | 21 +++--
> > examples/kni/Makefile | 21 +++--
> > examples/l2fwd-cat/Makefile | 21 +++--
> > examples/l2fwd-crypto/Makefile | 21 +++--
> > examples/l2fwd-jobstats/Makefile | 21 +++--
> > examples/l2fwd-keepalive/Makefile | 21 +++--
> > examples/l2fwd/Makefile | 21 +++--
> > examples/l3fwd-acl/Makefile | 21 +++--
> > examples/l3fwd-power/Makefile | 21 +++--
> > examples/l3fwd-vf/Makefile | 21 +++--
> > examples/l3fwd/Makefile | 21 +++--
> > examples/link_status_interrupt/Makefile | 21 +++--
> > examples/load_balancer/Makefile | 21 +++--
> > examples/meson.build | 2 +-
> > examples/packet_ordering/Makefile | 21 +++--
> > examples/ptpclient/Makefile | 21 +++--
> > examples/qos_meter/Makefile | 21 +++--
> > examples/qos_sched/Makefile | 21 +++--
> > examples/rxtx_callbacks/Makefile | 21 +++--
> > examples/service_cores/Makefile | 21 +++--
> > examples/skeleton/Makefile | 21 +++--
> > examples/tep_termination/Makefile | 21 +++--
> > examples/timer/Makefile | 21 +++--
> > examples/vhost/Makefile | 21 +++--
> > examples/vhost_scsi/Makefile | 21 +++--
> > examples/vmdq/Makefile | 21 +++--
> > examples/vmdq_dcb/Makefile | 21 +++--
> > lib/librte_eal/bsdapp/eal/meson.build | 34 +-------
> > lib/librte_eal/bsdapp/meson.build | 55 -------------
> > lib/librte_eal/common/arch/meson.build | 33 --------
> > lib/librte_eal/common/include/arch/meson.build | 33 --------
> > lib/librte_eal/common/include/meson.build | 71 -------------
> > ---
> > lib/librte_eal/common/meson.build | 74 ++++++++++++++-
> > --
> > lib/librte_eal/linuxapp/eal/meson.build | 36 +--------
> > lib/librte_eal/linuxapp/igb_uio/meson.build | 8 +-
> > lib/librte_eal/linuxapp/meson.build | 42 ----------
> > lib/librte_eal/meson.build | 45 +++++++++--
> > lib/meson.build | 107
> > ++++++++++++++++---------
> > meson.build | 31 ++++---
> > 60 files changed, 885 insertions(+), 579 deletions(-)
> > create mode 100644 buildtools/symlink-drivers-solibs.sh
> > delete mode 100644 lib/librte_eal/bsdapp/meson.build
> > delete mode 100644 lib/librte_eal/common/arch/meson.build
> > delete mode 100644 lib/librte_eal/common/include/arch/meson.build
> > delete mode 100644 lib/librte_eal/common/include/meson.build
> > delete mode 100644 lib/librte_eal/linuxapp/meson.build
> >
>
> Acked-by: Luca Boccassi <bluca at debian.org>
>
Pushed to dpdk-next-build.
[One change made from submitted patches in that the new file was added
with a traditional license header, rather than SPDX tag, given that the
format of the tags is not fully locked-down. Once that's settled, the
new file can be updated along with all the other meson build system
ones.]
/Bruce
More information about the dev
mailing list