[dpdk-dev] [PATCH v2 0/7] Add Membership Library

Yipeng Wang yipeng1.wang at intel.com
Sat Sep 2 03:24:34 CEST 2017

DPDK Membership Library provides an API that can be used by many DPDK
applications to conduct one or more set-membership tests (we mention some
possible use cases below, but interested readers can refer to
[1] for a wider survey of use cases).

The basic functionalities of the Membership Library include
inserting a new member, deleting an existing member, and querying the existence
of a member. The query result would indicate with high accuracy which specific
set this member belongs to among a group of sets.

The Membership Library is an extension and generalization of traditional filter
data structures [2,3], which maintain a space-efficient “set-summary”.
There are two advantages of using such a set-summary rather than operating on a
“full-blown” complete list of elements: firstly it has a much smaller storage
requirement than storing the whole list of elements, and secondly set membership
tests (or other operations) is much more efficient than searching through the
complete list of elements.

A membership test for an element will return the set this element belongs to if
found (or return "not-found") with high accuracy. If needed, the accuracy of the
membership tests could be further increased with larger storage space.
Set-summary is a fundamental data aggregation component that can be used in many
network applications. It is a crucial structure to address performance and
scalability issues of diverse applications including overlay networks, wild card
flow classification, web-caches, load balancing, connection tracking,
data-centric networks, flow table summaries, network statistics and traffic
monitoring. Our Proof of Concept (PoC) using set-summary to optimize flow lookup
in Open vSwitch (OvS) shows a speedup of about 2-3X.

This patch set implements two types of set-summaries, i.e., hash-table based
set-summary (HTSS) and Vector Bloom Filter (vBF). HTSS supports both the
non-cache and cache modes. The non-cache mode can incur a small chance of
false-positives which is the case when the set-summary indicates a key belongs
to a given set while actually it is not. The cache mode can also have
false-negatives in addition to false-positives. False-negatives means the case
when the set-summary indicates a key does not belong to a given set while
actually it does. This happens because cache mode allows new key to evict
existing keys. vBF only has false-positives similar to the non-cache HTSS.
However, one can set the false-positive rate arbitrarily. HTSS's
false-positive rate is determined by the hash-table size and the signature size.

[1] A Broder and M Mitzenmacher, “Network Applications of Bloom Filters: A
Survey,” in Internet Mathematics, 2005.

[2] B H Bloom, “Space/Time Trade-offs in Hash Coding with Allowable Errors,”
Communications of the ACM, 1970.

[3] B Fan, D G Andersen and M Kaminsky, “Cuckoo Filter: Practically Better Than
Bloom,” in Conference on emerging Networking Experiments and Technologies, 2014.

- test: add bad parameter test functions to test the creation fail case.
- test: add find existing test.
- member lib: Add num_entries check in rte_member_create_ht
- member lib: Add multiple checks for rte_member_create_vbf to avoid divide-by-0
- member lib: remove unnecessary ret from rte_member.c according to Stephen's
- member lib: change the vBF creation function to be not too conservative.
  Previous algorithm is too conservative on false positive.
- member lib: fix uninitilize issue fail gcc-4.8 in rte_member_find_existing.
- member lib: add rte_member_find_existing to version map.
- makefile: lib/librte_member/Makefile: change include order according to
  Luca's comment
- documentation: update the programmer guide for membership library

Yipeng Wang (7):
  member: implement main API
  member: implement HT mode
  member: implement vBF mode
  member: add AVX for HT mode
  member: enable the library
  test/member: add functional and perf tests
  doc: add membership documentation

 MAINTAINERS                              |    7 +
 config/common_base                       |    5 +
 doc/api/doxy-api-index.md                |    3 +-
 doc/api/doxy-api.conf                    |    1 +
 doc/guides/prog_guide/img/member_i1.svg  | 1613 ++++++++++++++++++++++++++++++
 doc/guides/prog_guide/img/member_i2.svg  |   36 +
 doc/guides/prog_guide/img/member_i3.svg  |  148 +++
 doc/guides/prog_guide/img/member_i4.svg  |  450 +++++++++
 doc/guides/prog_guide/img/member_i5.svg  |  163 +++
 doc/guides/prog_guide/img/member_i6.svg  |  332 ++++++
 doc/guides/prog_guide/img/member_i7.svg  |  399 ++++++++
 doc/guides/prog_guide/index.rst          |   14 +
 doc/guides/prog_guide/member_lib.rst     |  440 ++++++++
 doc/guides/rel_notes/release_17_11.rst   |   17 +
 lib/Makefile                             |    2 +
 lib/librte_eal/common/eal_common_log.c   |    1 +
 lib/librte_eal/common/include/rte_log.h  |    1 +
 lib/librte_member/Makefile               |   51 +
 lib/librte_member/rte_member.c           |  342 +++++++
 lib/librte_member/rte_member.h           |  518 ++++++++++
 lib/librte_member/rte_member_ht.c        |  569 +++++++++++
 lib/librte_member/rte_member_ht.h        |  115 +++
 lib/librte_member/rte_member_vbf.c       |  350 +++++++
 lib/librte_member/rte_member_vbf.h       |   85 ++
 lib/librte_member/rte_member_version.map |   16 +
 lib/librte_member/rte_member_x86.h       |  111 ++
 mk/rte.app.mk                            |    2 +
 test/test/Makefile                       |    3 +
 test/test/test_member.c                  |  682 +++++++++++++
 test/test/test_member_perf.c             |  643 ++++++++++++
 30 files changed, 7118 insertions(+), 1 deletion(-)
 create mode 100644 doc/guides/prog_guide/img/member_i1.svg
 create mode 100644 doc/guides/prog_guide/img/member_i2.svg
 create mode 100644 doc/guides/prog_guide/img/member_i3.svg
 create mode 100644 doc/guides/prog_guide/img/member_i4.svg
 create mode 100644 doc/guides/prog_guide/img/member_i5.svg
 create mode 100644 doc/guides/prog_guide/img/member_i6.svg
 create mode 100644 doc/guides/prog_guide/img/member_i7.svg
 create mode 100644 doc/guides/prog_guide/member_lib.rst
 create mode 100644 lib/librte_member/Makefile
 create mode 100644 lib/librte_member/rte_member.c
 create mode 100644 lib/librte_member/rte_member.h
 create mode 100644 lib/librte_member/rte_member_ht.c
 create mode 100644 lib/librte_member/rte_member_ht.h
 create mode 100644 lib/librte_member/rte_member_vbf.c
 create mode 100644 lib/librte_member/rte_member_vbf.h
 create mode 100644 lib/librte_member/rte_member_version.map
 create mode 100644 lib/librte_member/rte_member_x86.h
 create mode 100644 test/test/test_member.c
 create mode 100644 test/test/test_member_perf.c


More information about the dev mailing list