[dpdk-dev] [PATCH v3 4/5] app/testpmd: introduce new tunnel VXLAN-GPE
Adrien Mazarguil
adrien.mazarguil at 6wind.com
Thu Apr 12 14:01:36 CEST 2018
On Thu, Apr 12, 2018 at 03:33:23PM +0800, Xueming Li wrote:
> Add VXLAN-GPE support to csum forwarding engine and rte flow.
>
> Signed-off-by: Xueming Li <xuemingl at mellanox.com>
This commit still misses testpmd documentation for the new flow command
parameters ("Pattern items" section in
doc/guides/testpmd_app_ug/testpmd_funcs.rst).
Once addressed, as far as rte_flow is concerned (I did not review the csum
engine nor other configuration changes):
Acked-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
> ---
> app/test-pmd/cmdline_flow.c | 24 ++++++++++
> app/test-pmd/config.c | 2 +
> app/test-pmd/csumonly.c | 83 +++++++++++++++++++++++++++++++++--
> app/test-pmd/parameters.c | 12 ++++-
> app/test-pmd/testpmd.h | 2 +
> doc/guides/testpmd_app_ug/run_app.rst | 5 +++
> 6 files changed, 124 insertions(+), 4 deletions(-)
>
> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
> index f85c1c57f..0d3c62599 100644
> --- a/app/test-pmd/cmdline_flow.c
> +++ b/app/test-pmd/cmdline_flow.c
> @@ -154,6 +154,8 @@ enum index {
> ITEM_GENEVE,
> ITEM_GENEVE_VNI,
> ITEM_GENEVE_PROTO,
> + ITEM_VXLAN_GPE,
> + ITEM_VXLAN_GPE_VNI,
>
> /* Validate/create actions. */
> ACTIONS,
> @@ -470,6 +472,7 @@ static const enum index next_item[] = {
> ITEM_GTPC,
> ITEM_GTPU,
> ITEM_GENEVE,
> + ITEM_VXLAN_GPE,
> ZERO,
> };
>
> @@ -626,6 +629,12 @@ static const enum index item_geneve[] = {
> ZERO,
> };
>
> +static const enum index item_vxlan_gpe[] = {
> + ITEM_VXLAN_GPE_VNI,
> + ITEM_NEXT,
> + ZERO,
> +};
> +
> static const enum index next_action[] = {
> ACTION_END,
> ACTION_VOID,
> @@ -1560,6 +1569,21 @@ static const struct token token_list[] = {
> .args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_geneve,
> protocol)),
> },
> + [ITEM_VXLAN_GPE] = {
> + .name = "vxlan-gpe",
> + .help = "match VXLAN-GPE header",
> + .priv = PRIV_ITEM(VXLAN_GPE,
> + sizeof(struct rte_flow_item_vxlan_gpe)),
> + .next = NEXT(item_vxlan_gpe),
> + .call = parse_vc,
> + },
> + [ITEM_VXLAN_GPE_VNI] = {
> + .name = "vni",
> + .help = "VXLAN-GPE identifier",
> + .next = NEXT(item_vxlan_gpe, NEXT_ENTRY(UNSIGNED), item_param),
> + .args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_vxlan_gpe,
> + vni)),
> + },
>
> /* Validate/create actions. */
> [ACTIONS] = {
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 4a273eff7..349eb9015 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -981,6 +981,7 @@ static const struct {
> MK_FLOW_ITEM(GTPC, sizeof(struct rte_flow_item_gtp)),
> MK_FLOW_ITEM(GTPU, sizeof(struct rte_flow_item_gtp)),
> MK_FLOW_ITEM(GENEVE, sizeof(struct rte_flow_item_geneve)),
> + MK_FLOW_ITEM(VXLAN_GPE, sizeof(struct rte_flow_item_vxlan_gpe)),
> };
>
> /** Pattern item specification types. */
