[dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support to rte_flow

Ori Kam orika at mellanox.com
Thu Apr 26 16:43:24 CEST 2018


Hi,

PSB

Ori 
> -----Original Message-----
> From: Ferruh Yigit [mailto:ferruh.yigit at intel.com]
> Sent: Thursday, April 26, 2018 5:28 PM
> To: Ori Kam <orika at mellanox.com>; Declan Doherty
> <declan.doherty at intel.com>; dev at dpdk.org; Matan Azrad
> <matan at mellanox.com>
> Subject: Re: [dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support
> to rte_flow
> 
> On 4/26/2018 3:06 PM, Ori Kam wrote:
> > Hi Declan,
> >
> > You are changing API (port_flow_query) which is in use in both MLX5
> > and MLX4 this results in breaking the build.
> 
> Hi Ori,
> 
> Do you mean "rte_flow_query"? port_flow_query() is a function in testpmd,
> how mlx is using it?
>

My bad let me be clearer.
MLX5 and MLX4 are implementing the rte_flow_ops query function.
This patch changes the prototype for the query function which results in 
compilation error and should also result in some change in the MLX5 and MLX4 implementation.
 
 
> >
> > Best,
> > Ori
> >
> >> -----Original Message-----
> >> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Declan Doherty
> >> Sent: Thursday, April 26, 2018 3:08 PM
> >> To: dev at dpdk.org
> >> Cc: Ferruh Yigit <ferruh.yigit at intel.com>; Declan Doherty
> >> <declan.doherty at intel.com>
> >> Subject: [dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support
> >> to rte_flow
> >>
> >> Add rte_flow_action_count action data structure to enable shared
> >> counters across multiple flows on a single port or across multiple
> >> flows on multiple ports within the same switch domain. Also this
> >> enables multiple count actions to be specified in a single flow action.
> >>
> >> This patch also modifies the existing rte_flow_query API to take the
> >> rte_flow_action structure as an input parameter instead of the
> >> rte_flow_action_type enumeration to allow querying a specific action
> >> from a flow rule when multiple actions of the same type are specified.
> >>
> >> This patch also contains updates for the bonding and failsafe PMDs
> >> and testpmd application which are affected by this API change.
> >>
> >> Signed-off-by: Declan Doherty <declan.doherty at intel.com>
> >> ---
> >>  app/test-pmd/cmdline_flow.c             |  6 ++--
> >>  app/test-pmd/config.c                   | 15 +++++----
> >>  app/test-pmd/testpmd.h                  |  2 +-
> >>  doc/guides/prog_guide/rte_flow.rst      | 59 +++++++++++++++++++++--
> ----
> >> ------
> >>  drivers/net/bonding/rte_eth_bond_flow.c |  9 ++---
> >>  drivers/net/failsafe/failsafe_flow.c    |  4 +--
> >>  lib/librte_ether/rte_flow.c             |  2 +-
> >>  lib/librte_ether/rte_flow.h             | 38 +++++++++++++++++++--
> >>  lib/librte_ether/rte_flow_driver.h      |  2 +-
> >>  9 files changed, 93 insertions(+), 44 deletions(-)
> >>
> >> diff --git a/app/test-pmd/cmdline_flow.c
> >> b/app/test-pmd/cmdline_flow.c index 1ac04a0ab..5754e7858 100644
> >> --- a/app/test-pmd/cmdline_flow.c
> >> +++ b/app/test-pmd/cmdline_flow.c
> >> @@ -420,7 +420,7 @@ struct buffer {
> >>  		} destroy; /**< Destroy arguments. */
> >>  		struct {
> >>  			uint32_t rule;
> >> -			enum rte_flow_action_type action;
> >> +			struct rte_flow_action action;
> >>  		} query; /**< Query arguments. */
> >>  		struct {
> >>  			uint32_t *group;
> >> @@ -1101,7 +1101,7 @@ static const struct token token_list[] = {
> >>  		.next = NEXT(NEXT_ENTRY(QUERY_ACTION),
> >>  			     NEXT_ENTRY(RULE_ID),
> >>  			     NEXT_ENTRY(PORT_ID)),
> >> -		.args = ARGS(ARGS_ENTRY(struct buffer, args.query.action),
