[dpdk-dev] [PATCH v2] ethdev: moved bypass functions to ixgbe pmd

Lu, Wenzhuo wenzhuo.lu at intel.com
Wed May 31 05:29:49 CEST 2017


Hi Radu,


> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Radu Nicolau
> Sent: Monday, May 29, 2017 11:23 PM
> To: dev at dpdk.org
> Cc: Yigit, Ferruh; Iremonger, Bernard; Nicolau, Radu
> Subject: [dpdk-dev] [PATCH v2] ethdev: moved bypass functions to ixgbe
> pmd
> 
> Moved all bypass functions to ixgbe pmd and removed function pointers
> from the eth_dev_ops struct.
> 
> Changes in v2:
> CONFIG_RTE_NIC_BYPASS removed, new option in the IXGBE section added,
> CONFIG_RTE_LIBRTE_IXGBE_BYPASS.
> Updated test-pmd to always include the bypass commands.
> 
> Signed-off-by: Radu Nicolau <radu.nicolau at intel.com>


> diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.c
> b/drivers/net/ixgbe/rte_pmd_ixgbe.c
> index e8fc9a6..efcaf68 100644
> --- a/drivers/net/ixgbe/rte_pmd_ixgbe.c
> +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c
> @@ -908,3 +908,109 @@ rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
> 
>  	return 0;
>  }
> +
> +#ifdef RTE_LIBRTE_IXGBE_BYPASS
> +int
> +rte_pmd_ixgbe_bypass_init(uint8_t port_id) {
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
Please reference the existing code to check "is_ixgbe_supported" here. Because this API may be called by APP directly.
The same comments for all the other APIs below.

> +
> +	dev = &rte_eth_devices[port_id];
> +	ixgbe_bypass_init(dev);
> +	return 0;
> +}
> +
> +int
> +rte_pmd_ixgbe_bypass_state_show(uint8_t port_id, uint32_t *state) {
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	dev = &rte_eth_devices[port_id];
> +	return ixgbe_bypass_state_show(dev, state); }
> +
> +int
> +rte_pmd_ixgbe_bypass_state_set(uint8_t port_id, uint32_t *new_state) {
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	dev = &rte_eth_devices[port_id];
> +	return ixgbe_bypass_state_store(dev, new_state); }
> +
> +int
> +rte_pmd_ixgbe_bypass_event_show(uint8_t port_id,
> +				uint32_t event,
> +				uint32_t *state)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	dev = &rte_eth_devices[port_id];
> +	return ixgbe_bypass_event_show(dev, event, state); }
> +
> +int
> +rte_pmd_ixgbe_bypass_event_store(uint8_t port_id,
> +				 uint32_t event,
> +				 uint32_t state)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	dev = &rte_eth_devices[port_id];
> +	return ixgbe_bypass_event_store(dev, event, state); }
> +
> +int
> +rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port_id, uint32_t
> +timeout) {
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	dev = &rte_eth_devices[port_id];
> +	return ixgbe_bypass_wd_timeout_store(dev, timeout); }
> +
> +int
> +rte_pmd_ixgbe_bypass_ver_show(uint8_t port_id, uint32_t *ver) {
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	dev = &rte_eth_devices[port_id];
> +	return ixgbe_bypass_ver_show(dev, ver); }
> +
> +int
> +rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port_id, uint32_t
> +*wd_timeout) {
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	dev = &rte_eth_devices[port_id];
> +	return ixgbe_bypass_wd_timeout_show(dev, wd_timeout); }
> +
> +int
> +rte_pmd_ixgbe_bypass_wd_reset(uint8_t port_id) {
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	dev = &rte_eth_devices[port_id];
> +	return ixgbe_bypass_wd_reset(dev);
> +}




More information about the dev mailing list