[dpdk-dev] [PATCH v2 23/26] net/qede/base: semantic/formatting changes
Rasesh Mody
rasesh.mody at cavium.com
Thu Jan 5 08:04:05 CET 2017
This patch consists of semantic/formatting changes. It also includes
comment additions.
Signed-off-by: Rasesh Mody <rasesh.mody at cavium.com>
---
drivers/net/qede/base/common_hsi.h | 5 +-
drivers/net/qede/base/ecore_dev.c | 14 +-
drivers/net/qede/base/ecore_hsi_common.h | 14 +-
drivers/net/qede/base/ecore_hw.c | 4 +-
drivers/net/qede/base/ecore_init_ops.c | 4 +-
drivers/net/qede/base/ecore_int.c | 6 +-
drivers/net/qede/base/ecore_mcp.c | 5 +-
drivers/net/qede/base/ecore_spq.c | 3 +-
drivers/net/qede/base/ecore_sriov.c | 8 +-
drivers/net/qede/base/mcp_public.h | 262 ++++++++++++++----------------
10 files changed, 158 insertions(+), 167 deletions(-)
diff --git a/drivers/net/qede/base/common_hsi.h b/drivers/net/qede/base/common_hsi.h
index 4083e86..2f84148 100644
--- a/drivers/net/qede/base/common_hsi.h
+++ b/drivers/net/qede/base/common_hsi.h
@@ -721,8 +721,7 @@ union event_ring_data {
u8 bytes[8] /* Byte Array */;
struct vf_pf_channel_eqe_data vf_pf_channel /* VF-PF Channel data */;
struct iscsi_eqe_data iscsi_info /* Dedicated fields to iscsi data */;
- /* Dedicated field for RoCE affiliated asynchronous error */;
- struct regpair roceHandle;
+ struct regpair roceHandle /* Dedicated field for RDMA data */;
struct malicious_vf_eqe_data malicious_vf /* Malicious VF data */;
struct initial_cleanup_eqe_data vf_init_cleanup
/* VF Initial Cleanup data */;
@@ -766,6 +765,8 @@ enum protocol_type {
MAX_PROTOCOL_TYPE
};
+
+
/*
* Ustorm Queue Zone
*/
diff --git a/drivers/net/qede/base/ecore_dev.c b/drivers/net/qede/base/ecore_dev.c
index 15db09f..f7a36c9 100644
--- a/drivers/net/qede/base/ecore_dev.c
+++ b/drivers/net/qede/base/ecore_dev.c
@@ -1623,7 +1623,8 @@ enum _ecore_status_t ecore_hw_init(struct ecore_dev *p_dev,
u32 load_code, param;
int i;
- if (p_params->int_mode == ECORE_INT_MODE_MSI && p_dev->num_hwfns > 1) {
+ if ((p_params->int_mode == ECORE_INT_MODE_MSI) &&
+ (p_dev->num_hwfns > 1)) {
DP_NOTICE(p_dev, false,
"MSI mode is not supported for CMT devices\n");
return ECORE_INVAL;
@@ -2937,8 +2938,9 @@ void ecore_prepare_hibernate(struct ecore_dev *p_dev)
#endif
static enum _ecore_status_t
-ecore_hw_prepare_single(struct ecore_hwfn *p_hwfn, void OSAL_IOMEM *p_regview,
- void OSAL_IOMEM *p_doorbells,
+ecore_hw_prepare_single(struct ecore_hwfn *p_hwfn,
+ void OSAL_IOMEM * p_regview,
+ void OSAL_IOMEM * p_doorbells,
struct ecore_hw_prepare_params *p_params)
{
struct ecore_dev *p_dev = p_hwfn->p_dev;
@@ -3280,8 +3282,8 @@ ecore_chain_alloc_next_ptr(struct ecore_dev *p_dev, struct ecore_chain *p_chain)
static enum _ecore_status_t
ecore_chain_alloc_single(struct ecore_dev *p_dev, struct ecore_chain *p_chain)
{
- void *p_virt = OSAL_NULL;
dma_addr_t p_phys = 0;
+ void *p_virt = OSAL_NULL;
p_virt = OSAL_DMA_ALLOC_COHERENT(p_dev, &p_phys, ECORE_CHAIN_PAGE_SIZE);
if (!p_virt) {
@@ -3809,10 +3811,10 @@ enum _ecore_status_t ecore_set_rxq_coalesce(struct ecore_hwfn *p_hwfn,
u16 coalesce, u8 qid, u16 sb_id)
{
struct ustorm_eth_queue_zone eth_qzone;
+ u8 timeset, timer_res;
