[dpdk-dev] [PATCH 4/6] net/representor: Implement port representor PMD

Mohammad Abdul Awal mohammad.abdul.awal at intel.com
Wed Nov 1 16:46:25 CET 2017


Representor PMD is a virtual PMD which provides a logical representation
in DPDK for ports of a multi port device. This supports configuration,
management, and monitoring of VFs of a physical function bound to a
userspace control plane application.

Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal at intel.com>
Signed-off-by: Remy Horton <remy.horton at intel.com>
Signed-off-by: Declan Doherty <declan.doherty at intel.com>
---
 drivers/net/Makefile                               |   1 +
 drivers/net/representor/Makefile                   |  52 ++++
 drivers/net/representor/port_representor.c         | 323 +++++++++++++++++++++
 .../representor/rte_pmd_representor_version.map    |   4 +
 mk/rte.app.mk                                      |   1 +
 5 files changed, 381 insertions(+)
 create mode 100644 drivers/net/representor/Makefile
 create mode 100644 drivers/net/representor/port_representor.c
 create mode 100644 drivers/net/representor/rte_pmd_representor_version.map

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index cf33233..3e98cd7 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -71,6 +71,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += tap
 DIRS-$(CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD) += thunderx
 DIRS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio
 DIRS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += vmxnet3
+DIRS-$(CONFIG_RTE_LIBRTE_REPRESENTOR) += representor
 
 ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += kni
diff --git a/drivers/net/representor/Makefile b/drivers/net/representor/Makefile
new file mode 100644
index 0000000..5647045
--- /dev/null
+++ b/drivers/net/representor/Makefile
@@ -0,0 +1,52 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_representor.a
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+LDLIBS += -lrte_representor
+
+EXPORT_MAP := rte_pmd_representor_version.map
+
+LIBABIVER := 1
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_REPRESENTOR) += port_representor.c
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/representor/port_representor.c b/drivers/net/representor/port_representor.c
new file mode 100644
index 0000000..2c934bd
--- /dev/null
+++ b/drivers/net/representor/port_representor.c
@@ -0,0 +1,323 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_vdev.h>
+#include <rte_kvargs.h>
+#include <rte_flow_driver.h>
+
+#include <rte_port_representor_driver.h>
+
+struct port_rep_parameters {
+	uint64_t vport_mask;
+	struct {
+		char bus[RTE_DEV_NAME_MAX_LEN];
+		char device[RTE_DEV_NAME_MAX_LEN];
+	} parent;
+};
+
+static int
+representor_port_create(struct rte_vdev_device *vdev,
+	struct port_rep_parameters *params,
+	const uint16_t vport_id)
+{
+	struct rte_eth_dev *ethdev;
+	struct rte_representor_broker *broker;
+
+	int32_t ret = 0;
+
+
+	if (vdev->device.numa_node == SOCKET_ID_ANY)
+		vdev->device.numa_node = rte_socket_id();
+
+	RTE_LOG(INFO, PMD,
+		"Creating representor port %s ethdev on numa socket %u\n",
+		vdev->device.name, vdev->device.numa_node);
+
+	ethdev = rte_eth_vdev_allocate(vdev,
+		sizeof(struct rte_representor_port));
+	if (!ethdev)
+		return -ENOMEM;
+
+	/*
+	 * Allocate memory for MAC address of port, this should be configured by
+	 * broker
+	 */
+	ethdev->data->mac_addrs = rte_malloc("representor_port_mac",
+			sizeof(struct ether_addr), 0);
+
+	ethdev->data->dev_flags = RTE_ETH_DEV_REPRESENTOR_PORT;
+
+	broker = rte_representor_broker_find(params->parent.bus,
+			params->parent.device);
+	if (!broker)
+		goto create_err;
+
+	ret = rte_representor_port_register(broker,	vport_id, ethdev);
+	if (ret)
+		goto create_err;
+
+	return 0;
+
+create_err:
+	if (broker)
+		rte_representor_port_unregister(ethdev);
+
+	if (ethdev)
+		rte_eth_dev_release_port(ethdev);
+
+	return -ENODEV;
+}
+
+
+static inline void
+apply_range_to_mask(int lower, int upper, uint64_t *mask)
+{
+	int idx_mask;
+
+	for (idx_mask = lower; idx_mask <= upper; idx_mask++)
+		*mask = *mask | (0x01ULL << idx_mask);
+}
+
+static int
+range_to_mask(const char *range_str, uint64_t *mask)
+{
+	int value;
+	int state;
+	int lower_bound;
+
+	state = 0;
+	while (1) {
+		switch (state) {
+		case 0: /* Initial */
+			if (!isdigit(*range_str))
+				return -EINVAL;
+			value = *range_str - '0';
+			state = 1;
+			break;
+
+		case 1: /* Parsing lower bound */
+			if (isdigit(*range_str)) {
+				value *= 10;
+				value += *range_str - '0';
+			} else if (*range_str == '-') {
+				state = '-';
+				lower_bound = value;
+				value = 0;
+			} else if (*range_str == '\0') {
+				apply_range_to_mask(value, value, mask);
+				return 0;
+			} else if (*range_str == ':') {
+				apply_range_to_mask(value, value, mask);
+				value = 0;
+				state = 0;
+			} else {
+				return -EINVAL;
+			}
+			break;
+
+		case '-': /* Parsing upper bound */
+			if (isdigit(*range_str)) {
+				value *= 10;
+				value += *range_str - '0';
+			} else if (*range_str == '\0') {
+				apply_range_to_mask(lower_bound, value, mask);
+				return 0;
+			} else if (*range_str == ':') {
+				apply_range_to_mask(lower_bound, value, mask);
+				value = 0;
+				state = 0;
+			} else {
+				return -EINVAL;
+			}
+			break;
+		}
+		range_str++;
+	}
+
+	return -EINVAL;
+}
+
+
+static int
+port_rep_kvargs_parent(__rte_unused const char *key,
+	const char *value, void *ptr)
+{
+	struct port_rep_parameters *params = ptr;
+	int ret = 0;
+	char *pivot;
+	uint32_t len;
+
+	/* the parent param has to be provided with type_name formatted */
+	pivot = strchr(value, '_');
+	if (pivot) {
+		len = pivot - value;
+		strncpy(params->parent.bus, value, len);
+		strncpy(params->parent.device, pivot + 1, strlen(value) - len);
