[dpdk-dev] [PATCH v3 1/4] ethdev: add group counter support to rte_flow
Declan Doherty
declan.doherty at intel.com
Fri Apr 6 14:24:00 CEST 2018
Add new RTE_FLOW_ACTION_TYPE_GROUP_COUNT action type to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain.
Introduce new API rte_flow_query_group_count to allow querying of group
counters.
Signed-off-by: Declan Doherty <declan.doherty at intel.com>
---
doc/guides/prog_guide/rte_flow.rst | 35 +++++++++++++++++++++
lib/librte_ether/rte_ethdev_version.map | 8 +++++
lib/librte_ether/rte_flow.c | 21 +++++++++++++
lib/librte_ether/rte_flow.h | 56 ++++++++++++++++++++++++++++++++-
lib/librte_ether/rte_flow_driver.h | 6 ++++
5 files changed, 125 insertions(+), 1 deletion(-)
diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 961943d..fd33d19 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1698,6 +1698,41 @@ Return values:
- 0 on success, a negative errno value otherwise and ``rte_errno`` is set.
+
+Group Count Query
+~~~~~~~~~~~~~~~~~
+
+Query group counter which can be associated with multiple flows on a specified
+port.
+
+This function allows retrieving of group counters. A group counter is a
+counter which can be shared among multiple flows on a single port or among
+multiple flows on multiple ports within the same switch domain. Data is
+gathered by special actions which must be present in the flow rule
+definition.
+
+.. code-block:: c
+
+ int
+ rte_flow_query_group_count(uint16_t port_id,
+ uint32_t group_counter_id,
+ struct rte_flow_query_count *count,
+ struct rte_flow_error *error);
+
+Arguments:
+
+- ``port_id``: port identifier of Ethernet device.
+- ``group_counter_id``: group counter identifier.
+- ``count``: group counter parameters.
+- ``error``: perform verbose error reporting if not NULL. PMDs initialize
+ this structure in case of error only.
+
+Return values:
+
+- 0 on success, a negative errno value otherwise and ``rte_errno`` is set.
+
+
+
Isolated mode
-------------
diff --git a/lib/librte_ether/rte_ethdev_version.map b/lib/librte_ether/rte_ethdev_version.map
index 34df6c8..cff6807 100644
--- a/lib/librte_ether/rte_ethdev_version.map
+++ b/lib/librte_ether/rte_ethdev_version.map
@@ -229,3 +229,11 @@ EXPERIMENTAL {
rte_mtr_stats_update;
} DPDK_17.11;
+
+
+EXPERIMENTAL {
+ global:
+
+ rte_flow_query_group_count
+
+} DPDK_18.05;
diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ether/rte_flow.c
index 38f2d27..e10b1d0 100644
--- a/lib/librte_ether/rte_flow.c
+++ b/lib/librte_ether/rte_flow.c
@@ -418,3 +418,24 @@ rte_flow_copy(struct rte_flow_desc *desc, size_t len,
}
return 0;
}
+
+int __rte_experimental
+rte_flow_query_group_count(uint16_t port_id,
+ uint32_t group_count_id,
+ struct rte_flow_query_count *count,
+ struct rte_flow_error *error)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
+
+ if (!ops)
+ return -rte_errno;
+ if (likely(!!ops->query_group_count))
+ return flow_err(port_id,
+ ops->query_group_count(dev, group_count_id,
+ count, error),
+ error);
+ return rte_flow_error_set(error, ENOSYS,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, rte_strerror(ENOSYS));
+}
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
index 13e4202..7d1f89d 100644
--- a/lib/librte_ether/rte_flow.h
+++ b/lib/librte_ether/rte_flow.h
@@ -1010,7 +1010,19 @@ enum rte_flow_action_type {
*
* See struct rte_flow_action_security.
*/
- RTE_FLOW_ACTION_TYPE_SECURITY
+ RTE_FLOW_ACTION_TYPE_SECURITY,
+
+ /**
+ * Enable a shared flow group counter for flow. Group counters can be
+ * associated with multiples flows on the same port or on port within
+ * the same switch domain if supported by that device.
+ *
+ * Group counters can be retrieved and reset through
+ * rte_flow_query_group_count()
+ *
+ * See struct rte_flow_action_group_count.
+ */
+ RTE_FLOW_ACTION_TYPE_GROUP_COUNT
};
/**
@@ -1149,6 +1161,18 @@ struct rte_flow_action_security {
};
/**
+ * RTE_FLOW_ACTION_TYPE_GROUP_COUNT
+ *
+ * A packet/byte counter which can be shared across a group of flows programmed
+ * on the same port/switch domain.
+ *
+ * Non-terminating by default.
+ */
+struct rte_flow_action_group_count {
+ uint32_t id;
+};
+
+/**
* Definition of a single action.
*
* A list of actions is terminated by a END action.
@@ -1476,6 +1500,36 @@ rte_flow_copy(struct rte_flow_desc *fd, size_t len,
const struct rte_flow_item *items,
const struct rte_flow_action *actions);
+
+/**
+ * Get hit/bytes count for group counter.
+ *
+ * A group counter is a counter which can be shared among multiple flows on a
+ * single port or among multiple flows on multiple ports within the same
+ * switch domain.
+ *
+ * In the case of ports within the same switch domain a global name space is
+ * assumed for group_count_id value.
+ *
+ * @param[in] port_id
+ * Port identifier of Ethernet device.
+ * @param[in] group_count_id
+ * Group counter identifier to query
+ * @param[out] count
+ * Group counter value
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * Negative error code (errno value) and rte_errno is set.
+ */
+int __rte_experimental
+rte_flow_query_group_count(uint16_t port_id,
+ uint32_t group_count_id,
+ struct rte_flow_query_count *count,
+ struct rte_flow_error *error);
+
#ifdef __cplusplus
}
#endif
diff --git a/lib/librte_ether/rte_flow_driver.h b/lib/librte_ether/rte_flow_driver.h
index 7778c8e..ef09465 100644
--- a/lib/librte_ether/rte_flow_driver.h
+++ b/lib/librte_ether/rte_flow_driver.h
@@ -96,6 +96,12 @@ struct rte_flow_ops {
(struct rte_eth_dev *,
int,
struct rte_flow_error *);
+ /** See rte_flow_query_group_count(). */
+ int (*query_group_count)
+ (struct rte_eth_dev *,
+ uint32_t,
+ struct rte_flow_query_count *,
+ struct rte_flow_error *);
};
/**
--
2.7.4
More information about the dev
mailing list