u16 fw_qid = 0;
u32 address;
enum _ecore_status_t rc;
- u8 timeset, timer_res;
/* Coalesce = (timeset << timer-resolution), timeset is 7bit wide */
if (coalesce <= 0x7F) {
@@ -3852,10 +3854,10 @@ enum _ecore_status_t ecore_set_txq_coalesce(struct ecore_hwfn *p_hwfn,
u16 coalesce, u8 qid, u16 sb_id)
{
struct xstorm_eth_queue_zone eth_qzone;
+ u8 timeset, timer_res;
u16 fw_qid = 0;
u32 address;
enum _ecore_status_t rc;
- u8 timeset, timer_res;
/* Coalesce = (timeset << timer-resolution), timeset is 7bit wide */
if (coalesce <= 0x7F) {
diff --git a/drivers/net/qede/base/ecore_hsi_common.h b/drivers/net/qede/base/ecore_hsi_common.h
index 6ddbe1a..d978bb0 100644
--- a/drivers/net/qede/base/ecore_hsi_common.h
+++ b/drivers/net/qede/base/ecore_hsi_common.h
@@ -1320,9 +1320,13 @@ enum personality_type {
* tunnel configuration
*/
struct pf_start_tunnel_config {
-/* Set VXLAN tunnel UDP destination port. */
+/* Set VXLAN tunnel UDP destination port to vxlan_udp_port. If not set -
+ * FW will use a default port
+ */
u8 set_vxlan_udp_port_flg;
-/* Set GENEVE tunnel UDP destination port. */
+/* Set GENEVE tunnel UDP destination port to geneve_udp_port. If not set -
+ * FW will use a default port
+ */
u8 set_geneve_udp_port_flg;
u8 tx_enable_vxlan /* If set, enable VXLAN tunnel in TX path. */;
/* If set, enable l2 GENEVE tunnel in TX path. */
@@ -1338,8 +1342,10 @@ struct pf_start_tunnel_config {
u8 tunnel_clss_ipgeneve;
u8 tunnel_clss_l2gre /* Classification scheme for l2 GRE tunnel. */;
u8 tunnel_clss_ipgre /* Classification scheme for ip GRE tunnel. */;
- __le16 vxlan_udp_port /* VXLAN tunnel UDP destination port. */;
- __le16 geneve_udp_port /* GENEVE tunnel UDP destination port. */;
+/* VXLAN tunnel UDP destination port. Valid if set_vxlan_udp_port_flg=1 */
+ __le16 vxlan_udp_port;
+/* GENEVE tunnel UDP destination port. Valid if set_geneve_udp_port_flg=1 */
+ __le16 geneve_udp_port;
};
/*
diff --git a/drivers/net/qede/base/ecore_hw.c b/drivers/net/qede/base/ecore_hw.c
index 8abe60a..22da415 100644
--- a/drivers/net/qede/base/ecore_hw.c
+++ b/drivers/net/qede/base/ecore_hw.c
@@ -496,8 +496,8 @@ static u32 ecore_dmae_idx_to_go_cmd(u8 idx)
return DMAE_REG_GO_C0 + (idx << 2);
}
-static enum _ecore_status_t
-ecore_dmae_post_command(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt)
+static enum _ecore_status_t ecore_dmae_post_command(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt)
{
struct dmae_cmd *p_command = p_hwfn->dmae_info.p_dmae_cmd;
u8 idx_cmd = p_hwfn->dmae_info.channel, i;
diff --git a/drivers/net/qede/base/ecore_init_ops.c b/drivers/net/qede/base/ecore_init_ops.c
index faeca68..a6ed590 100644
--- a/drivers/net/qede/base/ecore_init_ops.c
+++ b/drivers/net/qede/base/ecore_init_ops.c
@@ -63,8 +63,8 @@ static enum _ecore_status_t ecore_init_rt(struct ecore_hwfn *p_hwfn,
{
u32 *p_init_val = &p_hwfn->rt_data.init_val[rt_offset];
bool *p_valid = &p_hwfn->rt_data.b_valid[rt_offset];
- enum _ecore_status_t rc = ECORE_SUCCESS;
u16 i, segment;
+ enum _ecore_status_t rc = ECORE_SUCCESS;
/* Since not all RT entries are initialized, go over the RT and
* for each segment of initialized values use DMA.