> >> +		.args = ARGS(ARGS_ENTRY(struct buffer,
> >> args.query.action.type),
> >>  			     ARGS_ENTRY(struct buffer, args.query.rule),
> >>  			     ARGS_ENTRY(struct buffer, port)),
> >>  		.call = parse_query,
> >> @@ -3842,7 +3842,7 @@ cmd_flow_parsed(const struct buffer *in)
> >>  		break;
> >>  	case QUERY:
> >>  		port_flow_query(in->port, in->args.query.rule,
> >> -				in->args.query.action);
> >> +				&in->args.query.action);
> >>  		break;
> >>  	case LIST:
> >>  		port_flow_list(in->port, in->args.list.group_n, diff --git
> >> a/app/test-pmd/config.c b/app/test-pmd/config.c index
> >> 0f2425229..cd6102dfc 100644
> >> --- a/app/test-pmd/config.c
> >> +++ b/app/test-pmd/config.c
> >> @@ -1452,7 +1452,7 @@ port_flow_flush(portid_t port_id)
> >>  /** Query a flow rule. */
> >>  int
> >>  port_flow_query(portid_t port_id, uint32_t rule,
> >> -		enum rte_flow_action_type action)
> >> +		const struct rte_flow_action *action)
> >>  {
> >>  	struct rte_flow_error error;
> >>  	struct rte_port *port;
> >> @@ -1474,15 +1474,16 @@ port_flow_query(portid_t port_id, uint32_t
> rule,
> >>  		return -ENOENT;
> >>  	}
> >>  	if ((unsigned int)action >= RTE_DIM(flow_action) ||
> >> -	    !flow_action[action].name)
> >> +	    !flow_action[action->type].name)
> >>  		name = "unknown";
> >>  	else
> >> -		name = flow_action[action].name;
> >> -	switch (action) {
> >> +		name = flow_action[action->type].name;
> >> +	switch (action->type) {
> >>  	case RTE_FLOW_ACTION_TYPE_COUNT:
> >>  		break;
> >>  	default:
> >> -		printf("Cannot query action type %d (%s)\n", action, name);
> >> +		printf("Cannot query action type %d (%s)\n",
> >> +			action->type, name);
> >>  		return -ENOTSUP;
> >>  	}
> >>  	/* Poisoning to make sure PMDs update it in case of error. */ @@
> >> -1490,7 +1491,7 @@ port_flow_query(portid_t port_id, uint32_t rule,
> >>  	memset(&query, 0, sizeof(query));
> >>  	if (rte_flow_query(port_id, pf->flow, action, &query, &error))
> >>  		return port_flow_complain(&error);
> >> -	switch (action) {
> >> +	switch (action->type) {
> >>  	case RTE_FLOW_ACTION_TYPE_COUNT:
> >>  		printf("%s:\n"
> >>  		       " hits_set: %u\n"
> >> @@ -1505,7 +1506,7 @@ port_flow_query(portid_t port_id, uint32_t
> rule,
> >>  		break;
> >>  	default:
> >>  		printf("Cannot display result for action type %d (%s)\n",
> >> -		       action, name);
> >> +		       action->type, name);
> >>  		break;
> >>  	}
> >>  	return 0;
> >> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index
> >> a33b525e2..1af87b8f4 100644
> >> --- a/app/test-pmd/testpmd.h
> >> +++ b/app/test-pmd/testpmd.h
> >> @@ -620,7 +620,7 @@ int port_flow_create(portid_t port_id,  int
> >> port_flow_destroy(portid_t port_id, uint32_t n, const uint32_t
> >> *rule);  int port_flow_flush(portid_t port_id);  int
> >> port_flow_query(portid_t port_id, uint32_t rule,
> >> -		    enum rte_flow_action_type action);
> >> +		    const struct rte_flow_action *action);
> >>  void port_flow_list(portid_t port_id, uint32_t n, const uint32_t
> >> *group);  int port_flow_isolate(portid_t port_id, int set);
> >>
> >> diff --git a/doc/guides/prog_guide/rte_flow.rst
> >> b/doc/guides/prog_guide/rte_flow.rst
> >> index 301f8762e..88bfc87eb 100644
> >> --- a/doc/guides/prog_guide/rte_flow.rst
> >> +++ b/doc/guides/prog_guide/rte_flow.rst
> >> @@ -1277,17 +1277,19 @@ Actions are performed in list order:
> >>
> >>  .. table:: Mark, count then redirect
> >>
> >> -   +-------+--------+-----------+-------+
> >> -   | Index | Action | Field     | Value |
> >> -   +=======+========+===========+=======+
> >> -   | 0     | MARK   | ``mark``  | 0x2a  |
