[dpdk-dev] [PATCH 2/2] net/mlx5: add Rx and Tx tuning parameters

[Nélio Laranjeiro]

On Sun, Apr 29, 2018 at 09:03:08PM +0300, Shahaf Shuler wrote:
> A new ethdev API was exposed by
> commit 3be82f5cc5e3 ("ethdev: support PMD-tuned Tx/Rx parameters")
> 
> Enabling the PMD to provide default parameters in case no strict request
> from application in order to improve the out of the box experience.
> 
> While the current API lacks the means for the PMD to provide the best
> possible value, providing the best default the PMD can guess.
> The values are based on Mellanox performance report and depends on the
> underlying NIC capabilities.
> 
> Cc: erezsc at mellanox.com
> Cc: amira at mellanox.com
> Cc: olgas at mellanox.com
> 
> Signed-off-by: Shahaf Shuler <shahafs at mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_ethdev.c | 51 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
> index 588d4ba627..78354922b0 100644
> --- a/drivers/net/mlx5/mlx5_ethdev.c
> +++ b/drivers/net/mlx5/mlx5_ethdev.c
> @@ -417,6 +417,56 @@ mlx5_dev_configure(struct rte_eth_dev *dev)
>  }
>  
>  /**
> + * Sets default tuning parameters.
> + *
> + * @param dev
> + *   Pointer to Ethernet device.
> + * @param[out] info
> + *   Info structure output buffer.
> + */
> +static void
> +mlx5_set_default_params(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
> +{
> +	struct priv *priv = dev->data->dev_private;
> +
> +	if (priv->link_speed_capa & ETH_LINK_SPEED_100G) {
> +		if (dev->data->nb_rx_queues <= 2 &&
> +		    dev->data->nb_tx_queues <= 2) {
> +			/* Minimum CPU utilization. */
> +			info->default_rxportconf.ring_size = 256;
> +			info->default_txportconf.ring_size = 256;
> +			/* Don't care as queue num is set. */
> +			info->default_rxportconf.nb_queues = 0;
> +			info->default_txportconf.nb_queues = 0;
> +		} else {
> +			/* Max Throughput. */
> +			info->default_rxportconf.ring_size = 2048;
> +			info->default_txportconf.ring_size = 2048;
> +			info->default_rxportconf.nb_queues = 16;
> +			info->default_txportconf.nb_queues = 16;
> +		}
> +	} else {
> +		if (dev->data->nb_rx_queues <= 2 &&
> +		    dev->data->nb_tx_queues <= 2) {
> +			/* Minimum CPU utilization. */
> +			info->default_rxportconf.ring_size = 256;
> +			info->default_txportconf.ring_size = 256;
> +			/* Don't care as queue num is set. */
> +			info->default_rxportconf.nb_queues = 0;
> +			info->default_txportconf.nb_queues = 0;
> +		} else {
> +			/* Max Throughput. */
> +			info->default_rxportconf.ring_size = 4096;
> +			info->default_txportconf.ring_size = 4096;
> +			info->default_rxportconf.nb_queues = 8;
> +			info->default_txportconf.nb_queues = 8;
> +		}
> +	}
> +	info->default_rxportconf.burst_size = 64;
> +	info->default_txportconf.burst_size = 64;

This can be fully re-written to simplify and ease the maintenance,
default values i.e. "Minimum CPU utilization" are duplicated, this can
be used as default values and just tweak in case the amount of queues
are different from 2 according to the link speed. 

> +}
> +
> +/**
>   * DPDK callback to get information about the device.
>   *
>   * @param dev
> @@ -458,6 +508,7 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
>  	info->hash_key_size = rss_hash_default_key_len;
>  	info->speed_capa = priv->link_speed_capa;
>  	info->flow_type_rss_offloads = ~MLX5_RSS_HF_MASK;
> +	mlx5_set_default_params(dev, info);
>  }
>  
>  /**
> -- 
> 2.12.0

Thanks,

-- 
Nélio Laranjeiro
6WIND