[dpdk-dev] [PATCH v5] ethdev: check Rx/Tx offloads
Wei Dai
wei.dai at intel.com
Thu Apr 26 16:37:46 CEST 2018
This patch check if a requested offloading is supported
in the device capability.
Any offloading is disabled by default if it is not set
in rte_eth_dev_configure( ) and rte_eth_[rt]x_queue_setup().
A per port offloading can only be enabled in
rte_eth_dev_configure(). If a per port offloading is
sent to rte_eth_[rt]x_queue_setup( ), return error.
Only per queue offloading can be sent to
rte_eth_[rt]x_queue_setup( ). A per queue offloading is
enabled only if it is enabled in rte_eth_dev_configure( ) OR
if it is enabled in rte_eth_[rt]x_queue_setup( ).
If a per queue offloading is enabled in rte_eth_dev_configure(),
it can't be disabled in rte_eth_[rt]x_queue_setup( ).
If a per queue offloading is disabled in rte_eth_dev_configure( ),
it can be enabled or disabled( ) in rte_eth_[rt]x_queue_setup( ).
This patch can make such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
Signed-off-by: Wei Dai <wei.dai at intel.com>
---
lib/librte_ether/rte_ethdev.c | 56 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index f0f53d4..5485f47 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1196,6 +1196,28 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
ETHER_MAX_LEN;
}
+ /* Any requested offload must be within its device capability */
+ if ((local_conf.rxmode.offloads & dev_info.rx_offload_capa) !=
+ local_conf.rxmode.offloads) {
+ RTE_PMD_DEBUG_TRACE("ethdev port_id=%d requested Rx offloads "
+ "0x%" PRIx64 " doesn't match Rx offloads "
+ "capability 0x%" PRIx64 "\n",
+ port_id,
+ local_conf.rxmode.offloads,
+ dev_info.rx_offload_capa);
+ return -EINVAL;
+ }
+ if ((local_conf.txmode.offloads & dev_info.tx_offload_capa) !=
+ local_conf.txmode.offloads) {
+ RTE_PMD_DEBUG_TRACE("ethdev port_id=%d requested Tx offloads "
+ "0x%" PRIx64 " doesn't match Tx offloads "
+ "capability 0x%" PRIx64 "\n",
+ port_id,
+ local_conf.txmode.offloads,
+ dev_info.tx_offload_capa);
+ return -EINVAL;
+ }
+
/*
* Setup new number of RX/TX queues and reconfigure device.
*/
@@ -1547,6 +1569,23 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
&local_conf.offloads);
}
+ /*
+ * Only per-queue offload can be enabled from application.
+ * If any pure per-port offload is sent to this function, return -EINVAL
+ */
+ if ((local_conf.offloads & dev_info.rx_queue_offload_capa) !=
+ local_conf.offloads) {
+ RTE_PMD_DEBUG_TRACE("Ethdev port_id=%d rx_queue_id=%d "
+ "Requested offload 0x%" PRIx64 "doesn't "
+ "match per-queue capability 0x%" PRIx64
+ " in rte_eth_rx_queue_setup( )\n",
+ port_id,
+ rx_queue_id,
+ local_conf.offloads,
+ dev_info.rx_queue_offload_capa);
+ return -EINVAL;
+ }
+
ret = (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
socket_id, &local_conf, mp);
if (!ret) {
@@ -1681,6 +1720,23 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
&local_conf.offloads);
}
+ /*
+ * Only per-queue offload can be enabled from applcation.
+ * If any pure per-port offload is sent to this function, return -EINVAL
+ */
+ if ((local_conf.offloads & dev_info.tx_queue_offload_capa) !=
+ local_conf.offloads) {
+ RTE_PMD_DEBUG_TRACE("Ethdev port_id=%d tx_queue_id=%d "
+ "Requested offload 0x%" PRIx64 "doesn't "
+ "match per-queue capability 0x%" PRIx64
+ " in rte_eth_tx_queue_setup( )\n",
+ port_id,
+ tx_queue_id,
+ local_conf.offloads,
+ dev_info.tx_queue_offload_capa);
+ return -EINVAL;
+ }
+
return eth_err(port_id, (*dev->dev_ops->tx_queue_setup)(dev,
tx_queue_id, nb_tx_desc, socket_id, &local_conf));
}
--
2.7.5
More information about the dev
mailing list