[dpdk-dev] [PATCH v7 2/2] app/testpmd: add API for configuration of queue region

[Zhao1, Wei]

Hi，Ferruh

> -----Original Message-----
> From: Zhao1, Wei
> Sent: Tuesday, October 10, 2017 10:56 AM
> To: Yigit, Ferruh <ferruh.yigit at intel.com>; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v7 2/2] app/testpmd: add API for
> configuration of queue region
> 
> Hi,
> 
> > -----Original Message-----
> > From: Yigit, Ferruh
> > Sent: Wednesday, October 4, 2017 2:04 AM
> > To: Zhao1, Wei <wei.zhao1 at intel.com>; dev at dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH v7 2/2] app/testpmd: add API for
> > configuration of queue region
> >
> > On 9/29/2017 10:16 AM, Wei Zhao wrote:
> > > This patch add a API configuration of queue region in rss.
> > > It can parse the parameters of region index, queue number, queue
> > > start index, user priority, traffic classes and so on.
> > > According to commands from command line, it will call i40e private
> > > API and start the process of set or flush queue region configure. As
> > > this feature is specific for i40e, so private API will be used. Aslo
> > > add a document for these new commands.
> > > Queue region only support PF by now, so this document is only for
> > > configuration of queue region on PF port.
> > >
> > > Signed-off-by: Wei Zhao <wei.zhao1 at intel.com>
> > > ---
> > >  app/test-pmd/cmdline.c                      | 389
> > ++++++++++++++++++++++++++++
> > >  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  41 +++
> > >  2 files changed, 430 insertions(+)
> > >
> > > diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> > > 4f2d731..da7dc24 100644
> > > --- a/app/test-pmd/cmdline.c
> > > +++ b/app/test-pmd/cmdline.c
> > > @@ -637,6 +637,24 @@ static void cmd_help_long_parsed(void
> > *parsed_result,
> > >  			"ptype mapping update (port_id) (hw_ptype)
> > (sw_ptype)\n"
> > >  			"    Update a ptype mapping item on a port\n\n"
> > >
> > > +			"set port (port_id) queue-region region_id (value) "
> > > +			"queue_start_index (value) queue_num (value)\n"
> > > +			"    Set a queue region on a port\n\n"
> > > +
> > > +			"set port (port_id) queue-region region_id (value) "
> > > +			"flowtype (value)\n"
> > > +			"    Set a flowtype region index on a port\n\n"
> > > +
> > > +			"set port (port_id) queue-region UP (value)
> > region_id (value)\n"
> > > +			"    Set the mapping of User Priority to "
> > > +			"queue region on a port\n\n"
> > > +
> > > +			"flush port (port_id) queue-region (on|off)\n"
> > > +			"    flush all queue region related configuration\n\n"
> > > +
> > > +			"get port (port_id) queue-region\n"
> > > +			"	 get all queue region related configuration
> > info\n\n"
> > > +
> >
> > You did same thing and created "flush" and "get" root level commands
> > this time.
> >
> > For get, existing "show port #P .." can be used:
> > "show port #P queue-region"
> >
> > For flush, what do you think:
> > "set port #P queue-region flush (on|off)" ?
> 
> Ok.
> 
> >
> > >  			, list_pkt_forwarding_modes()
> > >  		);
> > >  	}
> > > @@ -8228,6 +8246,372 @@ cmdline_parse_inst_t cmd_syn_filter = {
> > >  		NULL,
> > >  	},
> > >  };
> > > +/* *** queue region set *** */
> > > +struct cmd_queue_region_result {
> > > +	cmdline_fixed_string_t set;
> > > +	cmdline_fixed_string_t port;
> > > +	uint8_t  port_id;
> > > +	cmdline_fixed_string_t cmd;
> > > +	cmdline_fixed_string_t region;
> > > +	uint8_t  region_id;
> > > +	cmdline_fixed_string_t queue_start_index;
> > > +	uint8_t  queue_id;
> > > +	cmdline_fixed_string_t queue_num;
> > > +	uint8_t  queue_num_value;
> > > +};
> > > +
> > > +static void
> > > +cmd_queue_region_parsed(void *parsed_result,
> > > +			__attribute__((unused)) struct cmdline *cl,
> > > +			__attribute__((unused)) void *data) {
> > > +	struct cmd_queue_region_result *res = parsed_result;
> > > +	int ret = 0;
> >
> > For port_id other than i40e, this call should return "Not supported",
> > not success. There are samples to this usage can you please check them?
> 
> Do you mean to add the check code :
> 
> 	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> 		return;
> 
> maybe all CLI parser function NEED it.

Sorry, maybe it should be this mode.
 
	int ret = -ENOTSUP;

	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
		return ret;


> 
> 
> >
> > > +#ifdef RTE_LIBRTE_I40E_PMD
> > > +	struct rte_i40e_rss_region_conf region_conf;
> > > +
> > > +	memset(&region_conf, 0, sizeof(region_conf));
> > > +	region_conf.op = RTE_PMD_I40E_QUEUE_REGION_SET;
> > > +	region_conf.region_id = res->region_id;
> > > +	region_conf.queue_num = res->queue_num_value;
> > > +	region_conf.queue_start_index = res->queue_id;
> > > +
> > > +	ret = rte_pmd_i40e_rss_queue_region_conf(res->port_id,
> > > +&region_conf); #endif
> > > +
> > > +	if (ret < 0)
> > > +		printf("queue region config programming error: (%s)\n",
> > > +				strerror(-ret));
> > > +}
> >
> > <...>