[dpdk-dev] [PATCH] mlx5: spelling fixes
Stephen Hemminger
stephen at networkplumber.org
Fri Aug 3 22:31:48 CEST 2018
Fix spelling errors in messages and comments.
Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
---
drivers/net/mlx5/mlx5_ethdev.c | 2 +-
drivers/net/mlx5/mlx5_flow.c | 4 ++--
drivers/net/mlx5/mlx5_mr.c | 8 ++++----
drivers/net/mlx5/mlx5_rxq.c | 20 ++++++++++----------
drivers/net/mlx5/mlx5_rxtx.c | 2 +-
5 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 34c5b95ee6d2..2c838e6539b6 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -1138,7 +1138,7 @@ mlx5_dev_interrupt_handler_install(struct rte_eth_dev *dev)
}
ret = mlx5_socket_init(dev);
if (ret)
- DRV_LOG(ERR, "port %u cannot initialise socket: %s",
+ DRV_LOG(ERR, "port %u cannot initialize socket: %s",
dev->data->port_id, strerror(rte_errno));
else if (priv->primary_socket) {
priv->intr_handle_socket.fd = priv->primary_socket;
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index b94c442ec4e6..d13178be6ba1 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -1090,7 +1090,7 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
item,
"L3 cannot follow an L4 layer.");
/*
- * IPv6 is not recognised by the NIC inside a GRE tunnel.
+ * IPv6 is not recognized by the NIC inside a GRE tunnel.
* Such support has to be disabled as the rule will be
* accepted. Issue reproduced with Mellanox OFED 4.3-3.0.2.1 and
* Mellanox OFED 4.4-1.0.0.0.
@@ -1100,7 +1100,7 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
RTE_FLOW_ERROR_TYPE_ITEM,
item,
"IPv6 inside a GRE tunnel is"
- " not recognised.");
+ " not recognized.");
if (!mask)
mask = &rte_flow_item_ipv6_mask;
ret = mlx5_flow_item_acceptable
diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c
index 1d1bcb5fe028..aa7ca355b4d8 100644
--- a/drivers/net/mlx5/mlx5_mr.c
+++ b/drivers/net/mlx5/mlx5_mr.c
@@ -446,7 +446,7 @@ mr_free(struct mlx5_mr *mr)
}
/**
- * Releass resources of detached MR having no online entry.
+ * Release resources of detached MR having no online entry.
*
* @param dev
* Pointer to Ethernet device.
@@ -496,7 +496,7 @@ mr_find_contig_memsegs_cb(const struct rte_memseg_list *msl,
}
/**
- * Create a new global Memroy Region (MR) for a missing virtual address.
+ * Create a new global Memory Region (MR) for a missing virtual address.
* Register entire virtually contiguous memory chunk around the address.
*
* @param dev
@@ -553,7 +553,7 @@ mlx5_mr_create(struct rte_eth_dev *dev, struct mlx5_mr_cache *entry,
* Find out a contiguous virtual address chunk in use, to which the
* given address belongs, in order to register maximum range. In the
* best case where mempools are not dynamically recreated and
- * '--socket-mem' is speicified as an EAL option, it is very likely to
+ * '--socket-mem' is specified as an EAL option, it is very likely to
* have only one MR(LKey) per a socket and per a hugepage-size even
* though the system memory is highly fragmented.
*/
@@ -604,7 +604,7 @@ mlx5_mr_create(struct rte_eth_dev *dev, struct mlx5_mr_cache *entry,
bmp_mem = RTE_PTR_ALIGN_CEIL(mr + 1, RTE_CACHE_LINE_SIZE);
mr->ms_bmp = rte_bitmap_init(ms_n, bmp_mem, bmp_size);
if (mr->ms_bmp == NULL) {
- DEBUG("port %u unable to initialize bitamp for a new MR of"
+ DEBUG("port %u unable to initialize bitmap for a new MR of"
" address (%p).",
dev->data->port_id, (void *)addr);
rte_errno = EINVAL;
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 16e1641d00bc..7c2d65ff2007 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -751,7 +751,7 @@ mlx5_rx_intr_disable(struct rte_eth_dev *dev, uint16_t rx_queue_id)
* Queue index in DPDK Rx queue array
*
* @return
- * The Verbs object initialised, NULL otherwise and rte_errno is set.
+ * The Verbs object initialized, NULL otherwise and rte_errno is set.
*/
struct mlx5_rxq_ibv *
mlx5_rxq_ibv_new(struct rte_eth_dev *dev, uint16_t idx)
@@ -1179,7 +1179,7 @@ mlx5_mprq_free_mp(struct rte_eth_dev *dev)
/**
* Allocate a mempool for Multi-Packet RQ. All configured Rx queues share the
- * mempool. If already allocated, reuse it if there're enough elements.