> >> -   +-------+--------+-----------+-------+
> >> -   | 1     | COUNT                      |
> >> -   +-------+--------+-----------+-------+
> >> -   | 2     | QUEUE  | ``queue`` | 10    |
> >> -   +-------+--------+-----------+-------+
> >> -   | 3     | END                        |
> >> -   +-------+----------------------------+
> >> +   +-------+--------+------------+-------+
> >> +   | Index | Action | Field      | Value |
> >> +   +=======+========+============+=======+
> >> +   | 0     | MARK   | ``mark``   | 0x2a  |
> >> +   +-------+--------+------------+-------+
> >> +   | 1     | COUNT  | ``shared`` | 0     |
> >> +   |       |        +------------+-------+
> >> +   |       |        | ``id``     | 0     |
> >> +   +-------+--------+------------+-------+
> >> +   | 2     | QUEUE  | ``queue``  | 10    |
> >> +   +-------+--------+------------+-------+
> >> +   | 3     | END                         |
> >> +   +-------+-----------------------------+
> >>
> >>  |
> >>
> >> @@ -1516,23 +1518,36 @@ Drop packets.
> >>  Action: ``COUNT``
> >>  ^^^^^^^^^^^^^^^^^
> >>
> >> -Enables counters for this rule.
> >> +Adds a counter action to a matched flow.
> >> +
> >> +If more than one count action is specified in a single flow rule,
> >> +then each action must specify a unique id.
> >>
> >> -These counters can be retrieved and reset through
> >> ``rte_flow_query()``, see
> >> +Counters can be retrieved and reset through ``rte_flow_query()``,
> >> +see
> >>  ``struct rte_flow_query_count``.
> >>
> >> -- Counters can be retrieved with ``rte_flow_query()``.
> >> -- No configurable properties.
> >> +The shared flag indicates whether the counter is unique to the flow
> >> +rule the action is specified with, or whether it is a shared counter.
> >> +
> >> +For a count action with the shared flag set, then then a global
> >> +device namespace is assumed for the counter id, so that any matched
> >> +flow rules
> >> using
> >> +a count action with the same counter id on the same port will
> >> +contribute to that counter.
> >> +
> >> +For ports within the same switch domain then the counter id
> >> +namespace
> >> extends
> >> +to all ports within that switch domain.
> >>
> >>  .. _table_rte_flow_action_count:
> >>
> >>  .. table:: COUNT
> >>
> >> -   +---------------+
> >> -   | Field         |
> >> -   +===============+
> >> -   | no properties |
> >> -   +---------------+
> >> +   +------------+---------------------+
> >> +   | Field      | Value               |
> >> +   +============+=====================+
> >> +   | ``shared`` | shared counter flag |
> >> +   +------------+---------------------+
> >> +   | ``id``     | counter id          |
> >> +   +------------+---------------------+
> >>
> >>  Query structure to retrieve and reset flow rule counters:
> >>
> >> @@ -2282,7 +2297,7 @@ definition.
> >>     int
> >>     rte_flow_query(uint16_t port_id,
> >>                    struct rte_flow *flow,
> >> -                  enum rte_flow_action_type action,
> >> +                  const struct rte_flow_action *action,
> >>                    void *data,
> >>                    struct rte_flow_error *error);
> >>
> >> @@ -2290,7 +2305,7 @@ Arguments:
> >>
> >>  - ``port_id``: port identifier of Ethernet device.
> >>  - ``flow``: flow rule handle to query.
> >> -- ``action``: action type to query.
> >> +- ``action``: action to query, this must match prototype from flow rule.
> >>  - ``data``: pointer to storage for the associated query data type.
> >>  - ``error``: perform verbose error reporting if not NULL. PMDs initialize
> >>    this structure in case of error only.