@@ -452,10 +452,10 @@ enum _ecore_status_t ecore_init_run(struct ecore_hwfn *p_hwfn,
int phase, int phase_id, int modes)
{
struct ecore_dev *p_dev = p_hwfn->p_dev;
- enum _ecore_status_t rc = ECORE_SUCCESS;
u32 cmd_num, num_init_ops;
union init_op *init_ops;
bool b_dmae = false;
+ enum _ecore_status_t rc = ECORE_SUCCESS;
num_init_ops = p_dev->fw_data->init_ops_size;
init_ops = p_dev->fw_data->init_ops;
diff --git a/drivers/net/qede/base/ecore_int.c b/drivers/net/qede/base/ecore_int.c
index 6fb037d..96f283b 100644
--- a/drivers/net/qede/base/ecore_int.c
+++ b/drivers/net/qede/base/ecore_int.c
@@ -1234,7 +1234,7 @@ static enum _ecore_status_t ecore_int_sb_attn_alloc(struct ecore_hwfn *p_hwfn,
p_sb = OSAL_ALLOC(p_dev, GFP_KERNEL, sizeof(*p_sb));
if (!p_sb) {
DP_NOTICE(p_dev, true,
- "Failed to allocate `struct ecore_sb_attn_info'");
+ "Failed to allocate `struct ecore_sb_attn_info'\n");
return ECORE_NOMEM;
}
@@ -1243,7 +1243,7 @@ static enum _ecore_status_t ecore_int_sb_attn_alloc(struct ecore_hwfn *p_hwfn,
SB_ATTN_ALIGNED_SIZE(p_hwfn));
if (!p_virt) {
DP_NOTICE(p_dev, true,
- "Failed to allocate status block (attentions)");
+ "Failed to allocate status block (attentions)\n");
OSAL_FREE(p_dev, p_sb);
return ECORE_NOMEM;
}
@@ -2127,8 +2127,8 @@ enum _ecore_status_t ecore_int_set_timer_res(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u8 timer_res, u16 sb_id, bool tx)
{
- enum _ecore_status_t rc;
struct cau_sb_entry sb_entry;
+ enum _ecore_status_t rc;
if (!p_hwfn->hw_init_done) {
DP_ERR(p_hwfn, "hardware not initialized yet\n");
diff --git a/drivers/net/qede/base/ecore_mcp.c b/drivers/net/qede/base/ecore_mcp.c
index e641a77..bb13828 100644
--- a/drivers/net/qede/base/ecore_mcp.c
+++ b/drivers/net/qede/base/ecore_mcp.c
@@ -945,9 +945,8 @@ static void ecore_mcp_send_protocol_stats(struct ecore_hwfn *p_hwfn,
ecore_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params);
}
-static void
-ecore_read_pf_bandwidth(struct ecore_hwfn *p_hwfn,
- struct public_func *p_shmem_info)
+static void ecore_read_pf_bandwidth(struct ecore_hwfn *p_hwfn,
+ struct public_func *p_shmem_info)
{
struct ecore_mcp_function_info *p_info;
diff --git a/drivers/net/qede/base/ecore_spq.c b/drivers/net/qede/base/ecore_spq.c
index e371492..9f5fdf8 100644
--- a/drivers/net/qede/base/ecore_spq.c
+++ b/drivers/net/qede/base/ecore_spq.c
@@ -380,8 +380,7 @@ struct ecore_eq *ecore_eq_alloc(struct ecore_hwfn *p_hwfn, u16 num_elem)
}
/* register EQ completion on the SP SB */
- ecore_int_register_cb(p_hwfn,
- ecore_eq_completion,
+ ecore_int_register_cb(p_hwfn, ecore_eq_completion,
p_eq, &p_eq->eq_sb_index, &p_eq->p_fw_cons);
return p_eq;
diff --git a/drivers/net/qede/base/ecore_sriov.c b/drivers/net/qede/base/ecore_sriov.c
index e8f1ebe..4c1a078 100644
--- a/drivers/net/qede/base/ecore_sriov.c
+++ b/drivers/net/qede/base/ecore_sriov.c
@@ -1675,11 +1675,9 @@ ecore_iov_reconfigure_unicast_vlan(struct ecore_hwfn *p_hwfn,
DP_VERBOSE(p_hwfn, ECORE_MSG_IOV,
"Reconfiguring VLAN [0x%04x] for VF [%04x]\n",
filter.vlan, p_vf->relative_vf_id);
- rc = ecore_sp_eth_filter_ucast(p_hwfn,
- p_vf->opaque_fid,
- &filter,
- ECORE_SPQ_MODE_CB,