> @@ -3082,6 +3083,7 @@ flowtype_to_str(uint16_t flow_type)
> {"vxlan", RTE_ETH_FLOW_VXLAN},
> {"geneve", RTE_ETH_FLOW_GENEVE},
> {"nvgre", RTE_ETH_FLOW_NVGRE},
> + {"vxlan-gpe", RTE_ETH_FLOW_VXLAN_GPE},
> };
>
> for (i = 0; i < RTE_DIM(flowtype_str_table); i++) {
> diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
> index 5f5ab64aa..d98c51648 100644
> --- a/app/test-pmd/csumonly.c
> +++ b/app/test-pmd/csumonly.c
> @@ -60,6 +60,8 @@
> #define _htons(x) (x)
> #endif
>
> +uint16_t vxlan_gpe_udp_port = 4790;
> +
> /* structure that caches offload info for the current packet */
> struct testpmd_offload_info {
> uint16_t ethertype;
> @@ -194,6 +196,70 @@ parse_vxlan(struct udp_hdr *udp_hdr,
> info->l2_len += ETHER_VXLAN_HLEN; /* add udp + vxlan */
> }
>
> +/* Parse a vxlan-gpe header */
> +static void
> +parse_vxlan_gpe(struct udp_hdr *udp_hdr,
> + struct testpmd_offload_info *info)
> +{
> + struct ether_hdr *eth_hdr;
> + struct ipv4_hdr *ipv4_hdr;
> + struct ipv6_hdr *ipv6_hdr;
> + struct vxlan_gpe_hdr *vxlan_gpe_hdr;
> + uint8_t vxlan_gpe_len = sizeof(*vxlan_gpe_hdr);
> +
> + /* Check udp destination port. */
> + if (udp_hdr->dst_port != _htons(vxlan_gpe_udp_port))
> + return;
> +
> + vxlan_gpe_hdr = (struct vxlan_gpe_hdr *)((char *)udp_hdr +
> + sizeof(struct udp_hdr));
> +
> + if (!vxlan_gpe_hdr->proto || vxlan_gpe_hdr->proto ==
> + VXLAN_GPE_TYPE_IPv4) {
> + info->is_tunnel = 1;
> + info->outer_ethertype = info->ethertype;
> + info->outer_l2_len = info->l2_len;
> + info->outer_l3_len = info->l3_len;
> + info->outer_l4_proto = info->l4_proto;
> +
> + ipv4_hdr = (struct ipv4_hdr *)((char *)vxlan_gpe_hdr +
> + vxlan_gpe_len);
> +
> + parse_ipv4(ipv4_hdr, info);
> + info->ethertype = _htons(ETHER_TYPE_IPv4);
> + info->l2_len = 0;
> +
> + } else if (vxlan_gpe_hdr->proto == VXLAN_GPE_TYPE_IPv6) {
> + info->is_tunnel = 1;
> + info->outer_ethertype = info->ethertype;
> + info->outer_l2_len = info->l2_len;
> + info->outer_l3_len = info->l3_len;
> + info->outer_l4_proto = info->l4_proto;
> +
> + ipv6_hdr = (struct ipv6_hdr *)((char *)vxlan_gpe_hdr +
> + vxlan_gpe_len);
> +
> + info->ethertype = _htons(ETHER_TYPE_IPv6);
> + parse_ipv6(ipv6_hdr, info);
> + info->l2_len = 0;
> +
> + } else if (vxlan_gpe_hdr->proto == VXLAN_GPE_TYPE_ETH) {
> + info->is_tunnel = 1;
> + info->outer_ethertype = info->ethertype;
> + info->outer_l2_len = info->l2_len;
> + info->outer_l3_len = info->l3_len;
> + info->outer_l4_proto = info->l4_proto;
> +
> + eth_hdr = (struct ether_hdr *)((char *)vxlan_gpe_hdr +
> + vxlan_gpe_len);
> +
> + parse_ethernet(eth_hdr, info);
> + } else
> + return;
> +
> + info->l2_len += ETHER_VXLAN_GPE_HLEN;
> +}
> +
> /* Parse a gre header */
> static void
> parse_gre(struct simple_gre_hdr *gre_hdr, struct testpmd_offload_info *info)
> @@ -588,6 +654,10 @@ pkt_copy_split(const struct rte_mbuf *pkt)
> * Ether / (vlan) / IP|IP6 / UDP|TCP|SCTP .
