[dpdk-dev] [PATCH v2 1/2] net/i40e: fix VF initialization error

Jingjing Wu jingjing.wu at intel.com
Tue Oct 10 00:08:30 CEST 2017


In igb_uio, FLR is issued during open device file. i40evf is trying
to initialize admin queue when driver probe, while the FLR is not
done by host driver. That will cause initialization fail.

This patch is adding the checking if VF reset is done before
adimin queue initialization.

Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")

Cc: stable at dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
---
V2 change:
 remove useless code.

 drivers/net/i40e/i40e_ethdev_vf.c | 44 ++++++++++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 14 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 111ac39..64e771c 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -1111,10 +1111,30 @@ i40evf_enable_irq0(struct i40e_hw *hw)
 }
 
 static int
-i40evf_reset_vf(struct i40e_hw *hw)
+i40evf_check_vf_reset_done(struct i40e_hw *hw)
 {
 	int i, reset;
 
+	for (i = 0; i < MAX_RESET_WAIT_CNT; i++) {
+		reset = I40E_READ_REG(hw, I40E_VFGEN_RSTAT) &
+			I40E_VFGEN_RSTAT_VFR_STATE_MASK;
+		reset = reset >> I40E_VFGEN_RSTAT_VFR_STATE_SHIFT;
+		if (reset == VIRTCHNL_VFR_VFACTIVE ||
+		    reset == VIRTCHNL_VFR_COMPLETED)
+			break;
+		rte_delay_ms(50);
+	}
+
+	if (i >= MAX_RESET_WAIT_CNT)
+		return -1;
+
+	return 0;
+}
+static int
+i40evf_reset_vf(struct i40e_hw *hw)
+{
+	int ret;
+
 	if (i40e_vf_reset(hw) != I40E_SUCCESS) {
 		PMD_INIT_LOG(ERR, "Reset VF NIC failed");
 		return -1;
@@ -1130,19 +1150,10 @@ i40evf_reset_vf(struct i40e_hw *hw)
 	  */
 	rte_delay_ms(200);
 
-	for (i = 0; i < MAX_RESET_WAIT_CNT; i++) {
-		reset = rd32(hw, I40E_VFGEN_RSTAT) &
-			I40E_VFGEN_RSTAT_VFR_STATE_MASK;
-		reset = reset >> I40E_VFGEN_RSTAT_VFR_STATE_SHIFT;
-		if (VIRTCHNL_VFR_COMPLETED == reset || VIRTCHNL_VFR_VFACTIVE == reset)
-			break;
-		else
-			rte_delay_ms(50);
-	}
-
-	if (i >= MAX_RESET_WAIT_CNT) {
-		PMD_INIT_LOG(ERR, "Reset VF NIC failed");
-		return -1;
+	ret = i40evf_check_vf_reset_done(hw);
+	if (ret) {
+		PMD_INIT_LOG(ERR, "VF is still resetting");
+		return ret;
 	}
 
 	return 0;
@@ -1165,6 +1176,10 @@ i40evf_init_vf(struct rte_eth_dev *dev)
 		goto err;
 	}
 
+	err = i40evf_check_vf_reset_done(hw);
+	if (err)
+		goto err;
+
 	i40e_init_adminq_parameter(hw);
 	err = i40e_init_adminq(hw);
 	if (err) {
@@ -1189,6 +1204,7 @@ i40evf_init_vf(struct rte_eth_dev *dev)
 		PMD_INIT_LOG(ERR, "init_adminq failed");
 		goto err;
 	}
+
 	vf->aq_resp = rte_zmalloc("vf_aq_resp", I40E_AQ_BUF_SZ, 0);
 	if (!vf->aq_resp) {
 		PMD_INIT_LOG(ERR, "unable to allocate vf_aq_resp memory");
-- 
2.7.4



More information about the dev mailing list