- OSAL_NULL);
+ rc = ecore_sp_eth_filter_ucast(p_hwfn, p_vf->opaque_fid,
+ &filter, ECORE_SPQ_MODE_CB,
+ OSAL_NULL);
if (rc) {
DP_NOTICE(p_hwfn, true,
"Failed to configure VLAN [%04x]"
diff --git a/drivers/net/qede/base/mcp_public.h b/drivers/net/qede/base/mcp_public.h
index b8a9ae3..81567d1 100644
--- a/drivers/net/qede/base/mcp_public.h
+++ b/drivers/net/qede/base/mcp_public.h
@@ -584,23 +584,20 @@ struct public_port {
#define MCP_VALIDITY_ACTIVE_MFW_NONE 0x000001c0
u32 link_status;
-#define LINK_STATUS_LINK_UP 0x00000001
-#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001e
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (1 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (2 << 1)
+#define LINK_STATUS_LINK_UP 0x00000001
+#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001e
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (1 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (2 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_10G (3 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_20G (4 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_40G (5 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_50G (6 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_100G (7 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_25G (8 << 1)
-
-#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
-
-#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
-#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
-
-#define LINK_STATUS_PFC_ENABLED 0x00000100
+#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
+#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
+#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
+#define LINK_STATUS_PFC_ENABLED 0x00000100
#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200
#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400
#define LINK_STATUS_LINK_PARTNER_10G_CAPABLE 0x00000800
@@ -609,22 +606,19 @@ struct public_port {
#define LINK_STATUS_LINK_PARTNER_50G_CAPABLE 0x00004000
#define LINK_STATUS_LINK_PARTNER_100G_CAPABLE 0x00008000
#define LINK_STATUS_LINK_PARTNER_25G_CAPABLE 0x00010000
-
#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
-#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0 << 18)
-#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1 << 18)
-#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2 << 18)
+#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0 << 18)
+#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1 << 18)
+#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2 << 18)
#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3 << 18)
-
-#define LINK_STATUS_SFP_TX_FAULT 0x00100000
-#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00200000
-#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00400000
-#define LINK_STATUS_RX_SIGNAL_PRESENT 0x00800000
-#define LINK_STATUS_MAC_LOCAL_FAULT 0x01000000
-#define LINK_STATUS_MAC_REMOTE_FAULT 0x02000000
-#define LINK_STATUS_UNSUPPORTED_SPD_REQ 0x04000000
-
-#define LINK_STATUS_FEC_MODE_MASK 0x38000000
+#define LINK_STATUS_SFP_TX_FAULT 0x00100000
+#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00200000