> >> diff --git a/drivers/net/bonding/rte_eth_bond_flow.c
> >> b/drivers/net/bonding/rte_eth_bond_flow.c
> >> index 8093c04f5..31e4bcaeb 100644
> >> --- a/drivers/net/bonding/rte_eth_bond_flow.c
> >> +++ b/drivers/net/bonding/rte_eth_bond_flow.c
> >> @@ -152,6 +152,7 @@ bond_flow_flush(struct rte_eth_dev *dev, struct
> >> rte_flow_error *err)
> >>
> >>  static int
> >>  bond_flow_query_count(struct rte_eth_dev *dev, struct rte_flow
> >> *flow,
> >> +		      const struct rte_flow_action *action,
> >>  		      struct rte_flow_query_count *count,
> >>  		      struct rte_flow_error *err)
> >>  {
> >> @@ -165,7 +166,7 @@ bond_flow_query_count(struct rte_eth_dev
> *dev,
> >> struct rte_flow *flow,
> >>  	rte_memcpy(&slave_count, count, sizeof(slave_count));
> >>  	for (i = 0; i < internals->slave_count; i++) {
> >>  		ret = rte_flow_query(internals->slaves[i].port_id,
> >> -				     flow->flows[i],
> >> RTE_FLOW_ACTION_TYPE_COUNT,
> >> +				     flow->flows[i], action,
> >>  				     &slave_count, err);
> >>  		if (unlikely(ret != 0)) {
> >>  			RTE_BOND_LOG(ERR, "Failed to query flow on"
> >> @@ -182,12 +183,12 @@ bond_flow_query_count(struct rte_eth_dev
> *dev,
> >> struct rte_flow *flow,
> >>
> >>  static int
> >>  bond_flow_query(struct rte_eth_dev *dev, struct rte_flow *flow,
> >> -		enum rte_flow_action_type type, void *arg,
> >> +		const struct rte_flow_action *action, void *arg,
> >>  		struct rte_flow_error *err)
> >>  {
> >> -	switch (type) {
> >> +	switch (action->type) {
> >>  	case RTE_FLOW_ACTION_TYPE_COUNT:
> >> -		return bond_flow_query_count(dev, flow, arg, err);
> >> +		return bond_flow_query_count(dev, flow, action, arg, err);
> >>  	default:
> >>  		return rte_flow_error_set(err, ENOTSUP,
> >>  					  RTE_FLOW_ERROR_TYPE_ACTION,
> >> arg,
> >> diff --git a/drivers/net/failsafe/failsafe_flow.c
> >> b/drivers/net/failsafe/failsafe_flow.c
> >> index a97f4075d..bfe42fcee 100644
> >> --- a/drivers/net/failsafe/failsafe_flow.c
> >> +++ b/drivers/net/failsafe/failsafe_flow.c
> >> @@ -174,7 +174,7 @@ fs_flow_flush(struct rte_eth_dev *dev,  static
> >> int  fs_flow_query(struct rte_eth_dev *dev,
> >>  	      struct rte_flow *flow,
> >> -	      enum rte_flow_action_type type,
> >> +	      const struct rte_flow_action *action,
> >>  	      void *arg,
> >>  	      struct rte_flow_error *error)  { @@ -185,7 +185,7 @@
> >> fs_flow_query(struct rte_eth_dev *dev,
> >>  	if (sdev != NULL) {
> >>  		int ret = rte_flow_query(PORT_ID(sdev),
> >>  					 flow->flows[SUB_ID(sdev)],
> >> -					 type, arg, error);
> >> +					 action, arg, error);
> >>
> >>  		if ((ret = fs_err(sdev, ret))) {
> >>  			fs_unlock(dev, 0);
> >> diff --git a/lib/librte_ether/rte_flow.c
> >> b/lib/librte_ether/rte_flow.c index 4f94ac9b5..7947529da 100644
> >> --- a/lib/librte_ether/rte_flow.c
> >> +++ b/lib/librte_ether/rte_flow.c
> >> @@ -233,7 +233,7 @@ rte_flow_flush(uint16_t port_id,  int
> >> rte_flow_query(uint16_t port_id,
> >>  	       struct rte_flow *flow,
> >> -	       enum rte_flow_action_type action,
> >> +	       const struct rte_flow_action *action,
> >>  	       void *data,
> >>  	       struct rte_flow_error *error)  { diff --git
> >> a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h index
> >> d390bbf5a..f8ba71cdb 100644
> >> --- a/lib/librte_ether/rte_flow.h
> >> +++ b/lib/librte_ether/rte_flow.h
> >> @@ -1314,7 +1314,7 @@ enum rte_flow_action_type {
> >>  	 * These counters can be retrieved and reset through
> >> rte_flow_query(),
> >>  	 * see struct rte_flow_query_count.