+	} else {
+		RTE_LOG(ERR, PMD, "'parent=%s' has invalid format\n", value);
+	}
+
+	return ret;
+}
+
+
+static int
+port_rep_kvargs_vport_id(__rte_unused const char *key,
+	const char *value, void *ptr)
+{
+	struct port_rep_parameters *params = ptr;
+	int ret;
+
+	ret = range_to_mask(value, &params->vport_mask);
+	if (ret != 0)
+		RTE_LOG(ERR, PMD, "'vport_id=%s' does not give a valid device "
+			"name\n", value);
+	return ret;
+}
+
+typedef int (*port_rep_arg_func_t)(const char*, const char*, void*);
+
+static const char * const port_rep_kvargs_codes[] = {
+	"parent", "vport_id", NULL
+};
+
+static port_rep_arg_func_t port_rep_kvargs_callbacks[] = {
+	&port_rep_kvargs_parent,
+	&port_rep_kvargs_vport_id,
+	NULL
+};
+
+static int
+port_rep_probe(struct rte_vdev_device *dev)
+{
+	struct rte_kvargs *kvlist = NULL;
+	struct port_rep_parameters params;
+	const char *args;
+	int ret, idx;
+
+	uint16_t vport_id = 0;
+
+	if (!dev)
+		return -EINVAL;
+
+	if (!rte_representor_enabled()) {
+		RTE_LOG(ERR, PMD,
+			"Tried creating representor port pmd without"
+			" --enable-representor\n");
+		return -ENODEV;
+	}
+
+	args = rte_vdev_device_args(dev);
+	RTE_LOG(INFO, PMD, "Initializing representor port pmd for %s\n",
+			rte_vdev_device_name(dev));
+
+	if (args) {
+		kvlist = rte_kvargs_parse(args, port_rep_kvargs_codes);
+		if (!kvlist)
+			return -1;
+
+		idx = 0;
+		while (port_rep_kvargs_codes[idx] != NULL) {
+			ret = rte_kvargs_process(kvlist,
+				port_rep_kvargs_codes[idx],
+				port_rep_kvargs_callbacks[idx],
+				&params);
+			if (ret != 0) {
+				RTE_LOG(ERR, PMD, "port_representor pmd "
+					"parameter error\n");
+				rte_kvargs_free(kvlist);
+				return -1;
+			}
+			idx++;
+		}
+	}
+	RTE_LOG(INFO, PMD, "Configure port_representor pmd with args=\"%s\"\n",
+		args);
+
+	while (params.vport_mask) {
+		if (params.vport_mask & 0x1) {
+			ret = representor_port_create(dev, &params, vport_id);
+			if (ret) {
+				RTE_LOG(ERR, PMD,
+					"representor port create error for "
+					"vport_id (%d)\n", vport_id);
+				break;
+			}
+		}
+		/* Keep bitmask and bit index in sync */
+		params.vport_mask = params.vport_mask << 1;
+		vport_id++;
+	}
+
+	if (kvlist)
+		rte_kvargs_free(kvlist);
+
+	return ret;
+}
+
+static int
+port_rep_remove(struct rte_vdev_device *dev)
+{
+	struct rte_eth_dev *eth_dev = NULL;
+	int32_t ret = 0;
+
+	if (!dev)
+		return -EINVAL;
+
+	RTE_LOG(INFO, PMD, "Closing representor port on numa socket %u\n",
+			rte_socket_id());
+
+	eth_dev = rte_eth_dev_allocated(
+			rte_vdev_device_name(dev));
+	if (!eth_dev)
+		return -EINVAL;
+
+	ret = rte_representor_port_unregister(eth_dev);
+	if (ret)
+		return ret;
+
+	rte_eth_dev_release_port(eth_dev);
+
+	return 0;
+}
+
+static struct rte_vdev_driver port_rep_vdev_drv = {
+	.probe = port_rep_probe,
+	.remove = port_rep_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_representor, port_rep_vdev_drv);
+RTE_PMD_REGISTER_ALIAS(net_representor, eth_representor);
+RTE_PMD_REGISTER_PARAM_STRING(net_representor,
+	"parent=<bus_device>,vport_id=<uint range>");
diff --git a/drivers/net/representor/rte_pmd_representor_version.map b/drivers/net/representor/rte_pmd_representor_version.map
new file mode 100644
index 0000000..ef35398
--- /dev/null
+++ b/drivers/net/representor/rte_pmd_representor_version.map
@@ -0,0 +1,4 @@
+DPDK_2.0 {
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 0778589..460514b 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -146,6 +146,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD)       += -lrte_pmd_mlx5 -libverbs -lmlx5
 _LDLIBS-$(CONFIG_RTE_LIBRTE_MRVL_PMD)       += -lrte_pmd_mrvl -L$(LIBMUSDK_PATH)/lib -lmusdk
 _LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD)        += -lrte_pmd_nfp
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL)       += -lrte_pmd_null
+_LDLIBS-$(CONFIG_RTE_LIBRTE_REPRESENTOR)    += -lrte_pmd_representor
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP)       += -lrte_pmd_pcap -lpcap
 _LDLIBS-$(CONFIG_RTE_LIBRTE_QEDE_PMD)       += -lrte_pmd_qede
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING)       += -lrte_pmd_ring
-- 
2.7.4



More information about the dev mailing list