> * Ether / (vlan) / outer IP|IP6 / outer UDP / VxLAN / Ether / IP|IP6 /
> * UDP|TCP|SCTP
> + * Ether / (vlan) / outer IP|IP6 / outer UDP / VXLAN-GPE / Ether / IP|IP6 /
> + * UDP|TCP|SCTP
> + * Ether / (vlan) / outer IP|IP6 / outer UDP / VXLAN-GPE / IP|IP6 /
> + * UDP|TCP|SCTP
> * Ether / (vlan) / outer IP|IP6 / GRE / Ether / IP|IP6 / UDP|TCP|SCTP
> * Ether / (vlan) / outer IP|IP6 / GRE / IP|IP6 / UDP|TCP|SCTP
> * Ether / (vlan) / outer IP|IP6 / IP|IP6 / UDP|TCP|SCTP
> @@ -691,9 +761,16 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
>
> udp_hdr = (struct udp_hdr *)((char *)l3_hdr +
> info.l3_len);
> - parse_vxlan(udp_hdr, &info, m->packet_type);
> - if (info.is_tunnel)
> - tx_ol_flags |= PKT_TX_TUNNEL_VXLAN;
> + parse_vxlan_gpe(udp_hdr, &info);
> + if (info.is_tunnel) {
> + tx_ol_flags |= PKT_TX_TUNNEL_VXLAN_GPE;
> + } else {
> + parse_vxlan(udp_hdr, &info,
> + m->packet_type);
> + if (info.is_tunnel)
> + tx_ol_flags |=
> + PKT_TX_TUNNEL_VXLAN;
> + }
> } else if (info.l4_proto == IPPROTO_GRE) {
> struct simple_gre_hdr *gre_hdr;
>
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> index 2192bdcdf..68063b7a4 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -70,7 +70,7 @@ usage(char* progname)
> "--rss-ip | --rss-udp | "
> "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
> "--txpt= | --txht= | --txwt= | --txfreet= | "
> - "--txrst= | --tx-offloads ]\n",
> + "--txrst= | --tx-offloads= | --vxlan-gpe-port= ]\n",
> progname);
> #ifdef RTE_LIBRTE_CMDLINE
> printf(" --interactive: run in interactive mode.\n");
> @@ -186,6 +186,7 @@ usage(char* progname)
> printf(" --flow-isolate-all: "
> "requests flow API isolated mode on all ports at initialization time.\n");
> printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
> + printf(" --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
> }
>
> #ifdef RTE_LIBRTE_CMDLINE
> @@ -621,6 +622,7 @@ launch_args_parse(int argc, char** argv)
> { "print-event", 1, 0, 0 },
> { "mask-event", 1, 0, 0 },
> { "tx-offloads", 1, 0, 0 },
> + { "vxlan-gpe-port", 1, 0, 0 },
> { 0, 0, 0, 0 },
> };
>
> @@ -1091,6 +1093,14 @@ launch_args_parse(int argc, char** argv)
> rte_exit(EXIT_FAILURE,
> "tx-offloads must be >= 0\n");
> }
> + if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
> + n = atoi(optarg);
> + if (n >= 0)
> + vxlan_gpe_udp_port = (uint16_t)n;
> + else
> + rte_exit(EXIT_FAILURE,
> + "vxlan-gpe-port must be >= 0\n");
> + }
> if (!strcmp(lgopts[opt_idx].name, "print-event"))
> if (parse_event_printing_config(optarg, 1)) {
> rte_exit(EXIT_FAILURE,
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 593ae2160..b270602d9 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -446,6 +446,8 @@ extern uint32_t retry_enabled;
> extern struct fwd_lcore **fwd_lcores;
> extern struct fwd_stream **fwd_streams;
>
> +extern uint16_t vxlan_gpe_udp_port; /**< UDP port of tunnel VXLAN-GPE. */
> +
> extern portid_t nb_peer_eth_addrs; /**< Number of peer ethernet addresses. */
> extern struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
>
> diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
> index 1fd53958a..2e8690f41 100644
> --- a/doc/guides/testpmd_app_ug/run_app.rst
> +++ b/doc/guides/testpmd_app_ug/run_app.rst
> @@ -479,3 +479,8 @@ The commandline options are:
>
> Set the hexadecimal bitmask of TX queue offloads.
> The default value is 0.
> +
> +* ``--vxlan-gpe-port=N``
> +
> + Set the UDP port number of tunnel VXLAN-GPE to N.
> + The default value is 4790.
> --
> 2.13.3
>
--
Adrien Mazarguil
6WIND
More information about the dev
mailing list