[dpdk-dev] [PATCH v2 3/4] common_base: extend RTE_MAX_ETHPORTS from 32 to 1024

[Yang, Zhiyong]

Hi,  Lei:

> -----Original Message-----
> From: Yao, Lei A
> Sent: Monday, September 4, 2017 3:46 PM
> To: Yang, Zhiyong <zhiyong.yang at intel.com>; dev at dpdk.org
> Cc: thomas at monjalon.net; Yigit, Ferruh <ferruh.yigit at intel.com>; Wiles, Keith
> <keith.wiles at intel.com>; stephen at networkplumber.org; Yang, Zhiyong
> <zhiyong.yang at intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 3/4] common_base: extend
> RTE_MAX_ETHPORTS from 32 to 1024
> 
> 
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Zhiyong Yang
> > Sent: Monday, September 4, 2017 1:58 PM
> > To: dev at dpdk.org
> > Cc: thomas at monjalon.net; Yigit, Ferruh <ferruh.yigit at intel.com>;
> > Wiles, Keith <keith.wiles at intel.com>; stephen at networkplumber.org;
> > Yang, Zhiyong <zhiyong.yang at intel.com>
> > Subject: [dpdk-dev] [PATCH v2 3/4] common_base: extend
> > RTE_MAX_ETHPORTS from 32 to 1024
> >
> > The reasons to modify RTE_MAX_ETHPORTS is the following.
> >
> > 1. RTE_MAX_ETHPORTS=32 by default has not met user's requirements with
> > development of virtualization technology. Some vdev users have to
> > modify the setting before the compiling.
> >
> > 2. port_id have been extended to 16 bits definition. But for many
> > samples such as testpmd, l3fwd, num of port is still limited to
> > RTE_MAX_ETHPORTS=32 by default. This may limit usage of 16 bits
> > port_id.
> >
> > So, it is necessary to enlarge RTE_MAX_ETHPORTS to more than 256.
> >
> > Signed-off-by: Zhiyong Yang <zhiyong.yang at intel.com>
> > ---
> >  config/common_base | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/config/common_base b/config/common_base index
> > 5e97a08b6..dccc13e31 100644
> > --- a/config/common_base
> > +++ b/config/common_base
> > @@ -131,7 +131,7 @@ CONFIG_RTE_LIBRTE_KVARGS=y  #
> > CONFIG_RTE_LIBRTE_ETHER=y  CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
> > -CONFIG_RTE_MAX_ETHPORTS=32
> > +CONFIG_RTE_MAX_ETHPORTS=1024
> >  CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
> >  CONFIG_RTE_LIBRTE_IEEE1588=n
> >  CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
> > --
> > 2.13.3
> Hi, Zhiyong
> 
> I met one issue for changing CONFIG_RTE_MAX_ETHPORTS to 1024.
> One process can only open 1024 file as maximum in common linux distribution,
> after practice, only 1009 socket file can be used for vdev device with testpmd
> sample.

Thanks for your info.  It seems that 1024 is too large and may bring some potential issues.

Thanks
Zhiyong