+ * mempool. If already allocated, reuse it if there are enough elements.
* Otherwise, resize it.
*
* @param dev
@@ -1234,7 +1234,7 @@ mlx5_mprq_alloc_mp(struct rte_eth_dev *dev)
*/
desc *= 4;
obj_num = desc + MLX5_MPRQ_MP_CACHE_SZ * priv->rxqs_n;
- /* Check a mempool is already allocated and if it can be resued. */
+ /* Check a mempool is already allocated and if it can be reused. */
if (mp != NULL && mp->elt_size >= obj_size && mp->size >= obj_num) {
DRV_LOG(DEBUG, "port %u mempool %s is being reused",
dev->data->port_id, mp->name);
@@ -1583,7 +1583,7 @@ mlx5_rxq_verify(struct rte_eth_dev *dev)
* Number of queues in the array.
*
* @return
- * The Verbs object initialised, NULL otherwise and rte_errno is set.
+ * The Verbs object initialized, NULL otherwise and rte_errno is set.
*/
struct mlx5_ind_table_ibv *
mlx5_ind_table_ibv_new(struct rte_eth_dev *dev, const uint16_t *queues,
@@ -1613,7 +1613,7 @@ mlx5_ind_table_ibv_new(struct rte_eth_dev *dev, const uint16_t *queues,
ind_tbl->queues[i] = queues[i];
}
ind_tbl->queues_n = queues_n;
- /* Finalise indirection table. */
+ /* Finalize indirection table. */
for (j = 0; i != (unsigned int)(1 << wq_n); ++i, ++j)
wq[i] = wq[j];
ind_tbl->ind_table = mlx5_glue->create_rwq_ind_table
@@ -1746,7 +1746,7 @@ mlx5_ind_table_ibv_verify(struct rte_eth_dev *dev)
* Number of queues.
*
* @return
- * The Verbs object initialised, NULL otherwise and rte_errno is set.
+ * The Verbs object initialized, NULL otherwise and rte_errno is set.
*/
struct mlx5_hrxq *
mlx5_hrxq_new(struct rte_eth_dev *dev,
@@ -1950,7 +1950,7 @@ mlx5_hrxq_ibv_verify(struct rte_eth_dev *dev)
* Pointer to Ethernet device.
*
* @return
- * The Verbs object initialised, NULL otherwise and rte_errno is set.
+ * The Verbs object initialized, NULL otherwise and rte_errno is set.
*/
struct mlx5_rxq_ibv *
mlx5_rxq_ibv_drop_new(struct rte_eth_dev *dev)
@@ -2009,7 +2009,7 @@ mlx5_rxq_ibv_drop_new(struct rte_eth_dev *dev)
* Pointer to Ethernet device.
*
* @return
- * The Verbs object initialised, NULL otherwise and rte_errno is set.
+ * The Verbs object initialized, NULL otherwise and rte_errno is set.
*/
void
mlx5_rxq_ibv_drop_release(struct rte_eth_dev *dev)
@@ -2032,7 +2032,7 @@ mlx5_rxq_ibv_drop_release(struct rte_eth_dev *dev)
* Pointer to Ethernet device.
*
* @return
- * The Verbs object initialised, NULL otherwise and rte_errno is set.
+ * The Verbs object initialized, NULL otherwise and rte_errno is set.
*/
struct mlx5_ind_table_ibv *
mlx5_ind_table_ibv_drop_new(struct rte_eth_dev *dev)
@@ -2096,7 +2096,7 @@ mlx5_ind_table_ibv_drop_release(struct rte_eth_dev *dev)
* Pointer to Ethernet device.
*
* @return
- * The Verbs object initialised, NULL otherwise and rte_errno is set.
+ * The Verbs object initialized, NULL otherwise and rte_errno is set.
*/
struct mlx5_hrxq *
mlx5_hrxq_drop_new(struct rte_eth_dev *dev)
diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
index 2d14f8a6edbd..95cbc513ca7b 100644
--- a/drivers/net/mlx5/mlx5_rxtx.c
+++ b/drivers/net/mlx5/mlx5_rxtx.c
@@ -1507,7 +1507,7 @@ txq_burst_empw(struct mlx5_txq_data *txq, struct rte_mbuf **pkts,
mpw.wqe->eseg.cs_flags = cs_flags;
} else {
/* Evaluate whether the next packet can be inlined.
- * Inlininig is possible when:
+ * Inlining is possible when:
* - length is less than configured value
* - length fits for remaining space
* - not required to fill the title WQEBB with dsegs
--
2.18.0
More information about the dev
mailing list