[dpdk-dev] [PATCH 00/61] net/qede/base: qede PMD enhancements
Ferruh Yigit
ferruh.yigit at intel.com
Fri Mar 3 11:25:24 CET 2017
On 2/27/2017 7:56 AM, Rasesh Mody wrote:
> Hi,
>
> This patch set adds support for new firmware 8.18.9.0, new features and
> bug fixes.
This looks like depends other qede driver patchset [1], can you please
confirm? If so, it helps to mention from it here.
Also I am getting following build errors [2].
And there are some checkpatch and check-git-log.sh [3] errors.
Thanks,
ferruh
[1]
http://dpdk.org/dev/patchwork/patch/20816/ [patchset with 21 patches]
[2]
.../drivers/net/qede/base/ecore_dev.c:1703:4: error: use of undeclared
identifier 'ECORE_E5_MISSING_CODE'
ECORE_E5_MISSING_CODE;
^
1 error generated.
make[7]: *** [base/ecore_dev.o] Error 1
make[7]: *** Waiting for unfinished jobs....
.../drivers/net/qede/qede_rxtx.c:1202:21: error: variable 'pad' is
uninitialized when used here [-Werror,-Wuninitialized]
rx_mb->data_off = pad + RTE_PKTMBUF_HEADROOM;
^~~
.../drivers/net/qede/qede_rxtx.c:997:14: note: initialize the variable
'pad' to silence this warning
uint16_t pad;
^
= 0
1 error generated.
.../drivers/net/qede/qede_fdir.c: In function ‘qede_config_cmn_fdir_filter’:
.../drivers/net/qede/qede_fdir.c:126:44: error: format ‘%lx’ expects
argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t
{aka long long unsigned int}’ [-Werror=format=]
snprintf(mz_name, sizeof(mz_name) - 1, "%lx", rte_get_timer_cycles());
[3]
Wrong headline format:
send FW version driver state to MFW
net/qede/base: decrease MAX_HWFNS_PER_DEVICE from 4 to 2
net/qede/base: add a printout of the FW, MFW and MBI versions
net/qede/base: set the drv_type before sending load request
Wrong headline prefix:
send FW version driver state to MFW
drivers/net/qede: upgrade the FW to 8.18.9.0
Wrong headline uppercase:
net/qede/base: L2 handler changes
net/qede/base: Add support to set max values of soft resoruces
Wrong headline lowercase:
net/qede/base: use default mtu from shared memory
net/qede/base: update MFW when default mtu is changed
net/qede/base: add non-l2 dcbx tlv application support
net/qede/base: allow PMD to control vport-id and rss-eng-id
Headline too long:
net/qede/base: remove attribute field from update current config
net/qede/base: add support to read personality via MFW commands
net/qede/base: allow only trusted VFs to be promisc/multi-promisc
net/qede/base: add a printout of the FW, MFW and MBI versions
net/qede/base: update bulletin board with link state during init
net/qede/base: Add support to set max values of soft resoruces
net/qede/base: add multi-Txq support on same queue-zone for VFs
net/qede/base: fix race cond between MFW attentions and PF stop
Missing 'Fixes' tag:
net/qede/base: fix to set pointers to NULL after freeing
net/qede/base: fix race cond between MFW attentions and PF stop
>
> Please apply to dpdk-net-next for 17.05 release.
>
> Thanks!
> Rasesh
>
> Harish Patil (3):
> net/qede/base: add support for arfs mode
> net/qede: add ntuple and flow director filter support
> net/qede: add LRO/TSO offloads support
>
> Rasesh Mody (58):
> net/qede/base: return an initialized return value
> send FW version driver state to MFW
> net/qede/base: mask Rx buffer attention bits
> net/qede/base: print various indication on Tx-timeouts
> net/qede/base: utilize FW 8.18.9.0
> drivers/net/qede: upgrade the FW to 8.18.9.0
> net/qede/base: decrease MAX_HWFNS_PER_DEVICE from 4 to 2
> net/qede/base: move mask constants defining NIC type
> net/qede/base: remove attribute field from update current config
> net/qede/base: add nvram options
> net/qede/base: add comment
> net/qede/base: use default mtu from shared memory
> net/qede/base: change queue/sb-id from 8 bit to 16 bit
> net/qede/base: update MFW when default mtu is changed
> net/qede/base: prevent device init failure
> net/qede/base: add support to read personality via MFW commands
> net/qede/base: allow probe to succeed with minor HW-issues
> net/qede/base: remove unneeded step in HW init
> net/qede/base: allow only trusted VFs to be promisc/multi-promisc
> net/qede/base: qm initialization revamp
> net/qede/base: add a printout of the FW, MFW and MBI versions
> net/qede/base: check active VF queues before stopping
> net/qede/base: set the drv_type before sending load request
> net/qede/base: prevent driver laod with invalid resources
> net/qede/base: add interfaces for MFW TLV request processing
> net/qede/base: fix to set pointers to NULL after freeing
> net/qede/base: L2 handler changes
> net/qede/base: add support for handling TLV request from MFW
> net/qede/base: optimize cache-line access
> net/qede/base: infrastructure changes for VF tunnelling
> net/qede/base: revise tunnel APIs/structs
> net/qede/base: add tunnelling support for VFs
> net/qede/base: formatting changes
> net/qede/base: prevent transmitter stuck condition
> net/qede/base: add mask/shift defines for resource command
> net/qede/base: add API for using MFW resource lock
> net/qede/base: remove clock slowdown option
> net/qede/base: add new image types
> net/qede/base: use L2-handles for RSS configuration
> net/qede/base: change valloc to vzalloc
> net/qede/base: add support for previous driver unload
> net/qede/base: add non-l2 dcbx tlv application support
> net/qede/base: update bulletin board with link state during init
> net/qede/base: add coalescing support for VFs
> net/qede/base: add macro got resource value message
> net/qede/base: add mailbox for resource allocation
> net/qede/base: add macro for unsupported command
> net/qede/base: Add support to set max values of soft resoruces
> net/qede/base: add return code check
> net/qede/base: zero out MFW mailbox data
> net/qede/base: move code bits
> net/qede/base: add PF parameter
> net/qede/base: allow PMD to control vport-id and rss-eng-id
> net/qede/base: add udp ports in bulletin board message
> net/qede/base: prevent DMAE transactions during recovery
> net/qede/base: add multi-Txq support on same queue-zone for VFs
> net/qede/base: fix race cond between MFW attentions and PF stop
> net/qede/base: semantic changes
<...>
More information about the dev
mailing list