+#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00400000
+#define LINK_STATUS_RX_SIGNAL_PRESENT 0x00800000
+#define LINK_STATUS_MAC_LOCAL_FAULT 0x01000000
+#define LINK_STATUS_MAC_REMOTE_FAULT 0x02000000
+#define LINK_STATUS_UNSUPPORTED_SPD_REQ 0x04000000
+#define LINK_STATUS_FEC_MODE_MASK 0x38000000
#define LINK_STATUS_FEC_MODE_NONE (0 << 27)
#define LINK_STATUS_FEC_MODE_FIRECODE_CL74 (1 << 27)
#define LINK_STATUS_FEC_MODE_RS_CL91 (2 << 27)
@@ -686,45 +680,47 @@ struct public_port {
u32 fc_npiv_nvram_tbl_addr;
u32 fc_npiv_nvram_tbl_size;
u32 transceiver_data;
-#define ETH_TRANSCEIVER_STATE_MASK 0x000000FF
-#define ETH_TRANSCEIVER_STATE_SHIFT 0x00000000
-#define ETH_TRANSCEIVER_STATE_UNPLUGGED 0x00000000
-#define ETH_TRANSCEIVER_STATE_PRESENT 0x00000001
-#define ETH_TRANSCEIVER_STATE_VALID 0x00000003
-#define ETH_TRANSCEIVER_STATE_UPDATING 0x00000008
-#define ETH_TRANSCEIVER_TYPE_MASK 0x0000FF00
-#define ETH_TRANSCEIVER_TYPE_SHIFT 0x00000008
-#define ETH_TRANSCEIVER_TYPE_NONE 0x00000000
-#define ETH_TRANSCEIVER_TYPE_UNKNOWN 0x000000FF
+#define ETH_TRANSCEIVER_STATE_MASK 0x000000FF
+#define ETH_TRANSCEIVER_STATE_SHIFT 0x00000000
+#define ETH_TRANSCEIVER_STATE_UNPLUGGED 0x00000000
+#define ETH_TRANSCEIVER_STATE_PRESENT 0x00000001
+#define ETH_TRANSCEIVER_STATE_VALID 0x00000003
+#define ETH_TRANSCEIVER_STATE_UPDATING 0x00000008
+#define ETH_TRANSCEIVER_TYPE_MASK 0x0000FF00
+#define ETH_TRANSCEIVER_TYPE_SHIFT 0x00000008
+#define ETH_TRANSCEIVER_TYPE_NONE 0x00000000
+#define ETH_TRANSCEIVER_TYPE_UNKNOWN 0x000000FF
/* 1G Passive copper cable */
-#define ETH_TRANSCEIVER_TYPE_1G_PCC 0x01
+#define ETH_TRANSCEIVER_TYPE_1G_PCC 0x01
/* 1G Active copper cable */
-#define ETH_TRANSCEIVER_TYPE_1G_ACC 0x02
-#define ETH_TRANSCEIVER_TYPE_1G_LX 0x03
-#define ETH_TRANSCEIVER_TYPE_1G_SX 0x04
-#define ETH_TRANSCEIVER_TYPE_10G_SR 0x05
-#define ETH_TRANSCEIVER_TYPE_10G_LR 0x06
-#define ETH_TRANSCEIVER_TYPE_10G_LRM 0x07
-#define ETH_TRANSCEIVER_TYPE_10G_ER 0x08
+#define ETH_TRANSCEIVER_TYPE_1G_ACC 0x02
+#define ETH_TRANSCEIVER_TYPE_1G_LX 0x03
+#define ETH_TRANSCEIVER_TYPE_1G_SX 0x04
+#define ETH_TRANSCEIVER_TYPE_10G_SR 0x05
+#define ETH_TRANSCEIVER_TYPE_10G_LR 0x06
+#define ETH_TRANSCEIVER_TYPE_10G_LRM 0x07
+#define ETH_TRANSCEIVER_TYPE_10G_ER 0x08
/* 10G Passive copper cable */
-#define ETH_TRANSCEIVER_TYPE_10G_PCC 0x09
+#define ETH_TRANSCEIVER_TYPE_10G_PCC 0x09
/* 10G Active copper cable */
-#define ETH_TRANSCEIVER_TYPE_10G_ACC 0x0a
-#define ETH_TRANSCEIVER_TYPE_XLPPI 0x0b
-#define ETH_TRANSCEIVER_TYPE_40G_LR4 0x0c
-#define ETH_TRANSCEIVER_TYPE_40G_SR4 0x0d
-#define ETH_TRANSCEIVER_TYPE_40G_CR4 0x0e
-#define ETH_TRANSCEIVER_TYPE_100G_AOC 0x0f /* Active optical cable */
-#define ETH_TRANSCEIVER_TYPE_100G_SR4 0x10
-#define ETH_TRANSCEIVER_TYPE_100G_LR4 0x11
-#define ETH_TRANSCEIVER_TYPE_100G_ER4 0x12
-#define ETH_TRANSCEIVER_TYPE_100G_ACC 0x13 /* Active copper cable */
-#define ETH_TRANSCEIVER_TYPE_100G_CR4 0x14
-#define ETH_TRANSCEIVER_TYPE_4x10G_SR 0x15
+#define ETH_TRANSCEIVER_TYPE_10G_ACC 0x0a
+#define ETH_TRANSCEIVER_TYPE_XLPPI 0x0b
+#define ETH_TRANSCEIVER_TYPE_40G_LR4 0x0c
+#define ETH_TRANSCEIVER_TYPE_40G_SR4 0x0d
