[dpdk-dev] [PATCH v2 28/34] doc: describe the new eventdev test application

Jerin Jacob jerin.jacob at caviumnetworks.com
Mon Jul 3 21:13:56 CEST 2017


From: Guduri Prathyusha <gprathyusha at caviumnetworks.com>

Add documentation to describe usage of eventdev test application and
supported command line arguments.

CC: John McNamara <john.mcnamara at intel.com>
Signed-off-by: Guduri Prathyusha <gprathyusha at caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob at caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren at intel.com>
Acked-by: John McNamara <john.mcnamara at intel.com>
---
 doc/guides/tools/index.rst        |   2 +-
 doc/guides/tools/testeventdev.rst | 152 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 153 insertions(+), 1 deletion(-)
 create mode 100644 doc/guides/tools/testeventdev.rst

diff --git a/doc/guides/tools/index.rst b/doc/guides/tools/index.rst
index 6dc5d202a..c9133ec84 100644
--- a/doc/guides/tools/index.rst
+++ b/doc/guides/tools/index.rst
@@ -40,4 +40,4 @@ DPDK Tools User Guides
     pmdinfo
     devbind
     cryptoperf
-
+    testeventdev
diff --git a/doc/guides/tools/testeventdev.rst b/doc/guides/tools/testeventdev.rst
new file mode 100644
index 000000000..f8240e7ba
--- /dev/null
+++ b/doc/guides/tools/testeventdev.rst
@@ -0,0 +1,152 @@
+..  BSD LICENSE
+    Copyright(c) 2017 Cavium. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Cavium nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+dpdk-test-eventdev Application
+==============================
+
+The ``dpdk-test-eventdev`` tool is a Data Plane Development Kit (DPDK)
+application that allows exercising various eventdev use cases.
+This application has a generic framework to add new eventdev based test cases to
+verify functionality and measure the performance parameters of DPDK eventdev
+devices.
+
+Compiling the Application
+-------------------------
+
+**Build the application**
+
+Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the
+``dpdk-test-eventdev`` application.
+
+Initially, the user must select a DPDK target to choose the correct target type
+and compiler options to use when building the libraries.
+The user must have all libraries, modules, updates and compilers installed
+in the system prior to this,
+as described in the earlier chapters in this Getting Started Guide.
+
+Running the Application
+-----------------------
+
+The application has a number of command line options:
+
+.. code-block:: console
+
+   dpdk-test-eventdev [EAL Options] -- [application options]
+
+EAL Options
+~~~~~~~~~~~
+
+The following are the EAL command-line options that can be used in conjunction
+with the ``dpdk-test-eventdev`` application.
+See the DPDK Getting Started Guides for more information on these options.
+
+*   ``-c <COREMASK>`` or ``-l <CORELIST>``
+
+        Set the hexadecimal bitmask of the cores to run on. The corelist is a
+        list of cores to use.
+
+*   ``--vdev <driver><id>``
+
+        Add a virtual eventdev device.
+
+Application Options
+~~~~~~~~~~~~~~~~~~~
+
+The following are the application command-line options:
+
+* ``--verbose``
+
+        Set verbose level. Default is 1. Value > 1 displays more details.
+
+* ``--dev <n>``
+
+        Set the device id of the event device.
+
+* ``--test <name>``
+
+        Set test name, where ``name`` is one of the following::
+
+         order_queue
+         order_atq
+         perf_queue
+         perf_atq
+
+* ``--socket_id <n>``
+
+        Set the socket id of the application resources.
+
+* ``--pool-sz <n>``
+
+        Set the number of mbufs to be allocated from the mempool.
+
+* ``--slcore <n>``
+
+        Set the scheduler lcore id.(Valid when eventdev is not RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED capable)
+
+* ``--plcores <CORELIST>``
+
+        Set the list of cores to be used as producers.
+
+* ``--wlcores <CORELIST>``
+
+        Set the list of cores to be used as workers.
+
+* ``--stlist <type_list>``
+
+        Set the scheduled type of each stage where ``type_list`` size
+        determines the number of stages used in the test application.
+        Each type_list member can be one of the following::
+
+            P or p : Parallel schedule type
+            O or o : Ordered schedule type
+            A or a : Atomic schedule type
+
+        Application expects the ``type_list`` in comma separated form (i.e. ``--stlist o,a,a,a``)
+
+* ``--nb_flows <n>``
+
+        Set the number of flows to produce.
+
+* ``--nb_pkts <n>``
+
+        Set the number of packets to produce. 0 implies no limit.
+
+* ``--worker_deq_depth <n>``
+
+        Set the dequeue depth of the worker.
+
+* ``--fwd_latency``
+
+        Perform forward latency measurement.
+
+* ``--queue_priority``
+
+        Enable queue priority.
+
-- 
2.13.2



More information about the dev mailing list