> >>  	 *
> >> -	 * No associated configuration structure.
> >> +	 * See struct rte_flow_action_count.
> >>  	 */
> >>  	RTE_FLOW_ACTION_TYPE_COUNT,
> >>
> >> @@ -1546,6 +1546,38 @@ struct rte_flow_action_queue {
> >>  	uint16_t index; /**< Queue index to use. */  };
> >>
> >> +
> >> +/**
> >> + * @warning
> >> + * @b EXPERIMENTAL: this structure may change without prior notice
> >> + *
> >> + * RTE_FLOW_ACTION_TYPE_COUNT
> >> + *
> >> + * Adds a counter action to a matched flow.
> >> + *
> >> + * If more than one count action is specified in a single flow rule,
> >> +then each
> >> + * action must specify a unique id.
> >> + *
> >> + * Counters can be retrieved and reset through ``rte_flow_query()``,
> >> +see
> >> + * ``struct rte_flow_query_count``.
> >> + *
> >> + * The shared flag indicates whether the counter is unique to the
> >> +flow rule
> >> the
> >> + * action is specified with, or whether it is a shared counter.
> >> + *
> >> + * For a count action with the shared flag set, then then a global
> >> + device
> >> + * namespace is assumed for the counter id, so that any matched flow
> >> + rules
> >> using
> >> + * a count action with the same counter id on the same port will
> >> + contribute
> >> to
> >> + * that counter.
> >> + *
> >> + * For ports within the same switch domain then the counter id
> >> + namespace
> >> extends
> >> + * to all ports within that switch domain.
> >> + */
> >> +struct rte_flow_action_count {
> >> +	uint32_t shared:1; /**< Share counter ID with other flow rules. */
> >> +	uint32_t reserved:31; /**< Reserved, must be zero. */
> >> +	uint32_t id; /**< Counter ID. */
> >> +};
> >> +
> >>  /**
> >>   * RTE_FLOW_ACTION_TYPE_COUNT (query)
> >>   *
> >> @@ -2044,7 +2076,7 @@ rte_flow_flush(uint16_t port_id,
> >>   * @param flow
> >>   *   Flow rule handle to query.
> >>   * @param action
> >> - *   Action type to query.
> >> + *   Action definition as defined in original flow rule.
> >>   * @param[in, out] data
> >>   *   Pointer to storage for the associated query data type.
> >>   * @param[out] error
> >> @@ -2057,7 +2089,7 @@ rte_flow_flush(uint16_t port_id,  int
> >> rte_flow_query(uint16_t port_id,
> >>  	       struct rte_flow *flow,
> >> -	       enum rte_flow_action_type action,
> >> +	       const struct rte_flow_action *action,
> >>  	       void *data,
> >>  	       struct rte_flow_error *error);
> >>
> >> diff --git a/lib/librte_ether/rte_flow_driver.h
> >> b/lib/librte_ether/rte_flow_driver.h
> >> index 3800310ba..1c90c600d 100644
> >> --- a/lib/librte_ether/rte_flow_driver.h
> >> +++ b/lib/librte_ether/rte_flow_driver.h
> >> @@ -88,7 +88,7 @@ struct rte_flow_ops {
> >>  	int (*query)
> >>  		(struct rte_eth_dev *,
> >>  		 struct rte_flow *,
> >> -		 enum rte_flow_action_type,
> >> +		 const struct rte_flow_action *,
> >>  		 void *,
> >>  		 struct rte_flow_error *);
> >>  	/** See rte_flow_isolate(). */
> >> --
> >> 2.14.3
> >



More information about the dev mailing list