+#define ETH_TRANSCEIVER_TYPE_40G_CR4 0x0e
+/* Active optical cable */
+#define ETH_TRANSCEIVER_TYPE_100G_AOC 0x0f
+#define ETH_TRANSCEIVER_TYPE_100G_SR4 0x10
+#define ETH_TRANSCEIVER_TYPE_100G_LR4 0x11
+#define ETH_TRANSCEIVER_TYPE_100G_ER4 0x12
+/* Active copper cable */
+#define ETH_TRANSCEIVER_TYPE_100G_ACC 0x13
+#define ETH_TRANSCEIVER_TYPE_100G_CR4 0x14
+#define ETH_TRANSCEIVER_TYPE_4x10G_SR 0x15
/* 25G Passive copper cable - short */
-#define ETH_TRANSCEIVER_TYPE_25G_CA_N 0x16
+#define ETH_TRANSCEIVER_TYPE_25G_CA_N 0x16
/* 25G Active copper cable - short */
-#define ETH_TRANSCEIVER_TYPE_25G_ACC_S 0x17
+#define ETH_TRANSCEIVER_TYPE_25G_ACC_S 0x17
/* 25G Passive copper cable - medium */
#define ETH_TRANSCEIVER_TYPE_25G_CA_S 0x18
/* 25G Active copper cable - medium */
@@ -1153,6 +1149,23 @@ struct public_drv_mb {
* MCP_REG_CPU_STATE/MCP_REG_CPU_MODE registers.
*/
#define DRV_MSG_CODE_MCP_HALT 0x00100000
+/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
+ * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
+ */
+#define DRV_MSG_CODE_SET_VMAC 0x00110000
+/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
+ * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
+ */
+#define DRV_MSG_CODE_GET_VMAC 0x00120000
+ #define DRV_MSG_CODE_VMAC_TYPE_MAC 1
+ #define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
+ #define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
+/* Get statistics from pf, params [31:4] - reserved, [3:0] - stats type */
+#define DRV_MSG_CODE_GET_STATS 0x00130000
+ #define DRV_MSG_CODE_STATS_TYPE_LAN 1
+ #define DRV_MSG_CODE_STATS_TYPE_FCOE 2
+ #define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
+ #define DRV_MSG_CODE_STATS_TYPE_RDMA 4
/* Host shall provide buffer and size for MFW */
#define DRV_MSG_CODE_PMD_DIAG_DUMP 0x00140000
/* Host shall provide buffer and size for MFW */
@@ -1165,29 +1178,8 @@ struct public_drv_mb {
* [16:31] - offset
*/
#define DRV_MSG_CODE_TRANSCEIVER_WRITE 0x00170000
-
-/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
- * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
- */
-#define DRV_MSG_CODE_SET_VMAC 0x00110000
-/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
- * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
- */
-#define DRV_MSG_CODE_GET_VMAC 0x00120000
-#define DRV_MSG_CODE_VMAC_TYPE_MAC 1
-#define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
-#define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
-
-/* Get statistics from pf, params [31:4] - reserved, [3:0] - stats type */
-#define DRV_MSG_CODE_GET_STATS 0x00130000
-#define DRV_MSG_CODE_STATS_TYPE_LAN 1
-#define DRV_MSG_CODE_STATS_TYPE_FCOE 2
-#define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
-#define DRV_MSG_CODE_STATS_TYPE_RDMA 4
-
/* indicate OCBB related information */
#define DRV_MSG_CODE_OCBB_DATA 0x00180000
-
/* Set function BW, params[15:8] - min, params[7:0] - max */
#define DRV_MSG_CODE_SET_BW 0x00190000
#define BW_MAX_MASK 0x000000ff
@@ -1201,16 +1193,12 @@ struct public_drv_mb {
#define DRV_MSG_CODE_MASK_PARITIES 0x001a0000
/* param[0] - Simulate fan failure, param[1] - simulate over temp. */
#define DRV_MSG_CODE_INDUCE_FAILURE 0x001b0000
-#define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
-#define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
-
+ #define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
+ #define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
/* Param: [0:15] - gpio number */
#define DRV_MSG_CODE_GPIO_READ 0x001c0000
/* Param: [0:15] - gpio number, [16:31] - gpio value */
#define DRV_MSG_CODE_GPIO_WRITE 0x001d0000
-/* Param: [0:15] - gpio number */
-#define DRV_MSG_CODE_GPIO_INFO 0x00270000
-
/* Param: [0:7] - test enum, [8:15] - image index, [16:31] - reserved */
#define DRV_MSG_CODE_BIST_TEST 0x001e0000
#define DRV_MSG_CODE_GET_TEMPERATURE 0x001f0000
@@ -1227,55 +1215,53 @@ struct public_drv_mb {
* param[15:8] - age
*/
#define DRV_MSG_CODE_RESOURCE_CMD 0x00230000
-
-/* request resource ownership with default aging */
-#define RESOURCE_OPCODE_REQ 1
-/* request resource ownership without aging */
-#define RESOURCE_OPCODE_REQ_WO_AGING 2
-/* request resource ownership with specific aging timer (in seconds) */
-#define RESOURCE_OPCODE_REQ_W_AGING 3
-#define RESOURCE_OPCODE_RELEASE 4 /* release resource */
-#define RESOURCE_OPCODE_FORCE_RELEASE 5 /* force resource release */
-
-/* resource is free and granted to requester */
-#define RESOURCE_OPCODE_GNT 1
-/* resource is busy, param[7:0] indicates owner as follow 0-15 = PF0-15,
- * 16 = MFW, 17 = diag over serial
- */
-#define RESOURCE_OPCODE_BUSY 2
-/* indicate release request was acknowledged */
-#define RESOURCE_OPCODE_RELEASED 3
-/* indicate release request was previously received by other owner */
-#define RESOURCE_OPCODE_RELEASED_PREVIOUS 4
-/* indicate wrong owner during release */
-#define RESOURCE_OPCODE_WRONG_OWNER 5
-#define RESOURCE_OPCODE_UNKNOWN_CMD 255
-/* dedicate resource 0 for dump */
-#define RESOURCE_DUMP (1 << 0)
-
+ /* request resource ownership with default aging */
+ #define RESOURCE_OPCODE_REQ 1
+ /* request resource ownership without aging */
+ #define RESOURCE_OPCODE_REQ_WO_AGING 2
+ /* request resource ownership with specific aging timer (in seconds) */
+ #define RESOURCE_OPCODE_REQ_W_AGING 3
+ #define RESOURCE_OPCODE_RELEASE 4 /* release resource */
+ /* force resource release */
+ #define RESOURCE_OPCODE_FORCE_RELEASE 5
+ /* resource is free and granted to requester */
+ #define RESOURCE_OPCODE_GNT 1
+ /* resource is busy, param[7:0] indicates owner as follow 0-15 = PF0-15,
+ * 16 = MFW, 17 = diag over serial
+ */
+ #define RESOURCE_OPCODE_BUSY 2
+ /* indicate release request was acknowledged */
+ #define RESOURCE_OPCODE_RELEASED 3
+ /* indicate release request was previously received by other owner */
+ #define RESOURCE_OPCODE_RELEASED_PREVIOUS 4
+ /* indicate wrong owner during release */
+ #define RESOURCE_OPCODE_WRONG_OWNER 5
+ #define RESOURCE_OPCODE_UNKNOWN_CMD 255
+ /* dedicate resource 0 for dump */
+ #define RESOURCE_DUMP (1 << 0)
#define DRV_MSG_CODE_GET_MBA_VERSION 0x00240000 /* Get MBA version */
-
/* Send crash dump commands with param[3:0] - opcode */
#define DRV_MSG_CODE_MDUMP_CMD 0x00250000
-#define MDUMP_DRV_PARAM_OPCODE_MASK 0x0000000f
-/* acknowledge reception of error indication */
-#define DRV_MSG_CODE_MDUMP_ACK 0x01
-/* set epoc and personality as follow: drv_data[3:0] - epoch,
- * drv_data[7:4] - personality
- */
-#define DRV_MSG_CODE_MDUMP_SET_VALUES 0x02
-/* trigger crash dump procedure */
-#define DRV_MSG_CODE_MDUMP_TRIGGER 0x03
-/* Request valid logs and config words */
-#define DRV_MSG_CODE_MDUMP_GET_CONFIG 0x04
-/* Set triggers mask. drv_mb_param should indicate (bitwise) which trigger
- * enabled
- */
-#define DRV_MSG_CODE_MDUMP_SET_ENABLE 0x05
-#define DRV_MSG_CODE_MDUMP_CLEAR_LOGS 0x06 /* Clear all logs */
-
-
+ #define MDUMP_DRV_PARAM_OPCODE_MASK 0x0000000f
+ /* acknowledge reception of error indication */
+ #define DRV_MSG_CODE_MDUMP_ACK 0x01
+ /* set epoc and personality as follow: drv_data[3:0] - epoch,
+ * drv_data[7:4] - personality
+ */
+ #define DRV_MSG_CODE_MDUMP_SET_VALUES 0x02
+ /* trigger crash dump procedure */
+ #define DRV_MSG_CODE_MDUMP_TRIGGER 0x03
+ /* Request valid logs and config words */
+ #define DRV_MSG_CODE_MDUMP_GET_CONFIG 0x04
+ /* Set triggers mask. drv_mb_param should indicate (bitwise) which
+ * trigger enabled
+ */
+ #define DRV_MSG_CODE_MDUMP_SET_ENABLE 0x05
+ /* Clear all logs */
+ #define DRV_MSG_CODE_MDUMP_CLEAR_LOGS 0x06
#define DRV_MSG_CODE_MEM_ECC_EVENTS 0x00260000 /* Param: None */
+/* Param: [0:15] - gpio number */
+#define DRV_MSG_CODE_GPIO_INFO 0x00270000
/* Value will be placed in union */
#define DRV_MSG_CODE_EXT_PHY_READ 0x00280000
/* Value should be placed in union */
@@ -1502,22 +1488,22 @@ struct public_drv_mb {
#define FW_MSG_MODE_PHY_PRIVILEGE_ERROR 0x00150000
#define FW_MSG_CODE_OK 0x00160000
#define FW_MSG_CODE_LED_MODE_INVALID 0x00170000
-#define FW_MSG_CODE_PHY_DIAG_OK 0x00160000
-#define FW_MSG_CODE_PHY_DIAG_ERROR 0x00170000
+#define FW_MSG_CODE_PHY_DIAG_OK 0x00160000
+#define FW_MSG_CODE_PHY_DIAG_ERROR 0x00170000
#define FW_MSG_CODE_INIT_HW_FAILED_TO_ALLOCATE_PAGE 0x00040000
#define FW_MSG_CODE_INIT_HW_FAILED_BAD_STATE 0x00170000
#define FW_MSG_CODE_INIT_HW_FAILED_TO_SET_WINDOW 0x000d0000
#define FW_MSG_CODE_INIT_HW_FAILED_NO_IMAGE 0x000c0000
#define FW_MSG_CODE_INIT_HW_FAILED_VERSION_MISMATCH 0x00100000
-#define FW_MSG_CODE_TRANSCEIVER_DIAG_OK 0x00160000
-#define FW_MSG_CODE_TRANSCEIVER_DIAG_ERROR 0x00170000
+#define FW_MSG_CODE_TRANSCEIVER_DIAG_OK 0x00160000
+#define FW_MSG_CODE_TRANSCEIVER_DIAG_ERROR 0x00170000
#define FW_MSG_CODE_TRANSCEIVER_NOT_PRESENT 0x00020000
-#define FW_MSG_CODE_TRANSCEIVER_BAD_BUFFER_SIZE 0x000f0000
-#define FW_MSG_CODE_GPIO_OK 0x00160000
-#define FW_MSG_CODE_GPIO_DIRECTION_ERR 0x00170000
+#define FW_MSG_CODE_TRANSCEIVER_BAD_BUFFER_SIZE 0x000f0000
+#define FW_MSG_CODE_GPIO_OK 0x00160000
+#define FW_MSG_CODE_GPIO_DIRECTION_ERR 0x00170000
#define FW_MSG_CODE_GPIO_CTRL_ERR 0x00020000
#define FW_MSG_CODE_GPIO_INVALID 0x000f0000
-#define FW_MSG_CODE_GPIO_INVALID_VALUE 0x00050000
+#define FW_MSG_CODE_GPIO_INVALID_VALUE 0x00050000
#define FW_MSG_CODE_BIST_TEST_INVALID 0x000f0000
#define FW_MSG_CODE_EXTPHY_INVALID_IMAGE_HEADER 0x00700000
#define FW_MSG_CODE_EXTPHY_INVALID_PHY_TYPE 0x00710000
--
1.7.10.3
More information about the dev
mailing list